Piston.my

Pirelli

Pirelli’s Cinturato tyre is a historically significant product, having possessed a revolutionary design approach. Its structure has a belt encircling the radial carcass, and this provided a higher level stability that made it especially suitable for the growing number of high-performance cars as well as in motorsport.

From the time it was launched into the market in 1951, the Cinturato has had safety as its key proposition. Although its initial popularity was among sportscar owners and luxury models, the tyre became popular in other segments as its enhanced safety was appreciated and desired.

Over the decades, the Cinturato evolved with different versions to meet specific needs of different segments of the market. In 2022, this includes the Cinturato Rosso which has a strong focus on safety and comfort (including quietness) as long life.

These are basic requirements of a broad segment of motorists and Pirelli is marketing the tyre as a  replacement tyre, rather than as original fitment by carmakers. It is suitable for passenger vehicles, including compact SUVs and also MPVs, so it covers a very broad section of the market.

 

The Cinturato Rosso has been engineered to deliver good performance on both wet and dry surfaces with a number of features on its ample tread. For instance, the transverse grooves have variable depths and together with the 5o longitudinal channels, there is very efficient removal of water from under the tyre to reduce the risk of aquaplaning.

On dry surfaces, the tyre also has optimum grip not only for sharp handling but more importantly, short stopping distances. The high shoulder curvature and 6% broader footprint area put more rubber on the road to maximise grip.

But high performance tyres sometimes have too much focus on performance that comfort is compromised. Because the Cinturato Rosso is intended for everyday drivers in ‘normal’ cars, attention has been given to ensuring a comfortable ride. This is achieved with full grooved ribs with progressive phasing of the sipes. The noise generated by the tyre is lower and this matters a lot especially in European environments, and it also benefits the occupants who enjoy a quieter journey.

Full grooved ribs with progressive phasing of the sipes

With inflation bumping up living costs, consumers will appreciate a tyre that can last long. To provide improved mileage, the Cinturato Rosso has additional sipes on the centre rib to give more uniform tread pattern stiffness. The more event contact with the road will moderate wear and depending on driving conditions, give the tyre a longer service life. Factory tests against the Cinturato P1 show an 8% improvement.

Proof of better performance
Pirelli’s regional office organized a series of tests at the Sepang Circuit to allow the media to experience for themselves the performance claims. The tests were straightforward braking tests on wet and dry surfaces using Toyota Camrys fitted with Cinturato Rosso and Cinturato P1 tyres so that comparisons could be made.

Different drivers got different braking distances from a speed of around 80+ km/h. The distances ranged from 26 metres to 30 metres and when braking on the Cinturato Rosso, there was a difference of about 2 or 3 metres. That distance could make the difference between stopping in time to avoid colliding with a vehicle ahead or hitting it and having an expensive repair bill.

To experience the quietness, we were offered a ride in a Toyota Alphard, which is a suitable vehicle for such a test since it is already well insulated as a premium MPV. The level of quietness was not really surprising then but it was apparent that the Pirelli tyres (like other tyres) still could not overcome the noise generated by some of the rough sections of our road surfaces. This has nothing to do with the tyres but is just the way they surface the road.

We understand that the Cinturato Rosso tyres sold in Malaysia come from a Pirelli factory in China. That they can be priced from RM250 (up to RM1.500, depending on the size) is certainly noteworthy for such an established brand better known for high-performance tyres (they supply tyres to all the F1 teams). As mentioned earlier, the extremely competitive market at the lower end makes it difficult for the reputable global players to offer attractively priced products because there is a minimum standard of quality they will not compromise on.

Pirelli’s Track Adrenaline system can make you a better driver on the track

 

The 2022 Formula 1 World Championship will see the biggest changes in technical rules in some 4 decades. Among those changes – which are expected to contribute to close racing with more overtaking – are the switch 18-inch wheel rims from the current 13 inches. This means installing new low-profile tyres from Pirelli, which continues to be the tyre-supplier for F1.

13 inches since 1960s
Tyres in 13-inch size have raced for nearly the entire history of the championship to date, from the 1960s. Nonetheless, at the time – and into the subsequent decade – there was still a lot of regulatory freedom around wheel size. In the 1980s, 13 inches finally became the definitive size.

Pirelli first ran a 13-inch tyre in Formula 1 at the 1981 San Marino Grand Prix with the Toleman. Then, in the same season (Michelin and Goodyear supplied tyres then) and subsequent ones, other teams adopted the Italian tyres for their cars. Since 2011, Pirelli has been the sole tyre-supplier for the sport.

The first win for Pirelli’s 13-inch tyres came at the 1985 French Grand Prix, fitted on Nelson Piquet’s Brabham-BMW. Pirelli brought in a new generation of 13-inch tyres from 1989 (two years after the P Zero name was born) which were used until 1991. As Global Tyre Partner from 2011, Sebastian Vettel was the first to claim a championship for a Pirelli 13-inch tyre with Red Bull.

Wider tyres, faster lap times
In 2017, Pirelli innovated by introducing tyres that were 25% wider than they had been previously, providing a bigger footprint and more grip, which in turn resulted in lap records being lowered all over the world.

Since becoming sole supplier, more than 400,000 13-inch tyres have been produced from the Pirelli factories at Izmit in Turkey and Slatina in Romania.

Testing since 2014

The 18-inch tyres have been tested on F1 cars since 2014 when Pirelli first ran such tyres at a test at Silverstone with Lotus reserve driver Charles Pic. Initially, it was the intention to adopt 18-inch tyres from 2021 as part of a package of new technical regulations, but this was deferred to 2022 due to the disruption of the COVID-19 pandemic.

In the meantime, Pirelli successfully ran 18-inch tyres in Formula 2 since the 2020 season and completed 36 days of 18-inch testing with Formula 1 cars that were modified to accommodate the new size. It’s actually the size of the rim that changes, adding 5 inches (127 mm) to the diameter that has been a constant in GP racing since the 1960s. This has been characterized by compact, very wide tyres featuring a ‘pot-bellied’ sidewall seen on four corners of the racing cars.

With a bigger emphasis on technological proximity to the road car as well as aesthetics, the brand new P Zero F1 tyre has the same tread width as before (305 mm at the front and 405 mm at the rear) but a slightly bigger overall diameter, which grows from 660 mm to 720 mm. The most significant change is a reduction in the sidewall, which now resembles that of the low-profile Pirelli tyres that, for years, have been seen on many performance road cars.

Less turbulence, closer racing
This new profile will change the behaviour of the racing cars, making them more precise when changing direction. From the tests carried out so far – in both dry and wet conditions – the drivers’ feedback has been positive, and the new tyres will contribute to even more competitive races, with cars that are less sensitive to aerodynamic turbulence while following behind one another (so racing can be closer). The lower sidewall also means that the tyre will flex less, meaning that it will have less impact on the overall aerodynamics of the car.

The compounds for the 18-inch tyres will also be completely new, to ensure maximum consistency and less overheating. Five compound grades will be available for the 2022 championship, three of which will be chosen for each race weekend (as has been the case this year).

Pirelli tyres were on the racing cars during the first years of Formula 1 in the 1950s,

By going from 13-inch to 18-inch, Pirelli is the only tyre manufacturer that has competed in Formula 1 with all the wheel sizes that have been part of the World Championship’s history. It’s a story that began in 1950, with its first wins and titles with Alfa Romeo, Ferrari and Maserati. Those were front-engined racing cars that ran on tall and narrow tyres.

The Abu Dhabi Grand Prix at Yas Marina over the weekend was the last race in F1 history where the cars ran on 13-inch tyres. To celebrate the ‘changing of the guard’, all the 13-inch slick tyres used in the race had a special logo on the sidewall: ‘Next year I turn 18’.

A look at the Formula 1 racing car of 2022

Pirelli is the first company in the world to produce a range of FSC-certified (Forest Stewardship Council) tyres which represent a new horizon for increasingly sustainable tyre production. The tyres are made from rayon and FSC-certified natural rubber which comes from FSC-certified plantations.

What is FSC?
FSC forest management certification confirms that plantations are managed in a way that preserves biological diversity and benefits the lives of local people and workers, while ensuring it sustains economic viability. In Malaysia, 684,913 hectares of plantations are FSC-certified (as of January 2021).

The complex FSC chain of custody certification process verifies that FSC-certified material has been identified and separated from non-certified material as it makes its way along the supply chain, from the plantations to the tyre manufacturer.

Malaysia has 684,913 hectares of plantations FSC-certified to preserves biological diversity and benefits the lives of local people and workers.

First fitment on BMW X5 PHEV
The world’s first FSC-certified tyre is the Pirelli P Zero and the first vehicle in the world to have it as Original Equipment is the BMW X5, specifically the xDrive45e Plug-in-Hybrid. It is sized 275/35 R22 for the front wheels and 315/30 R22 for the rear wheels.

The use of this tyre complements the ‘green’ philosophy of the PHEV. The BMW Group has also conducted a full-cycle CO2 certification for the X5 xDrive45e from raw material procurement, the supply chain, manufacturing and the use phase, all the way to recycling.

“As a premium manufacturer, we aspire to lead the way in sustainability and take responsibility,” said Andreas Wendt, member of the Board of Management of BMW AG responsible for Purchasing and Supplier Network. “We have been committed to improving cultivation of natural rubber and increasing transparency in the supplier network since 2015. The use of tyres made of certified natural rubber is a pioneering achievement for our industry. In this way, we are helping preserve biodiversity and forests to counteract climate change.”

Low rolling resistance and quieter
The new tyre, produced only at Pirelli’s factory in the USA, is designed to specifically target environmental sustainability along with low rolling resistance as well as lower noise levels.

The FSC certification for the natural rubber used to make the new P ZERO tyre for BMW’s X5 Plug-in-Hybrid procured from certified plantations is the latest step on the path that Pirelli has been on for many years towards the sustainable management of the natural rubber supply chain. This is achieved through a roadmap of activities based on the training and sharing of good practices in the countries of origin of the material, in line with the principles and values contained in the Pirelli Sustainable Natural Rubber Policy, which was issued in 2017.

To know more about the X5 PHEV or other BMW models in Malaysia, visit www.bmw.com.my.

‘The Boss’ gets electrified with the new BMW X5 xDrive45e M Sport

The National Vaccination Program in Malaysia is free of charge.

Run-flat tyres, though seemingly a recent development, have been around since the 1930s although they were not as commercialized like today. From the 1980s onwards, most of the major manufacturers developed tyres that could continue to be used even when the air pressure was lost due to a puncture. This capability was initially required for military vehicles as well as vehicles carrying important people that might be attacked.

Eventually, run-flat tyres entered the market and appealed to carmakers because they not only provided extra safety and convenience but also gave the possibility of leaving out the spare tyre and saving some weight. Of course, due to the technology they have, they are more expensive than normal tyres but are an acceptable extra cost for premium luxury models.

Keeping rallycars running
At Pirelli, development of run-flat tyres began in the 1990s, mainly to provide tyres for rally drivers to continue even with a puncture, rather than being stranded by the side of the road. New technology was tried and tested in rallies by teams associated with the tiremaker. These had a reinforced structure that mad the tyres stronger and able to still run for several minutes after air was lost. In competition, those few minutes made a big difference.

As another example of technology from competition being transferred to road-going cars, Pirelli was able to use the same technology from its first run-flat tyres to offer motorists in 2001. However, as comfort was not a priority when the tyres were used on rallycars, the early run-flat tyres were hard and ride comfort was not so good initially.

Providing tyres that could keep rallycars running even with punctures helped Pirelli to develop run-flat technology.

Improvement in comfort for road use
Nevertheless, Pirelli carried out R&D into new materials and processes to improve comfort and also other aspects such as grip and handling. Thanks to new technology in the tyre’s structure as well as advances in the materials used, the way that the tyres absorb bumps in the road has been refined over time, to the point that they can now offer the same levels of comfort as standard tyres. To use run-flat tyres, engineers have to tune the suspension of the cars accordingly.

The key advantage of having a run-flat tyre is that the driver does not have to stop and change to the spare tyre when a puncture occurs. It is possible to continue for some distance, at least to a tyre shop where the puncture can be fixed or the tyre replaced. However, there are speed limitations (around 80 km/h) and the tyre is intended for emergency use and not long-term use.

Pirelli’s Self Supporting system (blue areas) is incorporated in the sidewalls for specific reinforcement which allows a deflated tyre to support lateral and transverse loads of the vehicle even in the absence of air pressure.

Original fitment by many carmakers
Over the last 20 years, Pirelli’s engineers have developed more than 1,000 different types of tyre featuring run-flat technology of different sizes and seasonal applications. To date, the company has supplied more than 70 million run-flat tyres, mostly as original fitment on models by BMW, Mini, Mercedes-Benz, Alfa Romeo, Audi and others.

Good for EVs
Run-flat tyres are also of interest to manufacturers of electric vehicles, which still need tyres to run on. Being able to leave out the spare tyre or even not have to carry a repair kit can mean less weight on board and that can help in adding to the cruising range. Additionally, the space that is usually allocated for a spare tyre can be utilized for the battery pack.

2021 Mercedes-Benz EQA
Run-flat tyres are also good for electrically-powered cars which need to be as light as possible, so not having the weight of a spare wheel helps.

Run-Flat technology will therefore also play an important role in electric vehicles as well as autonomous vehicles, the latter by helping the vehicle remain under control even in an emergency situation.

Some of the Pirelli run-flat tyres include Pirelli Elect and PNCS noise-cancelling technology. The former is dedicated to electric vehicles and is focussed on low rolling resistance, reduced tyre noise, immediate grip, and a structure that can support the weight of a battery-powered vehicle. PNCS is focussed on reducing perceived tyre noise inside the cabin, thanks to the use of special sound-deadening material on the inside of the tyre.

So long as motor vehicles run on wheels, tyres will be needed and run-flat technology will remain an important element. Pirelli continues to improve its run-flat tyre range as new technologies become available and affordable, with a view of future requirements by the industry and motorists.

The 2021 Formula 1 World Championship starts off this weekend in Bahrain, instead of Australia where the first round has traditionally been. So instead of preparing for the circuit in Melbourne, tyre-suppliers Pirelli have had to change plans and select tyres for the circuit in the desert which has some of the most abrasive asphalt of the season.

At the 3-day pre-season test on the circuit, the teams had the entire P Zero range at their disposal, but many chose to concentrate on the three compounds nominated by Pirelli engineers. With the track having been used just 4 months ago, little about it will have changed since the teams were last there: giving them a stable basis to work from.

Windy testing conditions
The testing was influenced by the local conditions and the first day was consistently windy with gusts that reached 47 km/h, affecting the aerodynamics on the cars. As a result of the wind, there was plenty of sand on the track that compromised grip. Temperatures were also particularly high, so the combination of these factors led to some surface overheating and increased tyre degradation.

On the second day, the wind still remained but temperatures were lower, which reduced the overheating. As a result, the teams had a better balance with their cars, with plenty of set-up work carried out over generally short runs, as was the case on the opening day.

The third and final day was run in better track conditions with moderate winds and a cool breeze but track temperatures similar to the first day. Many teams carried out long runs using the compound tyres nominated.

The three compounds
The three compounds are C2 as the P Zero White hard, C3 as the P Zero Yellow medium, and C4 as the P Zero Red soft. This is the same nomination as last year’s Bahrain GP but there is a new tyre construction this year for the latest cars. The 2021 cars, in fact, have reduced downforce compared to last year, under the most recent technical rules.

The new tyres for 2021 have been designed to improve strength and durability, allowing them to run at lower pressures, while the actual compounds are the same as last year. During testing of the 2021 tyres last November in Bahrain, rear tyre pressure was reduced by 0.5 psi and front tyre pressure by 1.5 psi. Then, following telemetry analysis and the reduction of rear downforce in particular, rear tyre pressure was further reduced by 1.5 psi at recent test in Bahrain. This is now confirmed for the race.

The number of sets allowed per weekend is the same as last year (13) despite the there being an hour less of running, with Friday’s free practice sessions now cut to one hour each. As was the case last year, there’s a standard allocation for every car in 2021.

Racing after sunset
The Bahrain race is run at night and gets underway in the evening at 6 pm. After sunset, track temperatures that can fall quite rapidly once the race gets underway and this in turn affects tyre behaviour and therefore strategy.

The asphalt (with high granite content) in Bahrain is well-known for being abrasive, increasing tyre wear and degradation. Last year’s race – which featured a red flag and multiple safety car periods – was won by Mercedes-AMG driver Lewis Hamilton with a 2-stop strategy. Red Bull’s Max Verstappen, who finished second, was one of just two drivers to change tyres 4 times.

Condensed testing session
Commenting on the tyres, Mario Isola, Head of F1 and Car Racing at Pirelli, said: ”Just 4 months after having two races in Bahrain, and two weeks after 3 days of pre-season testing, we’re back there for the first race of the 2021 season. During the test, we saw many teams concentrated on the compounds nominated for the race, but the conditions we experienced in testing might not be entirely representative of the race.”

“The teams also ran a very wide variety of different programmes during just the one condensed session, whereas in the past, with two test sessions, the second session was usually more focussed on tyres. So it’s hard to draw many firm conclusions. With new specifications of cars and tyres, as well as the shortest pre-season in recent memory, the competition is wide open: especially given that the track characteristics of Bahrain have often resulted in interesting strategic battles, with a number of different tactics used,” he added.

The third 2022 18-inch tyre test of the year (the second one with slicks) will take place for 3 days in Bahrain after the race. Ferrari will run on the first day, with Alpine running on the final two days.

Yuki Tsunoda to drive for Scuderia AlphaTauri Honda in 2021 F1 championship

BHPetrol RON95 Euro4M

Track Adrenaline, a system from Pirelli, gives track day enthusiasts and driving schools a way analyse their driving style. At the same time, they can also learn how to best to manage tyres as sensors assess the conditions of the tyres such as pressure and temperature.

Track Adrenaline includes a high-precision GPS and an App which – thanks to ‘replay’ and ‘analysis’ functions – suggests how to improve performance on the track and get the best out of the tyres. In addition, a LIVE VIEW function is available for the passenger, if present.

The system comprises three main elements: a small portable central control unit which can be easily installed inside the vehicle; the Track Adrenaline App which can be downloaded for free onto compatible iPhones; and the P Zero Trofeo R tyres, already available in 7 sizes with the sensors installed in the internal lining of the carcass.

Pirelli Track Adrenaline system

Constant monitoring of tyre conditions
Before starting a drive, Track Adrenaline provides an overview of the condition of the tyres in a practical and rapid manner and, thanks to the digital manometer, configure the ideal set-up. During the drive, Track Adrenaline saves the information about the condition of the tyres and, at the same time, combines the data received from them with the telemetric information captured by the control unit.

This GPS module guarantees precision in the tracking and definition of trajectories as well as time measurements. Furthermore, the system’s database includes the principal race circuits so that the GPS can identify the track which is about to be tackled, including the position of the finishing line and of the split points.

The control unit, linked via wi-fi to the App, offers the experience of an extremely high-performance timer with telemetric data and real-time analysis of the session on the track. This includes the lap time, intermediate timings, expected time difference and the lap producing the best recorded time.

Pirelli Track Adrenaline system

Real-time guidance
On those occasions in which the driver is accompanied by a passenger, the LIVE VIEW function can also be used. Short and instant messages such as ‘WARM UP!’, ‘PUSH NOW!’, ‘COOL DOWN!’, ‘RESTORE PRESSURE!’, ‘BOX BOX BOX!’ associated with a simple colour code, enable the passenger to provide guidance to the driver.

Pirelli Track Adrenaline system

From track to sofa
Once the day at the track has finished, all the data gathered during the session is saved to the appropriate cloud and accessed at any time. The App also contains a ‘My Garage’ area where users can register all the cars for which they use Track Adrenaline and thus always have easy access to the particulars of their vehicles, the measurements of the tyres and the results of all the performances so that these can be compared with each other.

Pirelli to be sole tyre-supplier for FIA World Rally Championship

PISTON.MY

StayAtHome

Social distancing

Pirelli has been the tyre-supplier to Formula 1 teams since 2011 and from 2021, the tyremaker has also been chosen by the FIA as the sole supplier for the World Rally Championship (WRC). Taking over from Michelin, the supply contract is to run until the end of 2024.

Pirelli will supply all the 4WD cars that compete on the championship, from the WRC category that fights for the overall title, to the R5-specification WRC2 class, which is also the headlining category on regional and national championships throughout the world.

WRC
Pirelli will supply tyres to all classes in the WRC.

Commitment to supporting young drivers as well
“Our return to the top level of rallying is something that we were considering for a while, and it’s particularly fitting that this appointment from the FIA comes in the year that Ott Tanak – a graduate of the Pirelli Star Driver programme – was crowned World Champion. Supplying the WRC alongside F1 will enable us to improve our products still further by putting them against some of the most varied and demanding conditions seen in motorsport,” said Mario Isola, Pirelli’s Head of F1 and car racing.

Pirelli’s commitment to supporting the careers of young drivers is set to continue as well. Alongside the continued supply to the Junior WRC, Pirelli will also carry on equipping the Junior ERC3 class on the European Rally Championship.

Pirelli F1 WRC
Pirelli has been sole tyre-supplier to F1 since 2011 but its involvement in the WRC goes back longer.

25 world titles and 181 wins
The tyremaker has long experience in WRC, having been involved since 1973 and being the tyres used by teams that won 25 world titles and 181 WRC events. It was sole supplier to the WRC from 2008 to 2010 and since 2018, it has supplied tyres for drivers in the WRC2 category.

“Technology and passion are two key elements that Pirelli bring to motorsport, and these have allowed us to secure the single tyre supply for the World Rally Championship. We’ve supported young drivers in the Junior category for many years and now we’re returning to the top class as well,” said Giovanni Tronchetti Provera, Pirelli’s Senior Vice-President of Prestige and Motorsport.

He added that rallying has always been a perfect open-air laboratory for Pirelli’s engineers to test out new technologies that are eventually destined for road use, thanks to the extreme conditions that characterise the sport.

Pirelli WRC

Tyres to be supplied
Pirelli will supply the WRC teams with tyres that have already successfully been seen on different rally championships throughout the world. The P Zero RA is for asphalt, with different compounds available to suit the terrain and weather conditions. The Sottozero Snow (with or without studs) is used for snowy conditions, the Sottozero Ice J1 is specifically designed for Rally Sweden, while on gravel, the reinforced Scorpion K can cope with a wide variety of loose surface conditions.

PISTON.MY

Archive

Follow us on Facebook

Follow us on YouTube