Piston.my

classic models

A car model can usually be in production for up to 10 years, though it is usually around 5 or 6 years today. With each model change, the design will evolve in tune with trends and consumer tastes. Only very few models – like the Volkswagen Beetle – could last decades unchanged. Eventually, the discontinued models fade away, but some are also remembered and collectors preserve them as they are special in one way or another.

Skoda, with a history of 125 years, has obviously produced many models and some have been significant. As part of the Czech carmaker’s 125th anniversary celebrations, a group of designers from across the brand have re-imagined some classic models and repurposed them for the modern era.

They picked 5 of the most iconic models and came out with designs of what those models would look like if they were to be done today, in the 21st century. These are model that defined the look and feel of Czech design and each one chosen is a personal favourite of the designer responsible.

Skoda has no specific plans to develop any of the designs, but the project gave the team inspiration from the past, the present and future environments.

To know about other promotions at BHPetromart, visit www.bhpetrol.com.my.

VOITURETTE
This design takes inspiration from the brand’s first-ever production car, the Voiturette A. Created by Yuhan Zhang – a member of the interior design team at Skoda – the Voiturette study is an open-top 2-seater carriage designed for use as a fully autonomous tourist car for the streets of Prague, the capital city of the Czech Republic.

Skoda Voiturette study

Skoda Voiturette study

The interior features a dramatic curved information panel while the wraparound seat takes its inspiration from the single seat unit fitted to the 1905 original. Commenting on her design, Zhang explained: “I wanted to make a connection between the history of Skoda and beauty of Prague. There is a big display in the car presenting a description of the sights as you go, but it could also show passengers the history of Skoda.”

1203 CAMPER
Another iconic model to get a dramatic makeover is the 1203 van, which has been transformed into a 21st century campervan. The brainchild of interface designer Daniel Hajek, the 1203 formed the backbone of Czech industry through the 1970s, becoming the default choice for trade, governments and the emergency services. Production ran from 1968 until the late 1990s.

Skoda 1203 Camper study

The 21st century version imagined by Hajek features an electric drivetrain that allows for even greater space inside, along with a pop-up roof and all the practical touches found in today’s Skodas.

Skoda 1203 Camper study

In terms of exterior design, the modern 1203 Camper features a number of touches that combine old with new. “I thought long and hard about how to reference the original’s round lights without them being too retro,” explained Hajek. “That’s why there’s just a hint of some curves here, but otherwise the light signature is new and bold.”

FELICIA CABRIOLET
The 1959 Felicia provided interior designer Martin Leprince with the starting point for his design makeover. Like the open-top original, the 21st century one is a masterclass in design elegance – wrapping itself around the passenger compartment while maximising exposure to the elements.

Skoda Felicia concept

While working on the project Leprince spent hours with an original example kept at the Skoda museum. Among the many details he admired was the wraparound windscreen – and set about updating the look for his new version. As the design shows, the Felicia study has a ‘floating’ windscreen that hovers a few centimetres above the body and curves inwards to serve as the instrument panel and infotainment display.

Skoda Felicia concept

“I studied glass statues, and with the help of photographs and pictures I tried to come up with a way to draw a 3D glass object so that the whole was comprehensible and looked realistic. That kept me busy for quite a few days,” he explained.

POPULAR MONTE CARLO and 130RS
Sporting glory was the inspiration behind the final pair of re-imagined Skoda classics. Interior designer Ljudmil Slavov chose to recreate the brand’s classic Popular Monte Carlo, while fellow stylist Aymeric Chertier opted to update the 130RS coupe.

Skoda MonteCarlo study

“The Popular Monte Carlo is one of the most beautiful cars ever made, and I found its history fascinating as well. It is incredibly elegant and tasteful,” said Slavov. As part of his makeover, the Bulgarian-born designer opted to give the car a dramatic new roadster look. Slavov also chose to replace the traditional centre speedo with a floating hologram and a wraparound screen.

Skoda 130RS

Skoda 130RS

The reborn 130RS (above) by contrast, is more recognisable as an homage to the original. “I wanted to refresh the original car, not change it,” stressed Chertier. “I retained its essence and characteristic lines and added certain details that we know from modern WRC cars, for example,” the designer said, explaining the retro feel combined with the distinctive muscular shapes of his car.

The original Range Rover was launched in 1969 and final production took place in 1996. It has come to be known as the Classic Range Rover and can be regarded as the first premium 4×4 (the ‘SUV’ term didn’t exist then). Well-kept units are collectors items and with the engineering having been robust, they remain capable vehicles even today.

Electrifying classic models
For those who want the Classic Range Rover, there is also a new source from Lunaz, a company in England that specialises in making electric classic cars. Lunaz has earlier ‘electrified’ Jaguar, Bentley and Rolls-Royce classics and now intends to also create an initial run of 50 original Range Rovers built in the ‘classic era’ between 1970 and 1994.

Lunaz Electric Range Rover Classic

The original Range Rover which as produced between 1969 and 1996.

Since unveiling its electrified classics, Lunaz has received requests from customers to apply its re-engineering and restoration approach to the Range Rover. In response to this, the company has decided to offer two versions – the ‘Town’ and ‘Country’ specifications – which can be delivered in mid-2021.

The more urban expression of these cars will be presented with increased focus on rear-seat and driver comfort, reflecting their dual use as either self-driven luxury vehicles or chauffeured cars. They will be available in both standard and long wheelbase and either the classic 3-door configuration or the 4-door models.

Lunaz has been converting these other classic models with electric powertrains. These include the Jaguar XK120 (below).

Modern engineering, classic looks
The ‘Country’ specification will include a full suite of engineering, technological and design features that augment a full electric classic off-roading experience for the first time. Every vehicle Lunaz produces goes through a full bare metal restoration and re-engineering process ahead of conversion to the company’s proprietary electric powertrain. This approach allows Lunaz to answer the questions of usability and reliability that detract from the experience of owning the most celebrated classic cars in the world.

The electric classic Range Rovers will include a 4-wheel drive system, updated suspension including anti-roll bars and uprated brakes. Within the cabin, the pure utility of the original interior design will be significantly elevated. The Lunaz design philosophy balances the integration of technology and usability within a classic architecture.

Design Director Jen Holloway and her team will work in close consultation with customers to tailor the car to their exact requirements. Material palettes that honour the textile interior that debuted on the original classic Range Rover will be offered as well as more traditional upholstery options with the very finest leathers and woods.

Usability is further enhanced with the inclusion of a full suite of contemporary technologies. Modern conveniences and features will include an infotainment system, air conditioning and entertainment screens integrated into the existing design scheme to ensure the spirit of the original car is maintained.

Lunaz Electric Range Rover Classic

Electric vehicles have usually been expensive due to the advanced and new technologies but those that have become mainstream models have the benefit of economies of scale to push prices down. Not so with the classic electric Range Rovers by Lunaz which are expected to start at £245,000 (about RM1.33 million), ex-factory. This is the price of exclusivity and being one of 50 owners in the world.

You don’t have to wait 20 years for a fully-electric Rolls-Royce

BHPetrol

The much-loved Volkswagen Beetle ceased production twice – the first time in 2003 after a 39-year run and the second time in July this year. With the second event, Volkswagen made it clear that the model line will not have a successor.

However, as with any model that is so iconic, fading into history is not going to happen easily. Even with the first and original generation, there are many units preserved by collectors which will be around for decades to come.

Electrifying the Beetle
And even at Volkswagen, a subsidiary known as Volkswagen Group Components has come up with a holistic concept for the electrification of the historic model. The conversion exclusively uses new parts they have mutually agreed on from the mass production of Volkswagen Group Components. The electric drive, the 1-speed gearbox and the battery system are based on the new VW e-up!. The conversion of the historic Beetle is being carried out by the specialist company eClassics.

The e-Beetle

The e-Beetle
Unlike the original model, there is no engine in the rear compartment of the e-Beetle.

“The electrified Beetle combines the charm of our classic car with the mobility of the future. Innovative e-components from Volkswagen Group Components are under the bonnet – we work with them to electrify historically important vehicles, in what is an emotional process,” explained Thomas Schmall, Member of the Board of Management of Volkswagen Group Components. “We are also providing Beetle owners with a professional conversion solution, using production parts of the highest quality.”

New VW e-up! as technical basis
The technical basis for the conversion is provided by tested production parts from Volkswagen’s new e-up! These are manufactured at Volkswagen Group Components production sites. The components work together in the e-Beetle as an electric drive that reaches performance peaks of 60 kW/82 ps. The lithium-ion battery pack is built into the underbody and consists of up to 14 modules, each with a capacity of 2.6 kWh, cumulatively delivering energy of up to 36.8 kWh.

The electric drive of the e-Beetle

The e-Beetle
Under the rear tail light unit on the right side is the port for recharging the battery pack.

The higher performance and the increased weight due to the extent of electrification require the adaptation and reinforcement of the chassis and the brakes. Despite the new total weight of 1,280 kgs, the e-Beetle accelerates to 50 km/h in just under 4 seconds and to 80 km in just over 8 seconds.

The range of the e-Beetle, which reaches top speeds of up to 150 km/h, is 200 kms – a comfortable distance for a relaxing day out in a classic car with a ‘new heart’. In the event that the e-Beetle runs out of electricity during the trip, fast charging is possible via a combined charging system. As a result, the e-Beetle can store enough energy for a journey of over 150 kms after recharging for around an hour. That would be about the time spent at a cafe along the way.

The e-Beetle

Concept can be transferred
Based on this concept, the subsequent electrification of other historic vehicles will also be possible. We are already working together to prepare the platform for the Bus. An e-Porsche 356 could also be pursued in the future,” Mr. Schmall hinted. The use of the modular electric drive matrix (MEB) is also being considered. This creates additional opportunities regarding performance and range.

About Volkswagen Group Components
As an entrepreneurially independent business unit under the umbrella of Volkswagen AG, Volkswagen Group Components is responsible for the development and production of strategic components for the Group’s vehicle-producing brands. 80,000 employees work in over 60 plants at 47 production sites worldwide in five business areas – Engine and Foundry, Gearbox and Electric Drive, Chassis, Seats and Electric Mobility. They develop and manufacture vehicle components, shape future topics such as charging infrastructure and battery recycling – and thus make a decisive contribution to the value of the Volkswagen Group, its brands and products.

Click here for other news and articles about the Beetle in PISTON.MY

PISTON.MY

Archive

Follow us on Facebook

Follow us on YouTube