Piston.my

safety

Visit www.bhpetrol.com.my for more information.

‘Mobility’ is a word that automakers like to use today, some explaining that they are transforming themselves from just being vehicle manufacturers to ‘mobility companies’. Honda too sees itself as a mobility company and indeed, over the 73 years it has been in business, it has developed products that provide mobility for the masses. In fact, it’s the world’s largest power unit manufacturer, making products from power generators used at pasar malams to motorized transport and even jet aircraft.

Honda would like to be regarded as a company that society wants to exist, because of the good things it does and can do. And as a responsible corporate citizen, it also has to consider important global issues concerning the environment and road safety, the latter related to the vehicles it provides.

With reduction of carbon emissions as a priority, Honda has made a firm commitment to achieve carbon neutrality for all its products and corporate activities by 2050. In this way, its business will have zero environmental impact and this will require the use of clean energy and resource recirculation.

In order to achieve this carbon-free goal on a ‘tank-to-wheel’ basis, Honda has decided that by 2040 – just 19 years from now – it will sell only battery-electric vehicles (BEVs) and fuel cell electric vehicles (FCVs). It will no longer sell vehicle with internal combustion engines (ICE) that generate pollution, even if much has been done in past decades to bring pollution from exhaust emissions down (Honda’s CVCC system being one of the ways).

Of course, between now and 2040, the phasing out of ICE vehicles has to be progressive and will start with the more advanced markets where there is already a trend of electrification. In fact, Norway has already reported that sales of fully electric vehicles have overtaken ICE vehicles in that country. The ratio of electrified vehicles will be 40% by 2030 and then doubled to 80% by 2035.

The company has identified North America as one of the regions where it will pursue the targets and has formed an alliance with GM to achieve electrification in North America efficiently. The two companies are jointly developing two large EV models using GM’s Ultium batteries which will enter the market in 2024 under both the Honda and Acura brands.

Starting from the second half of the 2020s, Honda will launch a series of new EV models which adopt e:Architecture, a completely new EV platform developed by the company. These EV models will first be introduced to the North American market, and then to other regions of the world.

China, the world’s largest automobile market, will also see a similar progression to EVs and during the next 5 years, at least 10 Honda-brand models will be introduced. In fact, the first of these will be the SUV e:prototype which is scheduled to go on sale in early 2022.

SUV e:prototype, unveiled in Shanghai this week, will go on sale in 2022 as the symbolic first Honda-brand EV in China.

Japan, Honda’s home market, will see a sales ratio of 20% EVs by 2030, 80% by 2035 and 100% by 2040. However, if including hybrid models, 100% of automobile sales in Japan can be electrified by 2030. There will also be a K-car EV in 2024 as well.

It will be interesting to see how Honda deals with markets which do not have firm policies concerning EVs. Obviously the company won’t want to stop selling altogether but conditions could be difficult if prices of EVs do not come down sufficiently for the masses to afford. Right now, in countries like Malaysia, the fact that EVs have to be imported in CBU form makes them very expensive and low numbers will not be encouraging for companies, even less so to consider local assembly that could help offset the high production costs. Even then, a poor recharging infrastructure will be a discouraging factor to consumers and this would need government support to establish comprehensively and extensively.

Cruise Origin self-driving vehicle.

In the area of mobility services (MaaS), Honda will introduce the Cruise Origin, an electric self-driving vehicle. The company is currently developing jointly the vehicle with GM and Cruise, for the Japanese MaaS market in the mid-2020s.  On a broader scale, Honda will continue to work on the concept of Honda eMaaS (mobility services) by connecting electrified mobility products and energy service. Honda eMaaS will have three core areas: Expansion of the utilization of Mobile Power Packs; utilization of large-capacity batteries for electrified vehicles; and application and implementation of fuel cell systems.

Regarding fuel cell systems, hydrogen is expected to be popularized as a renewable energy source and Honda has a long history of R&D in hydrogen fuel cell vehicles (FCVs). It was one of the first carmakers to produce a FCV which was successfully used on a commercial basis and its collaboration with GM will see reduced costs and expansion of its line-up of FCVs and also using FC systems for a wide range of applications.

Honda has many years of experience in developing fuel cell vehicles (FCVs). In 2008, it introduced the FCX Clarity which had a hydrogen fuel cell to generate electrical power.

Honda will strive for zero traffic collision fatalities involving Honda motorcycles and automobiles globally by 2050. The major challenge we will face as we work toward this goal is how to eliminate motorcycle collision fatalities, especially in emerging countries. As a company that has both motorcycle and automobile businesses, we will continue to strengthen our research on safety technologies that enable motorcycles and automobiles to safely coexist and lead the way in realizing a collision-free society from the standpoint of both hardware and software.

As for road safety and the 2050 objective of zero traffic collision fatalities involving motorcycles and cars, Honda will apply omnidirectional ADAS (advanced driver-assistance system) to all new automobile models on sales in developed countries by 2030. However, the high accident rates occur in less developed or emerging markets where there are very high numbers of motorcycles. In such areas, particularly in emerging markets, there are many collisions that can be prevented through traffic safety education activities and by approaching the issue from the perspective of infrastructure and government policies. Therefore, Honda will focus also on such areas including strengthening of educational programs and government/industry relations activities.

Future Honda models will have sensors that can scan all round the vehicle to reduce collisions with other road-users, especially motorcyclists.

In order for Honda to keep making progress in its environmental and safety initiatives, it will be necessary for the company to invest in the R&D. This investment will not be influenced by fluctuations in sales revenues and Honda declares that it will invest a total of approximately 5 trillion yen as R&D expenses over the next 6 years.

Honda has been actively developing EV models since the 1990s, some of which have gone on sale in selected markets. By 2040, its range will consist entirely of EVs.

“As of last fiscal year, we enabled Honda R&D to focus on the research of advanced technologies, and we are conducting research on leading-edge environmental and safety technologies for the realization of a society that aims for zero environmental impact and a collision-free society. Also, we are making progress with research on technologies which will expand mobility into the 3rd and 4th dimensions, into the skies, the ocean, outer space and the area of robotics. We will strengthen our original research of technologies by ensuring optimal allocation of resources into the area of advanced and cutting-edge technologies,” said Toshihiro Mibe, Honda Motor’s new President and Representative Director who took over the position from Takahiro Hachigo at the beginning of this month.

“My hope is to hear people saying, ‘We are glad Honda exists’ or ‘Honda will definitely do it’. Honda wants to continue to be a company that people want to exist. That is what we want to achieve,” Mr. Mibe said during his inaugural speech as new President.

Older drivers will remember the days when they had to use their own arms to signal when they were turning left or right. In case you don’t know, to indicate turning left, you moved your arm in a circle (outside the window of course). Thankfully, signal lights were invented and could be activated from the steering column by moving a stalk up or down.

Records at the US Patent Office show that in 1933, one Joseph Bell applied for, and was granted a patent, for his invention of what would be the earliest electrically-operated signal lights for motor vehicles. In his description, he said: “The principal object of my invention is to provide a signalling device which is readily visible and will clearly indicate to all nearby persons an intended change of direction or a stop or both simultaneously.” The patent expired permanently in July 1955.

While not an inventor, silent-film star Florence Lawrence is also credited with having designed the first signaling arm for cars, like the one many remember on the Morris Minor.

Electrically-operated signal lights have been on cars for many decades, especially American ones as they were invented and patented in the 1930s. The extending arm for signalling on the Morris Minor is often remembered but generally, signal lights were separate units on the bodywork or integrated with the other lights as a single unit.

Unchanged feature for decades
Carmakers naturally adopted the signal light as soon as they could and it remained unchanged for many decades, relying on bulbs to flash and a clicking sound which the driver could hear to be aware they were in operation. Authorities in various countries made signal lights compulsory and also specified certain dimensions which were generally similar globally, making it easier for the manufacturers when they designed their cars.

Initially, the signal lights were installed separately with their own housings. As designers came to create integrated lighting units, the signal lights were incorporated in the same housing in some cases, making for a neater appearance and also easier wiring. In some cases, the bulbs were coloured, or the reflector was coloured with the universal orange/amber colour.

LEDs provide more design flexibility
In the late 1990s, light-emitting diode (LED) technology was gradually adopted for signal lights and brake lights, allowing designers more flexibility in how they styled these elements. They still had to be mindful of regulations but were able to be creative at the same time. The use of LEDS had many benefits – longer service life, less failures due to vibrations and less energy use. LEDs could also light up almost instantly, unlike bulbs, and that helped in road safety, especially for brake lights.

Some European manufacturers advanced signal light design with the dynamic indicator. This consists of several light segments that progressively light up from the centre towards the outside, pointing in the direction of turning. They are eye-catching and were initially associated with more expensive models. They are slowly moving downwards in the market and in time, they should also be available in lower-priced cars as a standard feature.

With the need to stick an arm out of the window being unnecessary, one would think that drivers would readily use the signal lights. However, a study by Abertis Global Observatory on road safety in several countries found that, on average, 44% of drivers don’t use them when overtaking or making lane changes. There would also be other road-users who do not pay attention to signals and collide with vehicles as they turn.

Many of today’s cars have a Blind Spot Monitor which alerts the driver of another vehicle in the blind zone if they want to make a turn or change lanes. An even better approach is Honda’s camera-based Lane Watch system (below) which serves the same purpose.

Proper use of turn indicators
Driving safety experts advise that before making a turn or lane-change, the driver needs to look in all the mirrors first. Just because you activate the signals does not mean you have the right of way and you need to ensure that other road-users are not endangered or inconvenienced. This is where the Blind Spot Monitor that more and more cars are having will come in useful, as it can alert the driver of another vehicle that may not be visible.

It is also a good idea to activate the signals well in advance of making the manoeuvre so others can either reposition themselves as they anticipate your vehicle slowing down, or slow down if you are about to move into the lane in front of them. Of course, in lane-change manoeuvres, the time between a decision to do so and executing the action may be very short so in this case, checking the mirrors is more important.

In earlier years, motorists stuck their arms out to signal turns and the action to turn left was to move the arm in a circle. Today, they just press a stalk by the side of the steering column up or down (below)

In many vehicles, there is a lane-change mode on the signal stalk where a gentle partial press will activate the signals for a few seconds. This is to alert others just long enough and the signal lights will go off by themselves. They will not remain on for long as when you push the stalk up or down.

It is also recommended to use the signal lights when leaving a roundabout. The more aware other drivers are of your intentions, the less likely an accident will occur. You should also use the signal lights to let others know that you are waiting for someone to come out of a parking bay if you happen to be stopped in a carpark. Your brake lights might not be one so a vehicle approaching may not know you are fully stopped and waiting; seeing the signal lights will at least let the driver know of your intentions.

How the new Nissan Almera Turbo is contributing to road safety

BHPetrol RON95 Euro4M

No matter how many crash tests are done and how many thousands of hours of simulations are done on computers, motor vehicle accidents can still be unique due to many variable factors. While the engineers may design the vehicle to cope with various accident conditions and protect the occupants, but there will be times when a situation is so unique that the effects are severe.

This is where Volvo’s in-house ‘detectives’ come in; officially known as the Volvo Car Accident Research Team, they investigate actual accidents to obtain information and data so that Volvo can improve the safety of its cars.

Full-time work on investigations
While some other carmakers may have similar investigators or take an interest in some accident cases, Volvo Cars has had its team for the past 50 years as a full-time department, and all round the clock too.

“The Accident Research Team’s hard work and research allows Volvo Cars to make sure that a tragic traffic accident can lead to something good: ever safer cars,” said Malin Ekholm, Head of the Volvo Cars Safety Centre. “By closely analysing what has happened during each phase of an accident, the team provides crucial information on what can be improved on our cars.”

The team has been in operation since 1970 and whenever an accident involving a Volvo car occurs around Gothenburg, Volvo’s home city in Sweden, they quickly get to the scene when notified. As soon as they arrive, they start an investigation and document the sequence of events in as much detail as possible.

Understanding an accident
That means asking questions like how forceful the impact was; how quickly did the active safety systems intervene; how were the passengers; and so on. Other questions may determine weather conditions and  even the condition of the road markings and signs. The team requests publicly accessible police reports, contacts the driver and examines the car when possible.

The data is brought back to the office where work continues. The team also tries to understand how the driver experienced the accident, a process that involves the Volvo Cars Safety Centre’s behavioural scientists.

Volvo Cars Safety Centre

Finally, the team will ask the people involved in the accident to share their medical records, which allows them to take note of any injuries sustained. These are analysed by biomechanics experts, in cooperation with physicists, to understand the exact causes of the injury.

Data is analysed and shared
All the data and knowledge collected is coded and ‘depersonalised’, becoming objective information for analysis and future reference. Conclusions from this research are shared with Volvo’s product development teams, who use it to develop and implement new technologies in upcoming cars. The team also identifies things that can’t be solved today, but can be addressed as new technology develops.

Every year, the team investigates around 30-50 accidents in person, but accidents happen all over the world and the scene can be hard to reach. In those cases, and to the degree possible, the detectives work to map out accidents with the support of Volvo personnel and emergency services closer to the site.

“The Accident Research Team is far from the only source of research data for our safety experts, but it plays an important role for us to really understand the details,” adds Malin Ekholm. “Accidents do still happen, but nowadays the consequences are much milder and serious injuries are much rarer than they used to be.”

Soon, you will be able to go only up to 180 km/h in any Volvo

BHPetrol

Since the early 1980s when airbags started to be installed in cabin, millions of people have benefitted from the extra protection and experienced reduced injuries during accidents. The contribution of airbags to saving lives cannot be understated and as new technology has been developed, the effectiveness of airbags has increased.

Preventing head injuries
Now the Hyundai Motor Group (HMG) has developed a new centre side airbag, further enhancing the safety of its vehicles’ occupants. This airbag works to separate the space between driver and front passenger by expanding into the space between the front seats to prevent head injuries of the two occupants.

Hyundai Motor Group

If there is no one in the front passenger seat, the airbag will protect the driver from the effects of a side collision coming from the opposite side. The centre side airbag is installed inside the driver’s seat and will deploy once the impact is sensed.

The new centre side airbag is expected to diminish head injuries caused by passengers colliding with each other by 80%. According to the European Automobile Manufacturers’ Association’s statistics, the rate of secondary damage caused by these kinds of collisions or from hitting interior materials is about 45%.

Hyundai Motor Group

Lighter and simpler
The airbag has an internal component called a tether which allows the airbag to maintain its form and withstand the passenger’s weight. HMG has developed a new technology to simplify the design and reduce the weight of components to produce an airbag which is about 500 gms lighter than the competing products. Thanks to the smaller size of the airbag, the design teams will have more flexibility in the type of seat design they envision for future products.

HMG has applied newly patented technology to maintain reliability but reduce the weight and size of the airbag which will be offered in selected models to be introduced in future. Upcoming Euro NCAP assessments are expected to include side impact into its consideration beginning from 2020 and HMG’s airbag is expected to work favourably in such evaluation.

PISTON.MY

Although the first regulation regarding mandatory fitment of airbags was introduced in the USA in the mid-1970s (but never actually adopted), it was only in 1980 that the world’s first airbag system was installed in a production model – the Mercedes-Benz S-Class. Since that time, airbags have undergone technological advancements to increase levels of protection for the front passengers.

Initially, the focus was in frontal collisions and much development was on the two airbags at the front. Then airbags were added to the sides, either at the seats, in the doors or deploying like curtains over the window openings.

The importance of providing protection at the sides cannot be understated. Studies in Germany show that side impact collisions are among the most dangerous type of road traffic accidents, accounting for nearly 700 deaths per year and nearly a third of all occupant fatalities.

Side airbag installed externally
To enhance the existing side airbag systems installed in many cars, ZF has developed a new pre-crash safety system (still in prototype stage) which uses an external side airbag deployed milliseconds before a collision. It provides an additional lateral crumple zone, which can help save lives and reduce occupant injury severity by up to 40%.

To make this possible, ZF has networked the airbags to the vehicle’s sensor systems and developed algorithms that are capable of determining if a crash is imminent and decide whether or not to deploy the airbag.

ZF is currently the only company to provide the full spectrum of integrated vehicle safety technology – from sensor systems, algorithms, and control units to active and passive actuators. “Our deep understanding of the entire ’see. think. act.’ process enables us to conceptualize and realize integrated vehicle safety solutions such as the new pre-crash safety system,” explained Uwe Class, Head of the Safe Mobility Systems department within ZF’s Advanced Engineering team.

Recognition to deployment – in the blink of an eye
The biggest challenge in the development of this system was reliably recognizing an unavoidable collision and deploying the external side airbag before the collision takes place. The system has approximately 150 milliseconds to make the decision to deploy the airbag and fill it – roughly the amount of time it takes a person to blink.

The vehicle’s sensors first have to identify a potential impact quickly and accurately. This is possible with connected cameras, radar and lidar. Algorithms within the system software decide whether or not a collision is unavoidable and the deployment of the airbag is both possible and beneficial. If these decisions are all affirmative, the system ignites the inflators to fill the airbag.

The airbag, which has a capacity of between 280 and 400 litres (5 to 8 times the volume of a driver airbag) depending on the vehicle, then expands upwards from the side sill to form an additional crumple zone in the door area between the A and C pillars.

In a side impact collision, the occupants on the side of the impact are at particular risk of serious injuries in the chest area if the passenger cabin is severely deformed. The ZF pre-crash safety system can reduce the penetration of the intruding vehicle by up to 30%, helping to significantly reduce the occupants’ risk of injury.

Wow. I’m not sure if I’m angry or just very, very disappointed in The Star Online, for this utter drivel. Honestly, I expected a LOT more from one of the more respected media houses in the country. While I’m quite sure the writer of this article published today (screenshot below) is not a biker…

…what’s even more ridiculous is that the writer didn’t even bother to do a little bit of research before writing this nonsensical rant of an article, (some rempit probably pissed him off today) because if he had done so, he’d realise that as of today, September 15th 2018, the Federal Highway bike lanes are still officially CLOSED. Check out this video which I just went out to shoot if you need visual proof… Location: Motorola heading to KL.

And as you can clearly see from this photo below as well, the entrances to the bike lanes along the Federal Highway are closed in many places, necessitating the need for bikes to use the main highway. As I said in the video, I don’t want to use the main part of the highway, none of us do, it’s horrendously jammed most of the time, and a lot more dangerous for bikers to use than a dedicated bike lane.

The bike lanes on both sides of the Federal Highway were supposed to be opened for use in March this year by the way, but they’re still closed..

Would you like to see the most laughable aspect of this bullshit article? Check out the main photo that was used in it below… You can clearly see the entrance to the bike lane is closed even in their own picture, and the arrow is directing bikes to use the main highway! Shoot yourself in the foot much Star Online? What rubbish. – Chris Wee.

Photo from The Star Online

(What preceded were the express personal views of the Editor and may not be that of Piston.my as a whole)

 

 

Ducati fans, and all bike enthusiasts for that matter, do take note! There’s now a one-stop Ducati Centre & Motor Specialist on the island of Penang for you to visit! During the Petron Blaze RON100 Media Ride recently, we dropped by Sheng Fatt Motor Specialist Centre, located at 24, Jalan Dato Keramat,
10150 George Town, Penang, Malaysia.

With ample parking up-front, the ground floor is reserved for a bike showroom housing the latest Ducati motorbikes, but it’s the level above that blew us away.

The entire floor has been renovated to a bike apparel showcase, replete with quality used bikes for sale too; like this Honda Africa Twin and Suzuki GSX-1000 for example…

It’s a very laid-back area with refreshments and even a coffee bar, as well as places to sit and relax, do work, while watching your bikes being worked on in the workshop above, via flat-screen TVs. Yes, unlike other bike shops, this one has its workshop and 6 crew above!

Renovated at a cost of more than RM1 million, it’s owned and operated by Kheoh Hock Seng @ Ah Seng, (above) and his crew of 4 trained mechanics and 2 service-advisors, as well as 3 showroom front-liners.

The new centre has a tonne of riding apparel from helmets to gloves, as well as jackets and boots, from known bike-apparel makers such as Alpinestars, as well as official merchandise from Ducati, Moto Guzzi, Aprilia & Vespa.

Ah Seng’s reasoning behind this extensive renovation to include a huge selection of riding apparel, is because he believes (from being a biker himself) that the importance of safety when it comes to riding gear is still a bit lacking in Penang. Here’s a video of how the shop looks upstairs…

https://www.facebook.com/Shengfattmotor/videos/1703040073090889/

With the hopes of educating the biking community on the importance of being safely kitted-out when riding, the new premises is already open for business, so if you’re in the area, do drop by, or call 04-227 8932 for more details.

Alternatively, you can check out their official Facebook page for more photos, loaction and directions.

Photo Gallery…

MG’s compact SUV, the MG ZS has been awarded a 3-star safety rating by Euro NCAP, an independent body that classifies vehicle safety based on various frontal and side impact tests. A maximum of 5-stars can be awarded to a vehicle if it copes well with frontal and side impacts as well as offers exceptional level of protection to occupants.

A 3-star rating achieved by the MG ZS, may not be exemplary, but means that the vehicle will provide a satisfactory level of protection during a collision. That said, in both the side barrier test and the more severe side pole impact, the MG ZS scored maximum points. The passenger compartment remained intact, and provided decent protection for driver and passengers.

Harvey France, spokesperson at MG, said, “An achievement of a three-star rating from Euro NCAP is a great result. The body of the car showed great strength in all aspects and the MG ZS scored maximum points in the side barrier and the more severe side pole impact tests, a true testament to the work carried out by the engineering team.”

Built at MG’s facility in Longbridge, Birmingham, the MG ZS is a popular vehicle in the UK as it comes with a relatively affordable price tag, decent looks and a slew of options. This include six way adjustable seating and a touchscreen infotainment system that provides Bluetooth connectivity and support for Apple Carplay.

The Lincoln Navigator has been given some pretty interesting tech that will help curb distracted driving as well as make vehicular information more presentable. It has been fitted with advanced head-up-display (HUD) technology that is fully customisable. This is the same digital light processing that is used in movie theaters.

Ford says that the display remains clearly visible on the windshield despite being hit with direct sun light or, when viewed through polarized sunglasses. The system consists of a tiny chip that contains 400,000 sturdy mirrors, each with a pixel refresh rate of up to 5,000 hertz operating in synchronized movement to control the system’s optics.

The picture is then projected in full colour, upwards, providing an illusion that it’s float just above the vehicle’s hood. The emphasis, of a system such as this is, reducing screen clutter and focusing on the timing and size of the information. The chosen info is projected as and when needed. And as its importance increases, its displayed more prominently.

“A typical head-up display duplicates information displayed on the cluster,” said Anthony King, development lead on Lincoln’s all-new head-up display. “But this display makes for a unique and easy-to-use experience for our clients.”

He later added, “This eminently visible head-up display and the instrument cluster serve to complement each other to ensure Lincoln clients look forward to every time behind the wheel.”

Current speed and stipulated speed limits remain visible at all times, but other information, change when the driver receive a call or when a navigation prompt is needed. Due to its relative importance, this information is displayed clearly and brightly with greater prominence.

HUD technology isn’t new, several upmarket cars have utilized it for years to keep drivers’ eyes on the road at all times. But Lincoln’s approach, is just a little bit smarter, its system does the thinking for the driver, negating the need for him/her to faff about with the display settings.

National carmaker Proton gears itself up for upcoming Chinese New Year festivities with special safety campaign. (more…)

Archive

Follow us on Facebook

Follow us on YouTube