Piston.my

Latest News

Toyota Motor Corporations has announced the “LQ”, a concept vehicle that has the advanced ability to build an ‘emotional bond’ between car and driver. That’s right, the next-generation Toyota “Concept-I” comes ready with automated driving capabilities and “Yui”, Toyota’s next-level AI that can learn from the driver and deliver a personalised mobility experience. (more…)

Edaran Tan Chong Motor Sdn Bhd (ETCM) has unveiled their latest Nissan Retail Concept (NRC) to further improve the overall Nissan customer experience in line with their ever-evolving global presence. The first Nissan showroom to adopt this new retail concept is Nikaijaya Resource (KL) Sdn Bhd. (more…)

BHPetrol

The finishing positions of the 2019 Japanese Grand Prix yesterday were taken on the 52nd lap rather than the 53rd lap. This means that the race distance was one lap short and the error is believed to be due to the chequered flag having been shown on the display panel one lap early.

Teams and drivers, upon seeing the chequered flag flash, assumed the race to be over as the regulations state. The FIA’s Article 43.2 says: “Should for any reason the end‐of‐race signal be given before the leading car completes the scheduled number of laps, or the prescribed time has been completed, the race will be deemed to have finished when the leading car last crossed the line before the signal was given.”

2019 Japanese GP

The officials don’t know how it occurred and blame it on a system fault. However, even with one lap short, the overall results are unchanged – with one exception. Although SportPesa Racing Point’s Sergio Perez (pictured below) had crashed out in what was to have been the final lap, the error instead positioned him as ninth-placed finisher. This meant he picked 2 valuable points for the team which is still going after Scuderia Toro Rosso Honda. Meanwhile, Nico Hulkenberg, having been pushed down one position to tenth place, lost a point.

Racing Point

Heavy penalties for Leclerc and Ferrari
Ferrari’s Charles Leclerc was also penalized for his collision with Max Verstappen on the first lap, resulting in the Red Bull Racing driver having to retire. The Stewards imposed a 5-second time penalty which was added to the elapsed race time.

Additionally, he got another 10-second penalty for continuing to drive the car in an unsafe condition after the incident on Lap 1. He drove until the third lap and then the damaged wing disintegrated and some broken parts caused damage to the mirror on Lewis Hamilton’s car.

Charles Leclerc

This all means Leclerc’s finishing position is one step down, from sixth to seventh. He received 2 penalty points on his racing licence (total of 2 in the 12-month period), while the Ferrari team was fined 25,000 euros (about RM115,254).

PISTON.MY

 

BHPetrol

Hyundai Motors is currently pushing their technology prowess on autonomous driving capabilities with their Hyundai IONIQ model. Still in early stages, the hybrid sedan is currently being tested on European roads with Level 4 Autonomous Driving, which is only one level away from a car being completely autonomous in every situation. (more…)

BHPetrol

Japan GP

♦ The strong typhoon forced qualifying to be postponed to raceday and both Ferrari’s were able to take the front row of the starting grid.

♦ With Valtteri Bottas winning in Japan, the 2019 F1 Constructors Championship is secured by the Mercedes-AMG PETRONAS Motorsport team. The sixth consecutive world championship double is a new Formula 1 record.

♦ Although the two Ferraris had the front row on the starting grid, the team lost its advantage when the lights went green as Sebastian Vettel fumbled his start. However, the stewards did not penalise him for what appeared to be a ‘jump start’. Charles Leclerc was also slow off the line and Bottas surged forward, taking advantage of the situation.

♦ Max Verstappen’s race was short after his car was hit by Leclerc’s early in the race. Although both cars were damaged, the Red Bull was worse off and Verstappen was forced to retire.

♦ It was Alexander Albon’s first time at Suzuka and the 4th place is the best he has achieved in his career to date, one position better than in Belgium and Russia.

♦ A Mercedes-AMG driver will win the title again but it’s still not Lewis Hamilton’s for sure. The round in Mexico will be a tense one as Bottas still has an outside chance, depending on the outcome.

RESULTS

Ferrari

DRIVERS CHAMPIONSHIP 17

F1

CONSTRUCTORS

Next race in Mexico on October 27

PISTON.MY

BHPetrol

It used to be that pick-up trucks would have a model cycle of at least 10 years – double that of passenger cars. And during that considerable length of time in the market, distributors would have to sustain interest by having limited editions periodically to refresh the looks, besides adding extra features. Today, though, competition is tough and 10 years is a bit long so Isuzu Motors has come out with an all-new generation of its popular D-MAX truck after 8 years.

To go on sale from October 19, the new D-MAX has received extensive change guided by the development concept of ‘Efficient and Robust’. This development concept was formulated to offer a vehicle that delivers higher fuel efficiency and safety while responding to various usage conditions and purposes in over 100 countries where the 1-ton truck is sold.

Isuzu D-MAX Gen3

Versatility has made it very popular
The D-MAX has been especially popular in Thailand, where Isuzu has its global production hub (which supplies CKD kits to its subsidiary plant in Pekan, Malaysia, for local assembly). The popularity has been due to not only being suitable for personal use but also for business use. The durability of the powertrain has also been a strong factor in making Isuzu a top brand in Thailand.

It’s hard for a truck to look significantly different but Isuzu’s designers have given the new model a more distinctive look with a larger grille that is orientated more vertically. Aiming to present the new D-MAX as ‘Bold, Emotional and Smart’, the designers have given the chunky exterior profile with a wedge body shape a more powerful, swishing silhouette than ever before. A neatly integrated step bumper is mounted on the rear, giving an all-new, sophisticated look.

Isuzu D-MAX Gen3

In the headlamps, bi-led projectors combined with stylish signature lamps are installed giving an eager, intense look. At the rear, the lamps have dual LED edge lights. Together, these new light designs contribute to a unique, stylish appearance front and rear.

Lean, rational assembly structure and extensive use of high-tensile steel plates have moderated the overall vehicle weight but the bodywork is still tough and rigidity is 20% greater. Taking note of the need to resist corrosion as the vehicle is used in wet conditions in markets like Thailand, anti-corrosion ability is said to be greatly improved. The new D-MAX can cross a river that is 800 mm deep as well. Moreover, it’s designed in such a way that its electrical architecture flexibly accommodates evolution in security and connected technologies.

Isuzu D-MAX Gen3

 Isuzu D-MAX Gen3

Isuzu D-MAX Gen3
Front and rear suspension

Interior with ‘first-class appearance’
The revised dashboard has a 9-inch display  mounted in the centre of a horizontally-flowing form with sharp and rich surface textures. The interior has a ‘first-class appearance’ with the introduction of a floor console which is now taller and wider. Also, it is designed to enfold the driver and passenger as if they were in a cockpit of an airplane. Low-rebound MDI polyurethane is used for front seat cushions to reduce fatigue that long-distance drivers have to endure.

Isuzu D-MAX Gen3

The design of a rear seat in the crew cab is optimized to improve ride comfort. To allow for easy getting in/out, an opening of the B-pillar is shifted forward and assist grip is added.

Detailed attention is paid to its interior components having embossed and texturized surfaces to achieve a high-end, sporty look. For the workhorse applications, there’s a simple and practically designed instrument panel and durable door trim.

Isuzu D-MAX Gen3

Low fuel consumption and CO2 emissions
Isuzu has specialised in diesel engines for decades and for the new D-MAX, there’s a newly developed 4JJ3 engine (based on the reliable 3-litre 4JJ1 diesel engine). The combined effects of 250 MPa high injection pressure, electronically-controlled VSG turbocharger, heat-insulating coating on the piston, double-scissors gear, etc. has yielded the engine featuring high power, low fuel consumption and low noise. The 1.9-litre RZ4E engine (recently introduced in Malaysia) has received some enhancements.

A pull-ring shift lever is used for the manual transmission to make it easier for the driver to reverse the vehicle, and drive feel is better and more engaging. As for the automatic transmission developed for RZ4E engine, a downsized torque converter and lock-up clutch integrated with a wide-angle damper provide improvements in fuel consumption and response.

Isuzu D-MAX Gen3

A single propeller shaft made of aluminium is now installed, giving a significant weight reduction. There’s also an electromagnetic rear differential lock to use in difficult conditions. With an enhanced transfer of power to the wheels, Isuzu says it now takes shorter time to switch between 2-wheel drive and 4-wheel drive as well as between High and Low ranges.

The new D-MAX’s front hub bearing is now maintenance-free as it is part of unit bearing. Maintenance schedules for other items are extended, and the maintenance frequency and costs are greatly reduced (depending on the market).

Better protection for occupants with up to 6 airbags, and active safety systems like Blind Spot Monitoring (below).

Isuzu D-MAX Gen3

EE Architecture for new CASE era
The EE architecture is configured using the central gateway in order to pave the way to the new CASE era. Technologies designed to optimize convenience and comfort are extensively employed such as keyless entry, infotainment, lights, wipers, etc.

The new generation of the D-MAX will most likely be available in Malaysia some time next year. Because Isuzu assembles the model locally, some time is needed to prepare for assembly and also to coordinate with local parts suppliers.

Isuzu D-MAX Gen3

PISTON.MY

Archive

Follow us on Facebook

Follow us on YouTube