Home - Piston.my

Drones provide a more exciting perspective of motorsports events like Extreme E

Until this century began, motorsports were viewed mostly at ground level, with spectators able to see cars zooming by on a rally stage or a closed circuit. Major events had aerial coverage which required using a helicopter which wasn’t cheap. In-car footage had been available earlier though but usually available only after the event.

Today, spectators and viewers around the world can watch an event from overhead as drones have made it easier and cheaper to capture imagery from above. Even ordinary drones can provide a view that is exciting and give a broader perspective.

As good as watching from a helicopter
One example of drones being used for motorsports is in the unique Extreme E series for all-electric off-road SUVs. The series has so far gone to the Saudi Arabian desert and the long beaches of Senegal, with the next venue to be Greenland. And at each of the first two rounds, viewers have been able to follow the vehicles as they raced over the rough terrain and able to watch exciting overtaking manoeuvres from overhead. It’s as good as having a helicopter of your own to watch!

The company that is covering the Extreme E rounds is Aerios Solutions which not only captures the footage but also broadcasts it live to a worldwide audience. The drones, which are ‘must-have’ for entertainment and audience wow factor, offer a degree of dynamic perspective that no helicopter or plane could possibly achieve. They are event environmentally friendly in that they don’t need fossil fuel to operate, unlike helicopters. Drones run on electricity and their batteries are recharged on-site using Extreme E’s hydrogen fuel cell generators.

Highly skilled drone pilots
Aerios Solutions, a leader in drone filming technology – has 3 champion stunt helicopter pilots on its team. “It’s safe to say we have a pretty experienced crew at Aerios Solutions!” said its Director Martin Taylor. “Two of our crew are actually world champion helicopter stunt pilots, and all of our pilots have extensive experience in the drone industry including working in major film productions.”

The skills of these pilots are required to control the drones that capture the ODYSSEY 21 SUVs in what is likened to ‘Star Wars meets Dakar Rally’ style racing. “As a race series, Extreme E represents so many world firsts. Live sports programming with this level of remote production has not been done in these parts of the world before. In Greenland, we’ll be in a valley with a glacier on the side; in Senegal, we were on a beach next to a lake; and in Saudi, we were literally in the middle of a vast desert canyons. Getting live pictures out of these places with the level of integration we’ve got, just hasn’t been done before,” Extreme E’s Chief Marketing Officer, Ali Russell, proudly explained.

Aerios Solutions came on board as it was well known to Extreme E’s film production company, Aurora Media, in the past. They were an ideal outfit to get the coverage and nobody else is doing anything close – in extreme environments, with augmented reality and really dynamic coverage.

*The drones can capture views like these, giving the audience a more exciting perspective of close duels – and the broadcasts are delivered live worldwide.*

Operating in remote locations
There is no doubt that it is insanely tricky flying and shooting in Extreme E’s remote locations. However, even before that starts, the logistics are among the main challenges. “Getting a whole live broadcast to such remote areas is a huge challenge. There is absolutely no infrastructure on site before Extreme E arrives there. Every piece of equipment has to be transported to the operating site. Thinking ahead and planning are essential to making the operation a success,” said Taylor.

“Transport around site is difficult, and we normally need 4-wheel drive vehicles just to get to the operating positions. The remote locations have given us some unique challenges, from the baking sun and steep canyons of Saudi Arabia, to even being chased by vultures in Senegal!” he revealed.

“In terms of equipment on-site, we have three main large drones for live broadcast, along with numerous small FPV (First Person View) drones. these are extremely small, extremely quick, lightweight and agile racing drones which we use for recording fast dynamic, close shots,” Taylor said.

The three actual broadcast drones, made by a company in the Netherlands, are highly modified versions of the Acecore Technologies Neo and Zoe drones. They are large, stable platforms able that carry not only the camera and gimbals, but also the complex broadcast equipment and they can fly in all weather conditions which is pretty important in this championship.

Working together from 3 countries
In total, there are 6 pilots on site, operating three drones simultaneously. There is an engineer on call in the UK, along with Taylor in the broadcast suite in London. To carry out live broadcasting to millions of screens around the world, the footage is transmitted from the drones to receivers on-site. From there, the signal is transmitted to the director and producer in the broadcast compound and then, via satellite, to the broadcast suite in London. Finally, the signal is transmitted to a technical team in the Netherlands. After all this, the signal travels back to the on-site broadcast team, before finally being transmitted worldwide via satellite.

Even if you consider yourself a fairly competent pilot of a DJI drone, the drones used by Aerios Solutions are extremely complicated to operate. A minimum of two pilots is needed to operate each drone – one pilot controls the drone itself, the other the camera/gimbal.

“The main skills required are a high level of piloting skill. The pilots need to be extremely skilled and experienced in actually flying the drone and, of course, technical skill meaning they need to be able to maintain the drones in the remote areas. Also, team working skills – the pilot and gimbal/camera operator work as a team to get the live broadcast shots. Normally, the gimbal/camera operator directs the pilot, but they work together ‘as one’,” said Taylor.

He added that communication skills are also important. Not just communicating with each other as they chase the vehicles around the course but also with the production team. They are directed from the on-site producer, the on-site director and the production team in London.

Click here for other Extreme E news and articles.

Huber delivers first unit of its Lamborghini Aventador facelift

Earlier this year, coachbuilder Huber announced a Lamborghini Aventador facelift, and the first unit has been delivered to a customer in the United Kingdom. The customer is the membership Secretary of the Lamborghini Club UK, Ciro Ciampi who also founded the car community known as ‘Petrolheadonism’.

Ciampi received his latest toy on the lawn of the former residence of David and Victoria Beckham. The property is currently home to one of Britain’s most private car collections, creating a spectacular setting for the handover. The scene was not only complemented by the car collection but also by the attendance of Italian supercar patron, Fabio Lamborghini. He was impressed by the Era and happy to give his approval by being the first to unveil the car to the world.

Designing for the aftermarket
Led by Sean-Peter Huber, the UAE-based brand is on a mission to build a new community of collectors and car enthusiasts who value going back to the drawing board. His passion for car design has put them in uncharted territory in the aftermarket, but the first steps are already telling of what an exciting future the brand holds.

Entitled ‘Era’ to mark 10 years of the Aventador and to pay homage to the end of its production, Huber’s Era has created a new take on one of the worlds most revered supercars. The team focused on creating new body panels that respect the familiar DNA, exchanging the front and rear bumpers with an entirely new design in carbonfibre and an optional carbonfibre boot. Huber said: “The Era should remind us of how much we all admired the Aventador when it was launched in 2011”.

Limited to 21 sets
The fully-funded project is independent of Lamborghini with the first batch of bumper units already taken up by selected collectors who have been supporting Huber’s vision from the start. The Era price starts at 30,000 euros (about RM150,000) and will be limited to 21 pieces in the current edition.

According to Raj Singh, founder of Supercar Service Ltd (Huber’s UK distributor), in their 11-year history, they have not found an aftermarket design that integrates so well with the LP-700-4 chassis. As an option to customers around the world and to assure quality control, Huber has designated Supercar Service as ‘flying service’ partner, sending personnel to customer locations to assemble the Era.

Even after you recover from COVID-19 infection, your quality of life may be affected and you can suffer for a long period after that. So do your best to avoid being infected by taking the necessary measures to protect yourself as well as others – and get vaccinated.

PLUS headquarters selected as Integrated Public Vaccination Centre

Getting as much of the population vaccinated to help reduce the severity of COVID-19 infection is a priority. The effort is being carried out by the government as well as the private sector, which is providing areas to set up vaccination centres. One such company is PLUS Malaysia Berhad which has established an Integrated Public Vaccination Centre (PPV).

The IPVC has been set up in partnership with its medical advisory partner, Primer Cherang, together with Protech Health, the implementer of private medical practitioner and healthcare NGO participation in the National COVID-19 Immunisation Programme (PICK). The IPVC is at the PLUS HQ situated near the Subang exit off the New Klang Valley Expressway (NKVE) in Selangor. The facility can inoculate up to 2,000 persons per day.

One of 14 public immunisation venues

The COVID-19 Immunization Task Force (CITF) has selected the PLUS HQ as one of the 14 public immunisation venues to accelerate the dispensing of vaccines through Operation Surge Capacity. This will ensure that all adults will receive at least one dose of the vaccine by August 1 and help flatten the infection curve.

“As of Sunday, July 25, PICK has reported that over 16 million doses comprising first and second doses have been administered, of which11.5 million of our population has received their first dose and over 5.4 million are fully vaccinated with two doses. Based on this data, PLUS is proud to be able to play its part in helping the country to ramp up its immunisation numbers. The sooner we are able to attain the target to allow us to enter Phase 4 of the National Recovery Plan, the sooner the economy can improve, and businesses can revive,” said Datuk Azman Ismail, Managing Director of PLUS.

“I urge you to regularly check your MySejahtera updates and who knows, you may be visiting our Persada PLUS HQ soon. In the meantime, continue to adhere to SOPS if you must be out and about; if not, it would be best to work from home where possible until you are fully inoculated. Hopefully by then, as the government has indicated, you may get to travel on our highways again,” he added.

The participation also provides the opportunity for the employees of PLUS to be part of something meaningful and historical. Warga PLUS will join as volunteers and assist the 150 health personnel from Primer Cherang and Protect Health.

The National Vaccination Program in Malaysia is free of charge.

SsangYong shows sketches of future X200 SUV with new design philosophy

Although SsangYong Motor is still in a difficult financial situation, product development and business activities are still ongoing. Work on new models continues and one of the models that will be in showrooms will be a next-generation SUV presently designated ‘X200’. The Korean carmaker, owned by India’s Mahindra Group, has a newly created design vision and philosophy and this is being adopted for the new model.

New design philosophy
“The design of the new X200 is based on SsangYong’s new design philosophy ‘Powered by Toughness’, and follows on from our recently announced J100 mid-sized electric car. With this new design, the company is showcasing its new product identity to communicate a powerful and modern SUV while drawing on the inherited values its authentic heritage,” a spokesperson for the company said.

‘Powered by Toughness’ is a design philosophy that emphasises the importance that SsangYong places on the value of design. Along with the themes of strength and modernity, it underpins its long standing ‘Korean Can Do’ message which has been central to the Korando product line over 4 generations, dating back to the original from 1983.

The design philosophy is based on four formative concepts: Robust Architecture, Unexpected Delight, Vibrant Contrast, and Communion with Nature. “Of these four elements of sculptural identity, ‘Robust Architecture’ pursues the beauty of tough structural shape and detailed sculptural beauty. ‘Unexpected Delight’ appeals to differing lifestyles, offering amusement and excitement by embodying a design that values more than mere transportation. ‘Vibrant Contrast’ expresses the original characteristics of a tough SUV through the contrast between aesthetic elements of colour, texture and modelling, while ‘Communion with Nature’ is intended to harmonise with the natural world, echoing the sensibilities of our customers,” explained Lee Kang, Head of the SsangYong Design Centre.

*Early generations of the SsangYong Korando (above and Musso (below)*

Korando and Musso heritage
Besides being guided by the design philosophy, SsangYong’s future models, such as the J100 midsize electric model and new X200, will be designed with the heritage of the original Korando and Musso. These two SUV models are of significance in the company’s and Korean automobile industry’s history.

It is expected that the design philosophy will allow consolidation of its position as an authentic SUV brand. Forward-looking elements will include the use of eco-friendly powertrains, responding to the biggest trend in the automotive industry which is now taking place.

J100 well received
Public response to the first design reveal of the J100 (shown below) last month on social media channels is said to be extremely positive and strong. The designers are also encouraged by feedback on the J100 and derivative pick-up model on which has indicated considerable positive interests.

“We have re-interpreted our future design vision and product philosophy by drawing heavily on our unique heritage. With the forthcoming J100 and X200 models, we have drawn a line in the sand in terms of design, and everything from this point forward will follow this new brand design direction. It is a very exciting time for SsangYong and will build on the history and heritage of its unique and distinctively authentic SUV designs to impress its customers of the future,” Mr. Lee Kang promises.

22-inch carbonfibre wheel for Bentley Bentayga from late 2021

The wheels for the first cars were made of wood, carrying over from the wheels of horse carriages. Eventually, metal was used, which provided much durability and complemented the auto industry’s manufacturing processes. Steel wheels were commonplace for many decades but as the need to reduce weight became more important, lightening the wheels led the industry to use aluminium alloy.

As the 1970s began, Michelin introduced in innovation for wheels – carbonfibre construction. The initial application was for a rallycar but before long, they were more widely available but still rare as they cost a great deal of money. It was only in 2013 that Koenigsegg offered monolithic carbonfibre wheels on its cars, with a set said to cost around US$40,000.

Why use carbonfibre?
One of the main advantages of using a composite material like carbonfibre is that it is lighter than steel or aluminium. The nature of the material also means it generates less noise and vibrations, making for a nicer, quieter ride. This makes such wheels desirable for luxury cars but their cost remains high.

After years of development with one of the world’s leading composite suppliers, Bentley now has a new carbonfibre wheel developed specifically for the Bentayga. The 22-inch wheel, engineered with Bucci Composites of Italy, is to be the largest carbonfibre wheel in production in the world. It offers a vast range of benefits beyond the initial 6-kg improvement in unsprung mass per wheel.

Meeting tough TUV standards
The new wheel has been subjected to the exceptionally rigorous TUV standards and is the first carbonfibre wheel ever produced to pass all tests. The newly developed rim has undergone the most rigorous testing for non-metallic wheels according to the new TUV standards including biaxial stress testing, radial and lateral impact testing for simulating potholes and cobblestones, tyre overpressure, and excessive torque tests exceeding the permitted limits.

One of the most severe tests of the TUV requirements – the impact test – has shown how the carbonfibre rim is extremely safe in addition to the performance benefits. After a severe impact which would crack or shatter an aluminium wheel, the carbonfibre rim allows a slow tyre deflation, thanks to the intelligent layering of fibre weaves, allowing the vehicle to come to a controlled, safe stop. This would be of great value to a vehicle like the Bentayga which has off-road capabilities.

The new wheel has also been subjected to extremely high speeds. Engineers ran numerous tests around the Nurburgring Nordschleife before final sign-off to go into production.

The technological benefits
Carbonfibre not only provides a significant weight saving, but also offers the additional benefits of increased strength and stiffness. This leads to increased safety – when the rim receives a high impact, the weave pulls apart leaving openings to allow gradual air loss rather than instant deflation like an aluminium rim.

There’s also increased steering agility, thanks to the weight saving and the high stiffness afforded by the properties of carbonfibre which create a more stable and consistent steering platform. In comparison, a forged aluminium rim can lose up to a degree of camber due to wheel flex, reducing grip and agility.

The driver will also have improved and more responsive braking due to the decrease in unsprung mass. Reduced tyre wear is also a long-term benefit as the stiffer carbonfibre rim does not suffer from the same amount of bending. It therefore allows for greater tyre stability and a more consistent contact patch on a larger tyre support surface.

The production processes
One of the main innovations lies in the rim manufacturing process, which involves the application of innovative concepts (covered by patents) combined with the use of high-pressure RTM (Resin Transfer Moulding). The materials and production parameters have been carefully studied to ensure the repeatability of the product without affecting its quality.

The process involves the cutting of carbonfibre cloth into prescribed shapes. The weave segments are then stacked, heated and draped into a mould to create three-dimensional preforms. The preforms are collated and arranged into a larger mould before resin and hardener is injected throughout. After curing time at temperature, the component assembly is removed from the mould, and the final surfaces are machined to the correct finish, before polishing.

Joining Mulliner products in late 2021
The new carbonfibre wheel for the Bentayga will be join Bentley’s existing carbonfibre products, which include the highly sought-after Styling Specification that adds a carbonfibre front splitter, sill extensions and rear diffuser, and the option of high gloss carbonfibre veneer to the interior.

Click here for other news and articles about Bentley.

Vaccination does not make you immune to COVID-19 infection. You can still get infected and you may not show symptoms but spread the coronavirus. Do not stop taking protective measures such as wearing a facemask, washing hands frequently and social distancing.

Formula E/ Round 13 – Mahindra Racing’s Alex Lynn wins on home ground

It’s always a thrill for the home crowd when the winner is from the same country and British driver Alex Lynn sparked celebrations in the Mahindra Racing garage as he won the Heineken London E-Prix Round 13. Behind him were Mercedes-EQ’s Nyck de Vries and Mitch Evans (Jaguar Racing) who joined him on the podium.

Lynn had navigated a frenetic encounter that had it all, and the decisive moment of the race took place with the pack released from a spell under the Safety Car (a MINI Electric Pacesetter) on Lap 13. Down at the double hairpin, Oliver Rowland (Nissan e.dams) made a move for the lead with a surprise lunge on Stoffel Vandoorne (Mercedes-EQ) who had started from pole position.

A bump in the braking zone left the Nissan driver a passenger as he speared into the side of the Belgian’s Mercedes. The pair were left all tangled up, allowing de Vries to pick up the pieces and pinch second – and then first when Lucas di Grassi (Audi Sport ABT Schaeffler) leapt for ATTACK MODE.

With the track cleared, the Mercedes’ seized the initiative. Vandoorne led Rowland and de Vries away, and the latter was able to jump by the Nissan in the middle of the Silver Arrow sandwich to take second – thanks to that extra lap of ATTACK MODE relative to Rowland.

Another appearance for the Safety Car followed on Lap 11, with da Costa in the wall at Turn 1 after contact with Porsche’s Andre Lotterer. The Mercedes duo at the head of the pack did manage to sneak in their second ATTACK MODE activations just prior, crucially before Rowland this time.

Heading into the final quarter hour, di Grassi had made the most of that 35kW boost to slip by de Vries into Turn 1. On the next circuit, Lynn followed with what would ultimately be the race-winning move – the Mahindra driver also in ATTACK MODE. De Vries’ early dart for his second activation had not paid dividends, and he’d have to settle for second spot, while Evans picked his way through from fifth on the grid to an eventual third at the chequered flag.

Di Grassi had led on track for more than half of the race, and crossed the line first. The Brazilian was ultimately shown the black flag for failing to serve a drive-through penalty – deemed to have illegally taken the race lead by audaciously driving through the pit-lane, and crucially failing to come to a stop in his pit-box, under Safety Car conditions on Lap 12.

De Vries followed Lynn home with Evans 5 seconds back. Frijns crossed the line fourth – having climbed the order from eighth – while Porsche’s Pascal Wehrlein and BMW i Andretti Motorsport’s Maximilian Guenther completed the top six.

The weekend’s results put de Vries at the top of the Drivers’ World Championship heading into the final race weekend of Season 7 in Berlin in 3 weeks, while Robin Frijns’ points haul with fourth – up from eighth on the grid – proved vital and sees him second in the table, just 6 points behind the Dutchman. Sam Bird (Jaguar Racing) holds third in the standings.

Among the teams, Envision Virgin Racing still heads the way in the Teams’ running by 7 points from Mercedes-EQ, with Jaguar Racing third.

Piston.my

Latest News

Drones provide a more exciting perspective of motorsports events like Extreme E

Huber delivers first unit of its Lamborghini Aventador facelift

PLUS headquarters selected as Integrated Public Vaccination Centre

SsangYong shows sketches of future X200 SUV with new design philosophy

22-inch carbonfibre wheel for Bentley Bentayga from late 2021

Formula E/ Round 13 – Mahindra Racing’s Alex Lynn wins on home ground

New Honda HR-V Officially Launched – Prices Start From RM115,900

iCAUR Malaysia Unveils iCAUR iCONIC Roadshow at Desa ParkCity with All-Electric 03 SUV

Five Reasons Why: Never a Better Time To Buy a Honda CRV e:HEV RS

Chery Malaysia Pledges RM50,000 to National Sports Fund, Commits Proceeds from Tiggo Cross Sales to Athlete Development

Lamborghini Temerario Unleashed in Malaysia – RM1.35 Million

BMW Teases Hardcore Track-Focused M2 Package for 2025

Volvo’s All-Electric ES90: A Flagship Model with One of Its Lowest Carbon Footprints

UMW Toyota Motor Caps Off June 2025 with Strong Sales and National Engagement Push

Liberty Walk’s Legendary Ferrari F40 and Super Silhouette ER34 to Headline Tokyo Auto Salon Kuala Lumpur 2025

China Moves to Limit One-Pedal Driving in Electric Vehicles Under New National Safety Standards

Archive

OMODA JAECOO Unveils Revitalised Brand Identity and Milestones at Malaysia Autoshow 2025

Denza Malaysia Extends First Maintenance Interval to Enhance Customer Ownership Experience

Volkswagen Malaysia Unveils Golf GTI Black Edition with Striking Design and Enhanced Features

Isuzu Launches Production of All-Electric D-MAX Pickup Truck in Thailand

Government Approves New Funding Mechanism to Bolster Road Safety Initiatives

Follow us on Facebook

Follow us on YouTube

The Piston Show