Piston.my

Latest News

In due course, it will be possible for owners of the original Volkswagen T1 to make a conversion of the powertrain to a zero emissions electric drive system. Volkswagen Commercia Vehicles (VWCV), collaborating with eClassics, has developed a conversion package which is demonstrated in the e-BULLI all-electric concept vehicle.

VWCV engineers and designers formed a team along with drive system experts from Volkswagen Group Components and eClassics (a company which specialises in electric car conversions) to develop the e-BULLI. For the concept model, they chose a T1 Samba Bus produced in 1966 which, prior to its conversion, spent half a century on the roads of California.

2020 VW e-BULLI

New electric drive system components
The original 44 ps 4-cylinder boxer engine is replaced by a silent Volkswagen electric motor generating 61 kW (83 ps) and 212 Nm, the torque being more than double that from the engine before. The comparison of the engines’ power output alone makes it very evident that the concept vehicle will have completely new drive characteristics with performance unattainable using the original combustion engine.

Power transmission is by means of a 1-speed gearbox. The automatic transmission has 5 positions (P, R, N, D, B) and in position B, the driver can vary the degree of recuperation, ie of energy recovery when braking. The e-BULLI is claimed to have top speed of 130 km/h (electronically limited), 25 km/h more than the original T1.

1966 VW T1
The original T1 Samba Bus

Just like the powertrain of the 1966 T1, the combination of gearbox and electric motor integrated in the back of the 2020 e-BULLI drives the rear axle. A 45 kWh lithium-ion battery pack provides energy for the electric motor while a DC/DC converter provides 12V power for on-board electronics.

As in the new ID.3 and future ID.BUZZ, the battery pack is housed centrally in the vehicle floor. This layout lowers the e-BULLI’s centre of gravity and thus improves its driving characteristics.

2020 VW e-BULLI

80% recharge in 40 minutes
The battery pack is charged via a combined charging system (CCS) socket. It enables charging with AC or DC electrical supply. Thanks to the CCS charging socket, the battery pack can also be charged at DC fast-charging points with up to 50 kW of charging power. In this case, recharging up to 80% energy levels can be done within 40 minutes. The range with a fully charged battery packs is claimed to be more than 200 kms.

Redesigned chassis
Compared to the T1, riding in the e-BULLI will feel completely different. This is due to the redesigned chassis which consists of multi-link front and rear axles with adjustable shock absorbers and coil-over struts. There is also a new rack-and-pinion steering system and 4 internally-ventilated disc brakes.


Click here to know more about the Volkswagen models available in Malaysia

New looks
In parallel with the new electric drive system, an interior concept has been created for the e-BULLI that is both stylish and avant-garde. The new look and corresponding technical solutions were developed by the VCVW design centre together with a team from VWCV Vintage Vehicles and the Communications department.

The designers modernised the exterior of the iconic vehicle with great sensitivity and finesse, including giving it a two-tone paintwork finish in Energetic Orange Metallic and Golden Sand Metallic MATTE.

Details such as the new round LED headlamps with daytime running lights modernise the looks. On the outside at the rear, there are also LED charge indicators. They signal to a driver walking up to the e-BULLI how much charge the lithium-ion battery still has.

2020 VW e-BULLI

Original interior concept modernised
The 8-seat interior has a few things not expected to be in a T1. While the designers have re-imagined a lot of the interior, they did not forget the original concept and the seating is one of the new features. In keeping with the external paintwork, it is also in two colours. Solid wood looking like that of a ship’s deck is used for the floor throughout and, with the nice bright leather tones, the electrified Samba Bus takes on a maritime feel. This impression is strengthened by the large panoramic folding roof.

The new speedometer is based on the original while a two-digit display within it creates a link to the modern era. There is a small detail in the centre of the speedometer: a stylised Bulli symbol. A multitude of further information is shown via a tablet integrated into the roof console.

2020 VW e-BULLI

Music on board comes from an authentic-looking retro-style radio which is equipped with cutting edge technology such as DAB+, Bluetooth and USB. The radio is linked to a sound system with high quality components, including an active subwoofer.

2020 VW e-BULLI

The e-BULLI will be available at prices starting from 64,900 euros (about RM307,000) for the T1 conversion (complete with redesigned front and rear axles), with T2 and T3 conversions also being offered by eClassics in Europe.

StayAtHome

PISTON.MY

Skoda, the Czech carmaker has been training and developing talent for more than 90 years at its Vocational School in Mlada Boleslav. In the first year, 58 students began their training in three different specialist areas. Today, more than 900 students (13% female) are enrolled in 13 full-time courses and three postgraduate programmes at the Skoda Academy.

The quality of training will be put to the test in the seventh Skoda student concept car project. 20 students from the academy are involved in the ambitious project this year. They have decided to design and build an open-top Spider version of the new compact Scala model.

2020 Sokda Student concept car

Watching and learning from the professionals
At a workshop in the Skoda Design department, the participants met the company’s Head Designer, Oliver Stefani, and put their first ideas down on paper with him and his team. The still-unnamed project car, which the students will be constructing according to the design, will be presented to the public in early June.

During the visit, they were allowed to watch Stefani and his team in their day-to-day work and to create their own drawings. “Despite the increasing use of computers and simulations, drawing is still an essential part of automotive designers’ work. With every stroke, an idea turns into something real. A sketch is the first of many steps on the long and exciting path to a new car,” explained Stefani.

Support from engineers
Throughout this project, the up-and-coming talent will receive support from engineers and experienced employees from the areas of technical development, design and production within the company. The apprentices have expressed a wish to make the car’s clear lines and emotive shapes more prominent in the spider version to emphasize the vehicle’s overall dynamics.

2020 Sokda Student concept car

“From the beginning, all the participants showed great enthusiasm and determination. Their sketches are very impressive, I really like the concept,” said Jiri Hadascok, exterior design coordinator at Skoda, adding that the professionals were impressed with their enthusiasm and receptiveness.

Skoda Scala
The Scala model which the students’ concept car is adapted from.

Designing a concept vehicle and then building it by hand is the highlight of all apprenticeships. “We are all delighted to be part of this project. As a student, where else do you get the chance to put your own ideas and vision into designing a car and then actually build it yourself? Drawing our first sketches was lots of fun, and we learned a lot from Oliver Stefani and his team,” said one of the participants, Vojtech Spitalsky.

StayAtHome

PISTON.MY

Interstate travel is not permitted during the period of the Movement Control Order (MCO). However, if you are on PLUS highways – and you should have a valid reason for travelling – and want to stop by at a R&R to pick up food or drinks, you should be aware that the shops are closed from today until March 31, 2020 when the MCO ends.

According to notices which appeared today on the PLUS Facebook pag, the closure of shops are at the following R&R locations in Peninsular Malaysia:

Gelang Patah, Machap, Ayer Keroh, Mambau, Ulu Bernam, Sg. Buloh, USJ and Penanti.

R&R
Operating hours at some R&Rs have been shortened to 6 am to 7 pm until March 31, 2020 (picture of R&R at Sg. Perak taken earlier in the year).

Additionally, at the other R&Rs, operating hours of the shops will be from 6 am to 7 pm. They are at:

Pagoh, Seremban, Dengkil, Tg. Malim, Tapah, Sg. Perak, G. Semanggol, Gurun and Rawang.

All stalls and shops at the lay-bys will also be closed from March 21 – 31, 2020.

However, the toilets, parking spaces and petrol stations will still be operational as normal. All suraus at PLUS R&Rs and the LPT2 are, however, closed during the MCO period.

PLUS has also closed all its reload facilities at the Toll Plaza Customer Service Centres and Reload lanes at both its Open and Close Toll highways.

The highway concessionaire explained that these actions of closure are social distancing efforts to  reduce the risk of infection and therefore limit virus transmission.

#StayAtHome

Petrol station
Reloading of TnG tollcards can be done at petrol station convenience stores such as BHPetrol’s Petromarts.

As such, PLUS advises motorists to plan their journey ahead by reloading their Touch‘nGo card at reload centres nationwide. The reload facilities include Self-Service Kiosks at 67 locations along selected rest and service areas, as well at ATMs of banks. Petrol stations and convenience stores can also provide reload services.

PISTON.MY

 

BHPetrol RON95 Euro4M

Real-world motorsports events all over the world, including world championships, have been cancelled or postponed because of the COVID-19 pandemic. But that doesn’t mean that there’s no racing going on – within the vast BMW Motorsport SIM Racing programme, no less than ten BMW drivers will fight for glory today.

The first-ever virtual round of the Nurburgring Endurance Series will start off at 1 pm European time (8 pm in Malaysia) with a 4-hour race in what is nicknamed the ‘Green Hell’. Among the more than 50 cars in the field that are split into four classes, there will be two BMW Z4 GT3s driven by BMW drivers. The race will be broadcast in livestream at www.vln.de.

Super Sim Saturday

“It is obviously a shame for us racing drivers to be at home instead of at the racetrack at the moment. As such, I am all the more delighted that sim racing is offering us the opportunity to still go racing,” said Martin Tomczyk, who will be in a Z4 GT3). “Personally, I am spending a lot of time in the simulator at the moment. I think holding the season-opener on the Nordschleife in a virtual environment, and in line with the original regulations, is a great idea. I am sure there will be a lot of well-known names on the grid.”

After this race, you can visit the YouTube channel of THE RACE in order to follow the second edition of the All-Star Esports Battle. Up to 60 pro racers will accept the challenge of sim racers, in order to determine the overall winner in the Grand Final from 8 pm (3 am Sunday in Malaysia). BMW i Andretti Motorsport driver Maximilian Gunther (GER) will return to this competition, after finishing second behind Max Verstappen (NED) in the very first Pro Race held last weekend.

Super Sim Saturday

Four MOTUL BMW M8 GTE cars will line up on the grid of the 90-minute IMSA Super Sebring race. With the classic Sebring 12 Hours (USA) being postponed, IMSA fans will now be treated to GTE action on the iRacing sim platform. In total, more than M8 GTEs have registered for the race which will start at 2:30 pm in America (2:30 am Sunday in Malaysia) which will be broadcast on the iRacing eSports Network on YouTube and Twitch.

BMW DTM driver Philipp Eng, who makes his debut in THE RACE All-Star Esports Battle, said: “I am very much looking forward to taking to the virtual racetrack with so many of my fellow professional racing drivers and sim racers. At the moment, the simulator is our only opportunity to go racing. I will prepare as well as possible and hope to be up there at the front of the field.”

#StayAtHome

PISTON.MY

Officially, under the Movement Control Order (MCO), unauthorised travel outside of homes is not permitted. However, it is still permissible to travel to get food and other supplies or medicines, but the journey must only be from home to the shop and back. No wandering around and if possible, only one person should go from each household.

Interstate travel is also forbidden unless a permit is given by the police (except for Selangor and Kuala Lumpur). Individuals can be fined RM1,000 or sentenced for up to 6 months in jail for not following the MCO, under the Prevention and Control of Infectious Diseases Act 1988.

However, in some areas, the police seem to have decided to tighten enforcement in a stronger effort to stop the spread of the COVID-19 coronavirus. In the case of Kuala Terengganu, Malaysiakini reports that all main roads into the town centre have been closed off. Free flow of traffic during the MCO period until March 31 will not be permitted except for those on duty and have legitimate reasons to enter.

PLUS

In Bentong, Temerloh, Kuantan, Pekan and Jerantut, petrol stations and convenience stores have been ordered to remain closed from 7 pm to 7 am although the MCO has mentioned that such places could remain open.

#StayAtHome

PISTON.MY

Archive

Follow us on Facebook

Follow us on YouTube