Home - Piston.my

EXTREME E | ROUND 2 – Ocean X Prix in Dakar, Senegal

The Rosberg X Racing team was victorious again in the second round of the Extreme E series, this time held at Lac Rose on the coastline of Dakar, Senegal. The crew of Johan Kristoffersson and Molly Taylor faced intense pressure from rival teams during the two days of the event which was known as the Ocean X Prix.

While the Desert X Prix, the first event in April, was run in dry desert conditions in Saudi Arabia, this round was along the beach fronting the Atlantic Ocean. High drama in the Grand Final saw two of the four cars retiring at the first corner, which left Rosberg X Racing to extend their championship lead and Veloce Racing to snatch a surprise result, bouncing back from their disastrous Desert X Prix.

Sandy but very different from Saudi Arabia
The Extreme E drivers loved the tight and technical Ocean X Prix course which made for close racing and had several options for alternate routes as drivers made their way over sand dunes.

“The race format here has been a big step forward from Al-Ula in terms of development for race excitement – but it’s still early stages and there’s still a way to go. One needs to analyze again, and I think we keep on seeing more and more glimpses of such awesome motor racing and this will continue to evolve into a super spectacle the more we go on. Remember, nobody’s ever done this before, and you have to be open-minded and accept that you are going to learn and make it more and more exciting each time,” said Nico Rosberg, Founder and CEO of Rosberg X Racing.

“I love this whole championship and being in the role of team principal – I’m still as competitive as hell even though I’m not actually driving. Anyway, we have the two best drivers in the car who are doing a much better job than I could – and I couldn’t be happier!” the former F1 driver added.

Races on the beach
A Shoot Out saw three top teams face off in spectacular fashion. Segi TV Chip Ganassi Racing, Andretti United Extreme E and ACCIONA | Sainz XE Team had all endured mechanical gremlins plaguing their qualifying runs.

Timmy Hansen stole the advantage into the first corner with Sara Price and Carlos Sainz in hot pursuit. The Spanish rally driver patiently waited for his opportunity and wrestled the lead away from Hansen before entering the switch zone.

At the driver swap, Laia Sanz ran into trouble failing to successfully connect her communications cable. Nonetheless, Sanz re-joined in the lead and looked to have the edge but Kyle LeDuc had other ideas. The 39-year old fired out of the switch zone in third place but quickly set about closing the gap to the top two. LeDuc showed his mettle by slicing through the gap to Catie Munnings and claiming second place, followed quickly by a spectacular move on Sanz to claim victory in the Shoot Out.

Drama unfolded before the first corner in the Ocean X prix Grand Final as GridPlay winners Veloce Racing opted to start on the third grid slot, but the advantage was quickly lost as Stéphane Sarrazin was squeezed out at the first gate dropping back to last position.

JBXE’s Mikaela Ahlin-Kottulinsky picked up rear-wheel damage before she even reached the first corner and inevitably was forced to retire the car, as was Cristina Gutierrez in the X44 car who came to blows with the Rosberg X Racing ODYSSEY 21 – in an incident reminiscent of the two Formula 1 World Champions on-track disputes in 2016 – at turn one and ended her day on the sidelines.

Molly Taylor and Sarrazin were therefore left to fight it out for the lead, with the Frenchman closing the gap throughout the lap and ending his stint hot on the heels of the 2016 Australian Rally Champion.

To ensure officials could safely clear the stricken X44 and JBXE cars, a brief red flag was deployed, as the intense battle for the lead was put on hold whilst the drivers made their way into the switch zone. A standing start restart was initiated as Jamie Chadwick and Johan Kristoffersson prepared for an all or nothing, one-lap showdown.

A close-fought drag race down to the first gate ended with light contact between the two ODYSSEY 21s handing Kristoffersson the advantage. Once he had reached the technical section of the course, the three-time FIA World Rallycross Champion began to stretch his legs opening up a 15-second advantage to win Rosberg X Racing’s second Extreme E X prix in succession.

“It’s so fantastic to have won today! Coming here, it felt like we had a lot of work to do over the weekend, and it certainly didn’t come easy. But with every session, we just kept our heads down and just saw where we needed to improve, and everything totally paid off in the end,” said Rosberg X Racing’s Taylor.

Sailing to Greenland
With the conclusion of the Ocean X Prix, the Extreme E fraternity and vehicles return to the championship’s floating paddock – the St Helena. This specially configured ship is being used to provide transport to each venue to reduce carbon emissions and also serve as a scientific laboratory for researchers accompanying the event. The next round will be the Arctic X Prix in Greenland on August 28/29.

The other side of EXTREME E

Apart from being an exciting motorsport series, Extreme E is using the power of sport, and the excitement of motor racing, to inspire fans to take practical steps on climate change. At each of the race locations, various environmental activities will be carried out to help local communities as well as create awareness.

In Dakar, Extreme E has teamed up with local NGO, Oceanium, to plant one million mangrove trees in Senegal. In addition, Extreme E will support the EcoZone Project, a living lab that addresses the Lac Rose community’s primary needs while preserving the environment through experiential learning, regenerative agriculture and a circular economy.

The Oceanium project, which Extreme E has identified in partnership with TO.org, will focus on five areas totalling 60 hectares – the equivalent of around 112 football fields – with the aim of reforesting mangroves, providing education to local populations and improving social cohesion.

Mangroves are one of the richest ecosystems in the world, providing essential goods and services and playing an important role in the life of coastal communities in countries like Senegal. In addition to being an excellent carbon store, they reduce flooding and erosion from storms, act as nurseries for fish and filter salt and pollutants from water.

Senegal has around 185,000 hectares of mangrove estuaries in the regions of Casamance and Sine Saloum but unfortunately, these are disappearing very quickly. Between 1980 and 2000, 25% of Senegal’s mangroves and 35% of the world’s mangroves were lost due to droughts and deforestation. The loss of mangroves is having a negative impact not only on the environment, but also on local communities that depend on them for their livelihood, making it so important to restore these degraded areas.

After Formula E, Extreme E will take electric cars into off-road competition

External designers create Virtual Interiors for Lexus LF-Z Electrified concept

Lexus, like the Toyota brand, is headed along the electrification road and more fully electric models will be added to the range in coming years. This next chapter has been started by the LF-Z Electrified, concept vehicle which made its world debut at the end of March this year. While a model looking exactly like the LF-Z Electrified might not be in showrooms, the concept car suggests the direction of the evolution of Lexus styling.

The interior of the concept car was developed by Lexus’ own designers and has many futuristic elements, as would be expected. Now, in a new approach, the brand has introduced the LF-Z Electrified Virtual Interior series to create a synergy between art, fashion, lifestyle, and technology that challenges the status quo of the automotive space. Conceived as a platform for collaboration, it brings together ambitious and innovative talent across a range of creative practices.

2021 Lexus LF-Z Electrified Concept — *The LF-Z Electrified concept and the interior developed by Lexus designers (below).*

For the Virtual Interior series, Lexus has partnered with three pioneering artists and designers to re-imagine the concept car’s interior. Star footwear designer Salehe Bembury, digital artist Ondrej Zunka and Japanese fashion label Hender Scheme bring virtually rendered interiors with future-inspired design, Japanese heritage and takumi craftsmanship, and an enhanced human-machine connection.

“LF-Z Electrified embodies the future of the Lexus brand, so it is exciting to see that future represented by such diverse talent across the design space,” said Brian Bolain, General Manager at Lexus International. “Each of the collaborators brings a fresh energy that not only reinterprets the interior of the LF-Z but also examines the themes of Lexus’ next chapter.”

Salehe Bembury
Kicking off the series is award-winning footwear designer Salehe Bembury, whose interior design concept embraces the future. Bringing his nature-inspired design approach to the LF-Z Electrified, Bembury conceptualized a virtual interior that blends both a futuristic aesthetic with organic materials alongside his signature use of bright colour.

His concept interior uses colours inspired by sandstone landscapes and other natural tones, setting aside traditionally futuristic materials in favour of natural materials like cedar, cork and granite. These natural materials sit alongside textiles and patterns that reference Bembury’s background in sneaker design, such as a ‘hairy’ suede used on the seatbacks, and a fingerprint motif that is often found in the designer’s work, applied here for a personalized control panel.

Ondrej Zunka
Forgoing traditional notions of car design and transporting the LF-Z Electrified further into the future, Ondrej Zunka’s cabin concept features space-age mechanisms, sci-fi materials and multidimensional hues that transcend both time and space.

“This interior design is purely speculative, so I allowed for free associations and pure imagination and creativity,” explained Zunka. “I wanted to make the interior feel as if it wasn’t made by humans, but maybe designed by a sophisticated Artificial Intelligence. I wanted to go past any known language and design concepts and forget about what is usually used in automotive interior design.”

Looking at Lexus’ commitment to intuitive technology, Zunka, through the lens of his digital art practice, renders a virtual interior that pushes the boundaries of functionality and design. The tech-forward interior imagines intelligent lighting along the car’s panels that emit an entirely visceral sensation that subtly regulates mood. Translucent silicone seat cushions with memory foam-like properties and a panoramic ceiling, crafted from brushed chrome, complete Zunka’s hyper-futuristic vision for the Lexus LZ-F Electrified.

Hender Scheme
With their deep focus on the natural material characteristics of leather, Tokyo-based fashion label Hender Scheme was a natural fit to reflect Lexus’ Japanese heritage and takumi craftsmanship. For virtual interior, Hender Scheme imagined an entirely leather interior juxtaposed with the concept vehicle’s groundbreaking technology. The untreated, organic material will develop a ‘patina’ over time, deepening in colour and becoming unique to each vehicle. The concept reflects the passage of time and the driver’s relationship to the vehicle.

In a process that mirrors the 60,000 hours of experience required of a Lexus takumi craftsman, the design is rooted in the work of specialty craftsmen. At the beginning of the process, leather requires trained eyes to identify its natural material characteristics for use on the project such as thickness and elasticity. From there, molding methods would be introduced to shape the leather to the roof, doors and dashboard, beautifully finishing these sculptural parts.

Lexus LF-Z Electrified Concept

Full-width displays on dashboard coming soon to more cars

The vehicle dashboard – that area below the windscreen at the front of the cabin – began with one side being dedicated to the driver (and associated with the ‘cockpit’ of an aircraft) and the other for the front passenger. It was generally like that for decades, the surface of the dashboard punctuated by various controls, switches and other ornamental decorations.

As more electronic systems were installed and more information could be presented on displays, the cockpit area widened. Then came infotainment, when more than just a radio or CD-player provided entertainment; as connectivity grew, the dashboard came the be used to house various systems which even passengers used and even wider displays appeared.

From pillar to pillar
Now, as we have seen with some of the latest Mercedes-Benz models, huge displays extend the full width of the dashboard to provide all kinds of information for the driver and other occupants. Fifty years ago, such an idea may have been seen only in concept cars but are now becoming a reality in production models the public can buy.

*Dashboard of a Mercedes-Benz S-Class in the 1950s and dashboard in the latest Mercedes-EQ EQS (below).*

The concept won’t be limited to a few brands as Continental has developed a pillar-to-pillar display and it is available to any carmaker. In fact, one global vehicle manufacturer has already placed a major order with Continental and will have the super-wide display in a production model in 2024.

Continental’s display that extends across the entire width of the dashboard is an integrated display solution from one roof pillar to the other at the front, providing space for a growing number of vehicle functions, digital services, as well as communication and infotainment applications. The solution makes the display the central visual interface between the driver, front passenger and digital driving experience.

Milestone in evolution of the car
Its launch in a high-volume production model marks another milestone in the evolution of the car into a smart device as part of the internet of things (IoT). Whether it is navigation, warning signs, movies, news, social networks, office applications or booking apps to plan the route, the information will be shown and easily viewed. Continental adds that the content will be ‘fully immersive and offers drivers and passengers a completely new user experience’.

“A driving experience that is digital and safe is becoming the most distinctive feature of modern cars. The size of the displays and their intuitive operation play a central role here. In short, what used to be horsepower is now screen diagonals and user experience,” said Dr. Frank Rabe, Head of the Human Machine Interface business unit at Continental.

“With the user experience, we already create value today. Each year, we supply a total of around 120 million products for human-machine interaction, equipping one in four cars worldwide. With the increasing significance of automated driving, the way in which we spend our time in cars is becoming even more important. As a result, there is also a growing need for solutions and services for the in-vehicle user experience.”

From pointer instruments to digital displays
Speedometer, tachometer, fuel consumption gauge – the time of the classic instrument panel is over. In view of the multitude of new vehicle functions and digital services that are pushing into cars with increasing connectivity, traditional pointer instruments and centre consoles are now too rigid and inflexible. The switch to vehicles with electric powertrains also changes some of the running information that has to be shown.

An exclusive focus on the driver is also no longer appropriate for the wide range of communication and infotainment services now available for vehicle occupants. Therefore, displays have been getting bigger and bigger for years. This also poses design challenges which, over time, have resulted in different shapes: from flat displays to curved displays that fit seamlessly into the cockpit, into V, C, L or S-shaped displays, accommodating both the driver and the front passenger, so that they can be reached with minimum effort.

As the size increases, several displays are connected under one surface to form a single unit. Creating invisible transitions is not the only crucial aspect here. Sensors and cameras that record driver behaviour can be seamlessly integrated. Convex and concave shapes are also increasingly being used so that the user can perceive the operating elements intuitively.

Transforming vehicle electronics architecture
Whether it is 3D without special glasses or pillar-to-pillar displays, Continental has been a pioneer in this digital cockpit evolution. In addition to the further development of screen solutions, the company is also driving forward the transformation of the vehicle electronics architecture with concepts such as the high-performance computer for the cockpit. In view of the fact that a few high-performance computers will replace the previous large number of dedicated control units in the future, the pillar-to-pillar display is the next evolutionary step and an expression of the increasing convergence of the car to a mobile data centre.

Mitsubishi Motors Malaysia contributes Triton to INSAF Malaysia

Non-profit organisations (NGOs) carry out a lot of work which involves travelling to and in areas where the roads may be poor, or may not exist. Typically, they will bring various forms of aid, especially food for those who are victims of poverty or natural disasters. INSAF Malaysia is one such NGO which runs several programs to transport food items.

To help them with their mission, Mitsubishi Motors Malaysia recently contributed a Triton 4×4 pick-up truck to INSAF Malaysia. The pick-up truck, a popular model in the market, will be useful for the distribution of food bank, lunch box and rice bags to orphanages and welfare homes, as well as ‘Meals on Wheels’ where food is distributed to old folks who have been abandoned or live alone. The NGO also builds shelter homes for those hit by natural disasters and urgently need a roof above their heads.

Promoting sustainable economy, society and environment
“Our CSR vision for this year is ‘Inspiring Lives Today for a Greater Future’. While our missions are to implement CSR activities that provides aid to support underprivileged children, and to collaborate with NGOs in promoting a sustainable economy, society and environment. So when we found out that INSAF Malaysia’s humanitarian efforts is constantly striving for voluntarily action, we want to support their work by contributing a Triton pick-up truck in hopes that the NGO can go beyond the distance and to help more underprivileged families,” said Tomoyuki Shinnishi, CEO of Mitsubishi Motors Malaysia.

After receiving the Triton on behalf of INSAF Malaysia, its President and Founder, Ishak Bin Abdul Kadir, said: “We have been witnessing a dangerous trend from the number of people suffering from malnutrition and food insecurity, especially during this pandemic. Hunger is on the rise in Malaysia as we’ve seen lot of breadwinners lose their source of income which leads to the inability to put food on the table. We are doing all that we can to make sure children or families don’t go to bed hungry hence we are so glad to have companies like Mitsubishi Motors reach out to us to offer help. The contribution of the Triton pick-up truck is timely, practical and very much appreciated.”

Popular pick-up truck
The Triton provided is one of the six variants available, all imported from Thailand in CBU (completely built-up form). The model has been among the popular pick-up trucks in the Malaysian market for many years. Early last month, the Athlete version was introduced which takes over from the Adventure X as the flagship of the range. In Peninsular Malaysia, prices start from RM100,200 for the variants with 4×4 and RM79,890 with 4×2.

Visit www.mitsubishi-motors.com.my to know more about the Triton, and the locations of authorised dealerships.

Mitsubishi Triton Athlete takes over as flagship of range from Adventure X

Everrati Signature Widebody – an electrified Porsche 911 (964)

Visit www.bhpetrol.com.my for more information.

Everrati Automotive Limited, a British company specialising in converting iconic cars to run with electric powertrains, has unveiled its new flagship, the 500-bhp Signature. It is developed from a fully restored 1991 Porsche 911 964 and has been given widebody treatment with carbonfibre elements.

The Signature joins other Everrati electrified models such as the Mercedes-Benz SL Pagoda (its first conversion in 2019), along with 911 (964) Coupe and Targa models, a 911 (964) Gulf Signature Edition, and a Land Rover Series IIA.

Carbonfibre parts, including roof
To create the wide body, Everrati replaced the steel front and rear wings and bonnet with custom produced carbonfibre parts. The same material is also used for the doors, although these are reinforced with high-strength steel to retain side impact protection.

A carbonfibre roof is offered, along with the choice of a steel item for customers who wish to retain a sunroof where fitted to their car. The front and rear bumpers are refitted with genuine Porsche widebody items, to which RS Cup air vents are added. Thanks to this high-tech and meticulous approach to weight saving, the Signature widebody weighs less than the original 911 (964) Coupe.

A key part of the meticulous, sympathetic restoration and re-engineering process is the integration of the car’s new, sustainable-focussed heart – the electric propulsion system. “We install a state-of-the-art EV powertrain, which has its power delivery optimised specifically for the Signature widebody and is coupled to a 53-kWh battery pack and battery management system,” explained Everrati Director of Engineering, Mike Kerr.

500 bhp and 500 Nm
Sending 500 bhp to the rear wheels, the Signature widebody has more than double the power output of an original 1990s Porsche 964. With 500 Nm available from almost standstill, the car can accelerate to 100 km/h in less than 4 seconds and depending on driving style, travel for 240+ kms on a full charge, it is claimed. Recharging the battery pack to full from 10% is said to be possible in less than an hour with a DC fast charger.

Everrati retains the car’s aluminium rear trailing suspension arms, refurbished to new, with all bushes and drop-links fully uprated. Customers are offered a choice of two suspension settings: standard suspension with fully adjustable motorsport-grade coil-over spring/damper units, and a fully adjustable package with adaptive dampers that are fully programmable from within the cockpit via a touchscreen.

Brembo stopping power
The EV powertrain provides regenerative braking when the driver lifts off the accelerator pedal, capturing energy that would be wasted. The driver can adjust the level of regenerative braking force available to enable one-pedal driving. The uprated mechanical braking system features fully renewed Brembo Porsche calipers with new drilled, ventilated discs all around. An optional, even more powerful braking system is available with larger Brembo calipers front and rear.

Customised and original
As for the interior, the cabin can be personalised to customers’ individual tastes in numerous ways, thanks to a wide range of optional materials and fittings. The original Porsche seats are fitted, which are significantly enhanced for comfort and replicate the look of the original RS Touring Seats, and optional Carbon RS seats provide an even more sporting ambience. The upholstery can be in leather, alcantara, or other materials and in a wide choice of colours and optional finishes and textures.

Customers can also have custom-designed heating and air conditioning system and add a modern Porsche Classic Communications Management with full touchscreen navigation, DAB+, Bluetooth, and Apple Car Play. All of the car’s traditional gauges are replaced with Porsche-inspired EV gauges, and as with the internal combustion engine and transmission components, the original gauges can be retained for the customer on request.

Reversible engineering
“At Everrati, it is sacrosanct that all engineering is reversible, should current or future owners want to revert back to the car’s factory specification,” said Nick Williams, Everrati’s Founder and COO, who previously held senior roles with Daimler and the Volkswagen Group. “If customers wish, the car’s original internal combustion engine and transmission can be refurbished and placed in storage, or even incorporated into a piece of art, such as a glass gable or Perspex box. Whatever the customer can imagine, we will do our utmost to make it a reality.”

Over the coming months, the Signature widebody will continue to undergo its full development programme. For those who are interested in acquiring one, prices start at £250,000 (about RM1.47 million), based on a customer-supplied donor car.

Bringing modern connectivity to old Porsche models

Bugatti and VIITA develop a range of smartwatches

Even if you don’t own a Bugatti (and only a small number do), you can still own a smartwatch which matches their cars in technology, materials and design. Together with Austria’s VIITA Watches, a new range has been developed named in tribute to the French marque’s hypercars: the Bugatti Ceramique Edition One Pur Sport, Bugatti Ceramique Edition One Le Noire and Bugatti Ceramique Edition One Divo.

Each handmade smartwatch model offers an innumerable number of technical features, including 90 different sports, oxygen level in the blood, acceleration, and specifically for the Bugatti watch, a GPS tracking mode. To quickly adjust to new technologies and customer demands, VIITA has developed its own software.

More than 1,000 parts
The team that developed the watches comprised watch experts as well as IT specialists who integrated more than 1,000 individual parts. Forming the backbone of every smartwatch is the high-strength and hypoallergenic cover, forged from lightweight titanium. The display is a high definition 390×390 pixel LED touchscreen with 16.7 million colours, within a scratch-resistant housing of sculpted sapphire glass.

The bezel – located at the most exposed point on a watch – is carefully sculpted and milled from scratch-resistant ceramic to the smallest of tolerances, made possible by an ultraprecise CNC process. The bezels for all three models are made of scratch-resistant ceramic, elaborately finished by hand in a production process lasting 20 days. With the special key supplied, the customer can replace a bezel within one minute.

All types of data
The watch measures and stores numerous types of electronic data, among them health data. A new dual-sensor measures both heart rate and heart rate variability to report individual health data. Cardiovascular recovery, training recommendations, biological age and stress level measurements are each generated and supported by VO2Max.

The GPS sensor has been especially developed for the watch and has an entirely new level of accuracy and resolution rate. Wearers taking it to the racetrack can have their lap times and acceleration values logged automatically by the GPS sensor. This feature is applied for the first time in the world in a smartwatch.

Battery life is claimed to be up to 14 days between charges, made possible by a custom-built 445mAh power cell. As a statement of the quality of the watch, a warranty of 5 years is given.

There is the option of a tailored Bugatti rubber wrist strap or a bespoke titanium strap to complement the titanium theme of the case. It is also possible to customize the watches to reflect the owner’s personal style.

Priced from RM4,500
The watches will be available in the fourth quarter of this year and Bugatti is now accepting full prepaid pre-orders on Kickstarter. Depending on the model and spec, the cost would range from €899 to €999 (about RM4,500 – RM5,100).

A Bugatti engine on your wrist

Piston.my

Latest News

EXTREME E | ROUND 2 – Ocean X Prix in Dakar, Senegal

External designers create Virtual Interiors for Lexus LF-Z Electrified concept

Full-width displays on dashboard coming soon to more cars

Mitsubishi Motors Malaysia contributes Triton to INSAF Malaysia

Everrati Signature Widebody – an electrified Porsche 911 (964)

Bugatti and VIITA develop a range of smartwatches

Rec Watches 98T/4: A Timepiece Tribute to Ayrton Senna and Lotus’ Iconic Formula 1 Era

Nissan Unveils Four NEV Concepts Developed with Dong Feng

Lotus Evija X: Fastest Production Chassis Around the Nürburgring

Mazda Unveils the Arata SUV Concept – EV and PHEV Options

Mazda EZ-6 Unveiled For China Market – Rear-Wheel-Drive, 600km EV Range

All-New Toyota Yaris G Limited: RM99,600 With Only 600 Units Available

BMW Malaysia Unveils the New iX3 Final Edition – RM300k, 286hp, 461km Range

Mini Unveils the All-New Aceman with Two Powertrain Options

The New BMW i4 and 4 Series Gran Coupe Receive Minor Changes

Lamborghini Urus SE: The First Plug-in Hybrid Super SUV

Archive

MOTUL Announces its Strengthened Presence in Malaysia

Sime Darby Racing Team Returns to Compete in the Porsche Carrera Cup Asia 2024

Volvo’s Rebranding Strategy for Electric Mobility

All-Electric Maserati MC20 Folgore To Make Debut Next Year

Kia Unveils Australia-Inspired Camouflage for the Tasman Pickup Truck

Follow us on Facebook

Follow us on YouTube

The Piston Show