Piston.my

Latest News

Regardless of whether we continue to be in control driving cars or a computer does the driving, the interior of a car will remain an important aspect of car design. In fact, as autonomous motoring grows, the driver may spend less time at the steering wheel and more time with the other occupants. In this case, the cabin layout may have to change to be more suitable.

The Renndienst study
At Porsche’s Weissach Development Centre in Germany, designing interiors is just as important as exteriors and for interiors, the User Experience (UX) is a vital part of the brand experience. In the book Porsche Unseen, the sportscar manufacturer recently published fifteen previously secret design studies. Among them is the Renndienst study. The 6-person van concept is reminiscent of the Volkswagen racing service van that once served the factory racing team as a service vehicle. On the outside, it’s futuristic and edgeless but on the inside, it’s a modular travel cabin.

Porsche interior design

For the Renndienst study, the designers at Style Porsche journeyed far into the future of mobility. They considered design visions for the day after tomorrow in order to derive steps for tomorrow. They asked themselves how far they can expand Porsche’s design language and to which products it could be applied.

“We thought about how we could still give a distinctly Porsche flair to a passenger compartment that is so far removed from the classic sports-car interior. And how autonomous driving could be designed, but we don’t assume that our customers want to give up using a steering wheel,” chief designer Michael Mauer explained. “In order to be able to think freely about the future, boundaries must be crossed when carrying out these ‘finger exercises’. This is how the central driver position of the Renndienst came about.”

“When I want to drive, I have more cockpit feeling than in any other car. And when I don’t, the driver’s seat can be rotated 180 degrees—with one swivel, it turns to face the other passengers. We worked on materializing these basic ideas for about a year,” he elaborated further on the study.

Looking at next overall innovation
The overall UX, when it comes to interior design, is dedicated to the digital lifestyle and the relationship between driver, passengers, and vehicle. “In the Taycan, we have shown how much we think ahead,” said Ivo van Hulten, Director of UX Design. “So we were looking at a possible next overall innovation. For this, we thought and worked from the inside out.”

Porsche interior design

The side windows are designed asymmetrically. “One side is closed; passengers can retreat there,” explained Markus Auerbach, Head of Interior Design. “The other side enjoys a large window bank for an unobstructed view outside. When we close the doors, the interior feels like a protective capsule.”

A feeling of security and comfort dominates the modular interior. The passengers in the first row sit offset to the right and left in ergonomically shaped bucket seats. They can enjoy an unobstructed view of the road ahead and of their own dashboard screens. The rear seat headrests are installed in a floating position, which allows a clear view through the rear window. The luxury of adaptable space is made possible by the powertrain which is fully electric and hidden in the underbody.

UX as a success factor
The customers of the future will be the smartphone generation. “In the past, the hunger for something new was satisfied with the purchase of the product. Today, many young people are no longer just fascinated by the aesthetics of a product, but by the opportunities it offers them,” said van Hulten.

Porsche interior design

The aesthetics of the interior therefore depend on many more factors than just shapes and materials. “The questions are: Is the interior modular enough to adapt to changing circumstances even a few years after purchase? Will I be able to run updates remotely and around the clock?” Van Hulten is confident of finding answers in the form of a new aesthetic.

“A digital journey can open a gateway to a universe for us, but it can never replace the physical experience. A car is a space that moves whether I’m driving it myself or not. The seats in this van have been designed for movement; they hold and support the body,” added Auerbach.

“The bench seat allows a different sitting angle due to its curved sides—we can turn towards each other. It is a particularly communicative area that invites relaxation, offering alternative seating positions for talking, working, and relaxing,” he explained.

The visions on which the specialist departments work together are complex because they design spaces where people sit. “Cars with an unsatisfactory interior do not survive for long – because no emotional connection can be built with them,” Auerbach noted.

Porsche interior design

Inspired by ‘Knight Rider’
In the next step, van Hulten wants the Renndienst to gain a soul. He remembers the American TV series Knight Rider, which he enjoyed watching as a child. “K.I.T.T., the talking car, fascinated me. The strong team of the protagonist and his vehicle really captured my imagination. I connected with the car because it had a soul,” he said.

Referring to the study, he asks the question: “What kind of daily interactions do we plan – in 30 years, will we call our car and then it will come around and pick us up?” From this grand vision of the day after tomorrow, the design team is now moving backwards in time to get the specific answer for tomorrow.

Porsche interior design

The materials of the future under consideration include renewable resources such as wood, reinterpreted and combined with metals or sustainable plastics. Wood was once banished from vehicles but could soon make a comeback. Auerbach also relies on what are known as ‘smart materials’ which can do something special—for example, such materials can respond to external factors and light up without being directly illuminated. Or materials that repeatedly change their shapes to perfectly fit the ergonomics of the occupants.

The designers constantly keep their minds fresh with the ‘first principle thinking’ method. In doing so, they move away from familiar analogies and break hypotheses down into their smallest components. They focus not on familiar forms but on functions that might be of interest in the future. They ask themselves what a Porsche could be—and what it could not be. This process provides answers to questions that no one has asked before.

Prototypes and studies Porsche has never before shown to the public

StayAtHome

Vaccination does not make you immune to COVID-19 infection. You can still get infected and you may not show symptoms but carry and spread the coronavirus. Do not stop taking protective measures such as wearing a facemask, washing hands frequently and social distancing.

Open-topped cars may not command big volumes but they are still very much in demand, at least in the upper levels of the market. So it is worthwhile engineering a convertible variant (and it’s not just a matter of leaving out the roof) as there will usually be more than enough buyers. That is likely to be the case with the new 765LT Spider, a complementary model to the 765LT ‘Longtail’ coupe that McLaren unveiled last year.

This new Spider is McLaren’s most powerful-ever convertible model and with only 765 cars to be available, it will be an exclusive McLaren with each unit having a pricetag starting from £310,500 in the UK (about RM1.823 million before Malaysian tax). MSO Clubsport Pack and MSO LT Black Pack options are available, plus other individual MSO options.

Carrying over the coupe’s dynamic and aerodynamic DNA with no structural compromise and only a minimal 49 kgs weight increase – primarily from the retractable hardtop and accompanying operating mechanism – the 765LT Spider weighs just 1,388 kgs,, which is 80 kgs lighter than a 720S Spider and around 100 kgs lighter than its closest comparable competitor.

High-performance lightweight materials feature throughout, with advanced carbonfibre technologies used for body components. Specific weight-saving components include titanium exhaust system (saving 40% over steel equivalent), Formula 1-grade transmission materials and thinner glass.

2021 McLaren 765LT Spider

Up to 22 kgs has been saved in the development of the LT’s bespoke Ultra-Lightweight forged alloy wheels. These are fitted with Pirelli P Zero Trofeo R tyres specially developed for the 765LT. Titanium wheel bolts are also standard fit.

In addition to all this, a significant proportion of the 80-kg weight-saving over the 720S is achieved inside the cockpit. The carbonfibre-shelled racing seats fitted as standard are together 18 kgs lighter than the 720S sports seats.

2021 McLaren 765LT Spider

The cockpit’s central tunnel is made of carbonfibre just 0.8 mm thick; the door pockets are replaced by nets; and carbonfibre has been used for such micro-details as the window switch surrounds, steering wheel clasp and Active Dynamics Panel surround. Further weight is saved by deleting the floor carpet (saving 2.4 kgs), air-conditioning system (1 0kgs) and audio system (1.5 kgs) – although the latter two can requested by customers at no extra charge.

The Spider version of the carbonfibre MonoCage II – designated MonoCage II-S – was developed alongside the coupe monocoque and shares most of its structural elements, including the windscreen surround. Such is the strength and stiffness of the structure that no additional bracing is required over the coupe – another weight-optimising factor. At the rear of the car, carbonfibre structural supports are fully bonded into the chassis to provide roll-over protection.

2021 McLaren 765LT Spider

The electrically operated, one-piece carbonfibre Retractable Hard Top (RHT) goes from closed to open within 11 seconds (among the world’s quickest) and can operate at speeds of up to 50 km/h. The convertible roof design plays an integral role in the structure, featuring a carbonfibre frame within the RHT panel and creating a full carbonfibre shell when closed.

The roof mechanism, powered by 8 motors, is also among the world’s quietest. Occupants will experience a sound no louder than 50 dBA during operation, with a peak of 60 dBA during the latching process – twice as quiet as the roof of the 675LT Spider, the first convertible LT supercar.

The rear window, which can be lowered even when the roof is up to intensify the quadrophonic exhaust note, has its own motor, as does the RHT latching mechanism. All these motors are optimised to work in parallel, allowing the roof to begin to move before the tonneau has completely opened, which saves time

2021 McLaren 765LT Spider

There are also additional comfort benefits for occupants: because it is a single-piece panel with no central seal, headroom is improved, while the extended length of the roof panel allows the tops of the A-pillars to be further forward, enhancing the sense of space and easing ingress and egress.

Like every LT, the new Spider is designed to excel on track; the ability to remove the roof makes it an even more immersive and compelling car to drive on the road. There is the same highly evolved aerodynamic package as the coupe but the active rear wing calibration is revised to reflect whether the roof is up or down. A recalibration of the dampers has also been necessary to account for the minor increase in weight. As a result, the Spider matches the coupe’s aero performance in every respect, with class-leading downforce 25% greater than that of a 720S Spider.

765 ps from the 4-litre twin-turbocharged V8 engine makes this the brand’s most powerful convertible, and it has a best-in-class power-to-weight ratio of 598 ps-per-tonne at lightest dry weight – with 800 Nm of torque. The transmission gear ratios have been revised and makes in-gear acceleration 15% quicker than a 720S Spider.

2021 McLaren 765LT Spider

720S with Gulf racing colours recreated by McLaren Special Operations

Until this century began, motorsports were viewed mostly at ground level, with spectators able to see cars zooming by on a rally stage or a closed circuit. Major events had aerial coverage which required using a helicopter which wasn’t cheap. In-car footage had been available earlier though but usually available only after the event.

Today, spectators and viewers around the world can watch an event from overhead as drones have made it easier and cheaper to capture imagery from above. Even ordinary drones can provide a view that is exciting and give a broader perspective.

As good as watching from a helicopter
One example of drones being used for motorsports is in the unique Extreme E series for all-electric off-road SUVs. The series has so far gone to the Saudi Arabian desert and the long beaches of Senegal, with the next venue to be Greenland. And at each of the first two rounds, viewers have been able to follow the vehicles as they raced over the rough terrain and able to watch exciting overtaking manoeuvres from overhead. It’s as good as having a helicopter of your own to watch!

The company that is covering the Extreme E rounds is Aerios Solutions which not only captures the footage but also broadcasts it live to a worldwide audience. The drones, which are ‘must-have’ for entertainment and audience wow factor, offer a degree of dynamic perspective that no helicopter or plane could possibly achieve. They are event environmentally friendly in that they don’t need fossil fuel to operate, unlike helicopters. Drones run on electricity and their batteries are recharged on-site using Extreme E’s hydrogen fuel cell generators.

Highly skilled drone pilots
Aerios Solutions, a leader in drone filming technology – has 3 champion stunt helicopter pilots on its team. “It’s safe to say we have a pretty experienced crew at Aerios Solutions!” said its Director Martin Taylor. “Two of our crew are actually world champion helicopter stunt pilots, and all of our pilots have extensive experience in the drone industry including working in major film productions.”

The skills of these pilots are required to control the drones that capture the ODYSSEY 21 SUVs in what is likened to ‘Star Wars meets Dakar Rally’ style racing. “As a race series, Extreme E represents so many world firsts. Live sports programming with this level of remote production has not been done in these parts of the world before. In Greenland, we’ll be in a valley with a glacier on the side; in Senegal, we were on a beach next to a lake; and in Saudi, we were literally in the middle of a vast desert canyons. Getting live pictures out of these places with the level of integration we’ve got, just hasn’t been done before,” Extreme E’s Chief Marketing Officer, Ali Russell, proudly explained.

Aerios Solutions came on board as it was well known to Extreme E’s film production company, Aurora Media, in the past. They were an ideal outfit to get the coverage and nobody else is doing anything close – in extreme environments, with augmented reality and really dynamic coverage.

The drones can capture views like these, giving the audience a more exciting perspective of close duels – and the broadcasts are delivered live worldwide.

Operating in remote locations
There is no doubt that it is insanely tricky flying and shooting in Extreme E’s remote locations. However, even before that starts, the logistics are among the main challenges. “Getting a whole live broadcast to such remote areas is a huge challenge. There is absolutely no infrastructure on site before Extreme E arrives there. Every piece of equipment has to be transported to the operating site. Thinking ahead and planning are essential to making the operation a success,” said Taylor.

“Transport around site is difficult, and we normally need 4-wheel drive vehicles just to get to the operating positions. The remote locations have given us some unique challenges, from the baking sun and steep canyons of Saudi Arabia, to even being chased by vultures in Senegal!” he revealed.

“In terms of equipment on-site, we have three main large drones for live broadcast, along with numerous small FPV (First Person View) drones. these are extremely small, extremely quick, lightweight and agile racing drones which we use  for recording fast dynamic, close shots,” Taylor said.

The three actual broadcast drones, made by a company in the Netherlands, are highly modified versions of the Acecore Technologies Neo and Zoe drones. They are large, stable platforms able that carry not only the camera and gimbals, but also the complex broadcast equipment and they can fly in all weather conditions which is pretty important in this championship.

Working together from 3 countries
In total, there are 6 pilots on site, operating three drones simultaneously. There is an engineer on call in the UK, along with Taylor in the broadcast suite in London. To carry out live broadcasting to millions of screens around the world,  the footage is transmitted from the drones to receivers on-site. From there, the signal is transmitted to the director and producer in the broadcast compound and then, via satellite, to the broadcast suite in London. Finally, the signal is transmitted to a technical team in the Netherlands. After all this, the signal travels back to the on-site broadcast team, before finally being transmitted worldwide via satellite.

Even if you consider yourself a fairly competent pilot of a DJI drone, the drones used by Aerios Solutions are extremely complicated to operate. A minimum of two pilots is needed to operate each drone – one pilot controls the drone itself, the other the camera/gimbal.

“The main skills required are a high level of piloting skill. The pilots need to be extremely skilled and experienced in actually flying the drone and, of course, technical skill meaning they need to be able to maintain the drones in the remote areas. Also, team working skills – the pilot and gimbal/camera operator work as a team to get the live broadcast shots. Normally, the gimbal/camera operator directs the pilot, but they work together ‘as one’,” said Taylor.

He added that communication skills are also important. Not just communicating with each other as they chase the vehicles around the course but also with the production team. They are directed from the on-site producer, the on-site director and the production team in London.

Click here for other Extreme E news and articles.

StayAtHome

Earlier this year, coachbuilder Huber announced a Lamborghini Aventador facelift, and the first unit has been delivered to a customer in the United Kingdom. The customer is the membership Secretary of the Lamborghini Club UK, Ciro Ciampi who also founded the car community known as ‘Petrolheadonism’.

Ciampi received his latest toy on the lawn of the former residence of David and Victoria Beckham. The property is currently home to one of Britain’s most private car collections, creating a spectacular setting for the handover. The scene was not only complemented by the car collection  but also by the attendance of Italian supercar patron, Fabio Lamborghini. He was impressed by the Era and happy to give his approval by being the first to unveil the car to the world.

Designing for the aftermarket
Led by Sean-Peter Huber, the UAE-based brand is on a mission to build a new community of collectors and car enthusiasts who value going back to the drawing board. His passion for car design has put them in uncharted territory in the aftermarket, but the first steps are already telling of what an exciting future the brand holds.

Entitled ‘Era’ to mark 10 years of the Aventador and to pay homage to the end of its production, Huber’s Era has created a new take on one of the worlds most revered supercars. The team focused on creating new body panels that respect the familiar DNA, exchanging the front and rear bumpers with an entirely new design in carbonfibre and an optional carbonfibre boot. Huber said: “The Era should remind us of how much we all admired the Aventador when it was launched in 2011”.

Limited to 21 sets
The fully-funded project is independent of Lamborghini with the first batch of bumper units already taken up by selected collectors who have been supporting Huber’s vision from the start. The Era price starts at 30,000 euros (about RM150,000) and will be limited to 21 pieces in the current edition.

According to Raj Singh, founder of Supercar Service Ltd (Huber’s UK distributor), in their 11-year history, they have not found an aftermarket design that integrates so well with the LP-700-4 chassis. As an option to customers around the world and to assure quality control, Huber has designated Supercar Service as ‘flying service’ partner, sending personnel to customer locations to assemble the Era.

Production of Lamborghini Aventador ends with LP 780-4 Ultimae

StayAtHome

Even after you recover from COVID-19 infection, your quality of life may be affected and you can suffer for a long period after that. So do your best to avoid being infected by taking the necessary measures to protect yourself as well as others – and get vaccinated.

Getting as much of the population vaccinated to help reduce the severity of COVID-19 infection is a priority. The effort is being carried out by the government as well as the private sector, which is providing areas to set up vaccination centres. One such company is PLUS Malaysia Berhad which has established an Integrated Public Vaccination Centre (PPV).

The IPVC has been set up in partnership with its medical advisory partner, Primer Cherang, together with Protech Health, the implementer of private medical practitioner and healthcare NGO participation in the National COVID-19 Immunisation Programme (PICK). The IPVC is at the PLUS HQ  situated near the Subang exit off the New Klang Valley Expressway (NKVE) in Selangor. The facility can inoculate up to 2,000 persons per day.

PLUS Integrated Public Vaccination Centre (IPVC)

One of 14 public immunisation venues

The COVID-19 Immunization Task Force (CITF) has selected the PLUS HQ as one of the 14 public immunisation venues to accelerate the dispensing of vaccines through Operation Surge Capacity. This will ensure that all adults will receive at least one dose of the vaccine by August 1 and help flatten the infection curve.

“As of Sunday, July 25, PICK has reported that over 16 million doses comprising first and second doses have been administered, of which11.5 million of our population has received their first dose and over 5.4 million are fully vaccinated with two doses. Based on this data, PLUS is proud to be able to play its part in helping the country to ramp up its immunisation numbers. The sooner we are able to attain the target to allow us to enter Phase 4 of the National Recovery Plan, the sooner the economy can improve, and businesses can revive,” said Datuk Azman Ismail, Managing Director of PLUS.

PLUS Integrated Public Vaccination Centre (IPVC)

“I urge you to regularly check your MySejahtera updates and who knows, you may be visiting our Persada PLUS HQ soon. In the meantime, continue to adhere to SOPS if you must be out and about;  if not, it would be best to work from home where possible until you are fully inoculated. Hopefully by then, as the government has indicated, you may get to travel on our highways again,” he added.

The participation also provides the opportunity for the employees of PLUS to be part of something meaningful and historical. Warga PLUS will join as volunteers and assist the 150 health personnel from Primer Cherang and Protect Health.

PLUS Integrated Public Vaccination Centre (IPVC)

PLUS customers now have PUTRI to help them with their enquiries

The National Vaccination Program in Malaysia is free of charge.

StayAtHome

Archive

Follow us on Facebook

Follow us on YouTube