Piston.my

Track Focused

Porsche has finally unveiled its 911 GT2 RS, a track-focused, rear-wheel drive sports car that features a race-bred chassis and rear axle steering. It’s a lightweight car, which is evident by the extensive use of carbon fiber reinforced plastic (CFRP) for the exterior mirrors, air intakes on the rear quarter panels, front luggage compartment lid, certain other parts of the rear and many of the interior components.

Porsche has also fitted a titanium exhaust system that weighs 7kg less than that in the 911 Turbo and is said to deliver a distinct yet pleasing exhaust note. The roof panel is made from magnesium, which should help lower the overall centre of gravity.

And if that isn’t enough, more weight can be shed by opting for the optional Weissach package. This gets you magnesium wheels, other trim panels made from carbon fiber, which include the roof, anti-roll bars and end links on both axles.

https://youtu.be/XWpTjUk0nb4

What really separates the GT2 from other 911 cars are the large air intakes and outlets on the bumpers as well as a unique rear wing that improve the car’s overall aerodynamic efficiency and increase downforce. Porsche says that the car has exceptional grip due to the race-bred chassis, rear axle steering capabilities and the ultra high performance tyres.

This GT2 RS has the same 3.8-litre engine as that found in the 911 Turbo S but power has been increased further by the use of larger turbocharger and a new additional cooling system for the intercoolers.

As such, the twin-turbo flat six engine produces 700bhp and 750Nm of torque which is about 80bhp and 50Nm more than its predecessor. Power is sent to the rear wheels via a customised GT 7-speed dual clutch (PDK) gearbox that offers maximum efficiency and uninterrupted torque transfer. It can go from 0-100km/h in just 2.8 seconds and reach a speed of 340km/h.

Despite being a track ready car, the GT2 RS does come with the usual electronic driver safety aids that include stability control and traction control. They make up the Porsche stability management system or PSM, which can be switched off in two states using ESC off and then ESC + TC off.

Inside, the car has a red Alcantara black leather upholstery and several carbon fiber trim pieces throughout the cabin. There’s a GT2 RS Sports steering wheel that is fitted as standard and so are the full bucket seats with carbon fiber reinforced backrests and Porsche Communication Management (PCM) system, which functions as the central control unit for audio, navigation, and communication. Porsche Connect Plus and the Porsche Track Precision app are also included as standard.

Porsche has also released a chronograph watch to mark the launch of this very special car, which will only be available exclusively to 911 GT2 RS owners. It is the first clock movement that Porsche Design can call their own and is housed within an elegantly made lightweight titanium body. The movement is a caliber 01.200 one that includes a flyback function, a load-path-optimized movement bridge, and an official COSC certificate of authenticity.

The Porsche 911 GT2 RS is available to order now but customers should receive their cars towards the end of this year or in early 2018.

Jaguar has finally revealed extensive details regarding its outrageously powerful version of its baby sedan, the XE. Dubbed Project 8, the car is said to be the most sought after contemporary Jag after the venerable F-Type.

Basically, its a track-focused XE that features an immensely powerful engine, which is kept in check by a thoroughly engineered suspension and chassis setup aimed at increasing agility and to a broader extent, better driving dynamics. As such, Project 8 sits 15mm lower than the base car thanks to the manually adjustable suspension.

The car is fitted with a highly tuned version of the automaker’s supercharged 5.0-litre V8 engine that produces close to 600bhp, a titanium variable active exhaust and an all-wheel-drive system as well as aerodynamic body work that help it stick to the road. As such, Project 8 is said to be the fastest accelerating Jaguar ever thanks to an 8-speed Quickshift transmission, a 0-100km/h time of just 3.3 seconds and a top speed of 322km/h.

When Track Mode is selected, the car’s system alters the driveline and stability systems as well as sharpens throttle and steering responses for track use, which should allow for more hooliganism within the confines of a controlled environment.

Unlike the standard XE, Project 8 features extensive bodywork upgrades that include front and rear carbon fibre bumper, enhanced cooling ducts, vented carbon fibre bonnet, flared bodywork over the 20-inch forged alloy wheels, adjustable front splitter, flat underbody trim pieces, rear diffuser and a massive rear wing that can be adjusted to alter air flow.

Underneath the skin are mechanicals that are more performance oriented compared to the more docile setup found on the base XE. Jag blessed the car with stiffer springs for the front and rear, manually adjustable continuously variable dampers, a new carbon ceramic braking system, Formula 1-style silicon nitride ceramic wheel bearings and a rear electronic active differential (EAD) with oil cooler.

The racecar inspired theme was incorporated in the cabin is well due to the use of carbon fibre and Alcantara for various trim panels/steering wheel. There are aluminium paddle shifters behind the steering wheel for drivers to initiate quick gear changes but this can also be done through the use of the centre mounted ‘Pistolshift’ lever – a first for Jaguar.

Designed by the company’s Special Vehicles Operations (SVO) team, Project 8 will only be available as a left-hand-drive model and will come in eight body colours which are Fuji White, Narvik Black and Caldera Red, Valencia Orange, Velocity Blue, Meribel White, Verbier Silver and Corris Grey (satin matte).

There are also two packages to choose from, which are the standard four-seat pack and a two seat track pack. The former features front performance seats with magnesium frames, and a more heavily contoured rear squab to maximize support. The latter gets you lightweight front carbon fibre racing seats with four-point harnesses fixed to a harness retention hoop in place of the rear seat.

Further customization for a more personal touch include opting for tri-coat paint finish, tinted clear coat and race-inspired decal packs.

The Jaguar XE SV Project 8 will be one of the main featured vehicles at the on going Goodwood Festival of Speed after which, the car should be made available for purchase.

Archive

Follow us on Facebook

Follow us on YouTube