Piston.my

English

There’s something about American SUVs which gives them a certain authenticity. After all, it was in America that the original SUV was born and from the end of the 20th century, the rest of the world decided that they also liked SUVs. And just as with passenger cars, there are companies that specialise in customising SUVs for a small clientele.

One of them is MILITEM, an Italian company started by Hermes Cavarza, an entrepreneur from Milan with 40 years of automotive experience in the Gruppo CAVAUTO company (MILITEM is a brand of the company). Over the part 5 years, MILITEM has taken America models, specifically from RAM and Jeep, and given them more exclusive looks as well as Italian craftsmanship.

Extreme Utility Vehicle
The brand has been steadily expanding its reach beyond Italy and has just opened its first dealership in Germany. For this special occasion, MILITEM had the world premiere of a new model, the FEROX500 which it refers to as an EUV – Extreme Utility Vehicle. The FEROX500 tops out the range which has the FEROX, another SUV, and the FEROX-T pick-up.

The FEROX500, which started life as a Jeep Wrangler Rubicon 392, is the fifth model in the brand’s range. Priced ex-factory from 149,500 euros (about RM700,000), it comes with a typical American engine – the V8 HEMI with a displacement of 6417 cc and power output of 470 ps at 6,000 rpm, with 637 Nm of torque at 4.300rpm. That gives it supercar acceleration with a claimed 0 – 100 km/h time of 4.5 seconds.

2022 MILITEM FEROX500

75% of the massive torque is available at the low end of the rev range. To ensure that all of it reaches the road, there’s 4WD and the transmission is a robust, proven 8-speed automatic TorqueFlite unit. To maximise off-road capability, the adjustable suspension has been re-engineered by the MILITEM team.

Cylinder deactivation to save fuel
While the engine has a big displacement, owners can still bring fuel consumption down with  Fuel Saver technology in the engine management system. This deactivates half the cylinders when maximum power output is not required.

Fitted as standard are MILITEM Performance Shocks dampeners, which have separate twin gas and dual-effect hydraulics. The suspension is made of aluminium and coated in carbonfibre. The system also includes the Track Bar (torsion bar) that can be calibrated and is an efficient steering damper.

The black performance Dual Mode exhaust system was engineered in-house by MILITEM and is fitted with 4 tailpipes and valves. These can be activated via a dashboard button to match that sound to the setting and route taken.

2022 MILITEM FEROX500

The brake system is exclusive to the FERO500 and developed in collaboration with Powerbrake. It is one of the model’s strong features, with large slotted, semi-floating discs with radial expansion and contraction featuring 72 ventilation channels and a surface coating. The radial calipers are of turned aluminium machined from billets with internal fluid crossovers and 6 pistons crafted from stainless steel.

Completing the set-up are high-performance brake pads and aircraft- grade cables in low-expansion braided steel. In the rear, the brakes adopt 4-piston calipers, also with high-performance components and tubing in low-expansion braided steel.

Differentiation for a flagship
While sharing the same name as the rest of the range, the FEROX500 has been given unique features to distinguish it. While the ‘wide body’ design is common for all FEROX models, the bodywork of the FEROX500 has been enhanced with modifications to the front end and rear. There are more refined, colour-matched, chrome inserts but the elegant looks are balanced by the strong sporty edge.

2022 MILITEM FEROX500

Aesthetically, it is recognizable from the logo on its flanks and the spare wheel on the rear door is also omitted. This allowed the model to be completely redesigned, which saw the elimination of the airscoops too. The styling change has made the vehicle more elegant and modern than the original, while also improving rear visibility.

Facing forward, the carbonfibre grille in matt boasts a new Dual Colour with a black and red finish. This colour choice is also repeated in the cabin. The logo on the bonnet is all-black like the hooks, bonnet inserts and side grilles set behind the front wheelarches.

A more luxurious cabin
The cabin has been completely refurbished to be much more luxurious than the Wrangler. Much of the work is handcrafted with the materials and finish appropriate to the high status of the vehicle.

2022 MILITEM FEROX500

2022 MILITEM FEROX500

The seats have been redesigned by MILITEM and have a racing-derived shell shape, with integrated headrests. Hand-fitted nappa leather and ALCANTARA finish is in contrasting colours sporting MILITEM stitching. The leather finish can also be extended to the dashboard, instrument panel, steering wheel boss, gear knob, door panels and luggage compartment lining, pairing well with the carbonfibre and all-black inside.

With the same versatile characteristics of the Wrangler 392, the body-coloured hardtop comes in 3 sections to make it easier to remove. It is also possible to have an electric soft-top fitted, combined with removable rear windows for a wider panorama and a cabriolet drive.

2022 MILITEM FEROX500

Since the late 1990s when the laws on registering pick-up trucks changed and they could be registered for private use, many Malaysians have switched to such vehicles. For many, becoming a truck owner has introduced them to a whole new lifestyle where they can go far off the highway and explore our beautiful countryside.

The Ford Ranger and its more powerful brother, the Ranger Raptor, is among the popular trucks in the market, offering the convenience features of a passenger car and yet being ‘Built Ford Tough’ to be driven over any type of terrain.

Ford Ranger/Raptor Training Experience

The Ranger is certainly a very capable vehicle but not all owners (especially those coming from passenger cars) know how to make use of all its capability. Understanding this, Sime Darby Auto ConneXion (SDAC) organised a Ranger/Raptor Training Experience to provide them with the knowledge and skills to take their vehicle further.

The Ranger/Raptor Training Experience was held in Sepang, Selangor, on a specially prepared course which gave owners the chance to discover the full capabilities of their trucks. By tackling the challenging obstacles created around the course, the owners gained confidence to be able to pilot their vehicle safely in different types of terrain.

The session was part of the Ford Ranger Getaways program which is a community and experiential platform designed to provide owners with a unique experience of ‘Living the Ranger Life’  through a series of local adventures.

Ford Ranger/Raptor Training Experience

“This is a segment first in Malaysia where customers can make bookings via a digital platform. These specially curated outings aim to offer opportunities for customers, their friends and families to get together and build camaraderie with like-minded individuals while supporting domestic tourism that has been impacted by the pandemic,” said Turse Zuhair, Managing Director, Sime Darby Auto ConneXion-Ford.

Durian buffet coming up next

 In June, the Ford Ranger Getaways will offer an off-road durian adventure to Penang. The 2-in-1 off-road course will begin at Ford Juru outlet on the mainland side and the participants will then head to Jeti Batu Musang at Batu Kawan (also on the mainland). There, they will have the chance to test the limits of their Rangers across various obstacles, with guidance from a professional driving instructor. These include water-wading, jungle track driving, light rock climbing and more.

Ford Ranger/Raptor Training Experience

After the 4×4 experience, they will then head to Green Acres Orchard at Balik Pulau, a well-known spot for durians on the island. Following a short tour of the orchard, the participants can then kick back and savour the all-you-can-eat durian buffet and a hearty lunch. The getaway package is priced at RM976 per vehicle (Rangers only, of course) for a recommended maximum of 4 persons per vehicle.

There will also be other destinations for the Ford Ranger Getaways, designed to let owners and their friends experience 4×4 off-roading as well as have an adventure. There is also one special package which will put them behind the controls of an Airbus A320. No, it won’t be a real one, but the simulator is said to give a very realistic experience and the route programmed is over the virtual skies of Kuala Lumpur.

For those who want the real thing, another package lets them become a pilot for a day. They will be in the cockpit of a small aircraft with a professional pilot guiding them and can get an aerial view of the nation’s capital from around 500 metres up under the guidance of a professional pilot.

To find out more about the Ford Ranger Getaways and to make a booking, click here.

Car companies do their best to provide as much convenience as possible to customers and owners of their products. Whether it is enquiring about a new model or sending a vehicle for servicing, the more convenient it is, the better the experience of the brand.

For this reason, many companies have made their retail outlets 3S or 4S types, meaning sales, service and sale of spare parts are all at one location. ‘4S’ includes additional services such as accident repairs and refinishing. It is the norm these days and businessmen who wish to become dealers must be willing to make the big investments to build such facilities.

Volkswagen Passenger Cars Malaysia (VPCM) has followed this policy and can now say that virtually all its authorised dealerships in the country are now either 3S or 4S outlets, with the exception of one which is 2S (service and spares). There are currently 17 Volkswagen dealerships and one service partner, strategically located in key regions to provide customers with sales and aftersales services.

All dealer groups are equipped with the expertise, personnel and equipment to maintain Volkswagen models. In addition, VPCM is continuously working with its dealer partners to enhance customer satisfaction by providing professional, attentive, and top-level services. These efforts are evident in the Car.Advisor ratings given by customers. Car.Advisor is an independent third-party platform that manages customer satisfaction for the Volkswagen brand.

Volkswagen Malaysia has achieved an average 4.93/5 star for its sales experience on Car.Advisor, whilst aftersales services received 4.76/5 star (these annual results are as of April 2022). Ratings and reviews for each dealership are transparently shown on the website and accessible by the public.

Providing 3S and 4S outlets that offer the full range of services at one location is part of the company’s Volkswagen Cares initiative to enhance the ownership experience for customers. According to Erik Winter, Managing Director of VPCM, a smooth and memorable ownership experience is important. “Customer service makes all the difference because it elevates the ownership experience. Now with a strong network of 3S and 4S centres, we are providing convenience for Volkswagen owners from around the country. We are also practising transparency with our customer satisfaction because ratings and reviews are available on the Car.Advisor website, and this pushes us and our dealer partners to continue improving our offerings too,” he said.

Click here for more news and articles about Volkswagen.

Being at the right place and striking at the right time – that seems to have been the winning formula for the pair of Tengku Djan Ley and Mika Hakimi who drove to almost identical wins in both the races of the inaugural GAZOO Racing Vios Sprint Cup.

The Prima Pearl TD Racing duo finished of their race weekend at the Sepang International Circuit with a win in the second 1-hour race. While it was 18-year old Mika who had taken the chequered flag in the first race the day before, Tengku Djan – a 3-time Vios Challenge overall champion and Malaysia’s ‘Drift King’ – was at the wheel for the second win.

Toyota GR Vios Sprint Cup 2022

Unlike Race 1 on Saturday which was held in blistering heat, Race 2 got underway after being delayed twice to wait for a heavy downpour to subside. So conditions around the 5.543-km circuit were slippery and made things even more challenging.

Race 2’s grid was filled with 19 cars, with each car having two drivers. There was one car and crew more than Race 1 as Laser Motor Racing’s Eddie Liew/Putera Adam had not taken part due to a technical problem with their Vios.

Toyota GR Vios Sprint Cup 2022

Toyota GR Vios Sprint Cup 2022

To make the race more interesting, the reverse grid format was adopted and the winning pair started Race 2 in sixth position, plus weight penalties as well. On pole position was the Vios driven by the pair of Ady Rahimy and 16-year old Abdul Miqail, followed by Laser Motor racing’s Mark Darwin/Bradley Benedict Anthony, while in third position was Axle Motorsports’ Hayden Haikal/Naquib Azlan who finished fourth in Race 1. Starting from fourth on the grid was S&D Tama Motorsports’ Tom Goh/Freddie Ang, third placed winners the day before

Abdul Miqail got off to a great start but failed to hang on to his race lead when he spun off the wet track just as the race entered its second lap. That immediately promoted Naquib to race leader with Bradley, Nabil and Mika in close pursuit. Positions remained unchanged for 4 laps until Bradley misjudged his braking point, losing his position to Nabil and Mika.

Toyota GR Vios Sprint Cup 2022

Toyota GR Vios Sprint Cup 2022

The biggest gainer in the opening stages was Putera Adam who jumped 17 places from last position and into the lead by lap 7 of the race. The 16-year old drove a blistering pace and was among the last drivers to make the compulsory pit-stop for a driver change, handing the car over to his team mate for the remaining 30 minutes of the race.

With the driver changes completed, Eddie led the race 4.7 seconds ahead of Tengku Djan with Hayden, Boy and Mark rounding up the top 5 frontrunners. His lead however, diminished lap after lap as the pair of Tengku Djan and Boy lapped the circuit almost a second a lap quicker. By lap 14, the three drivers were abreast of each other and fighting for the lead.

The closing 3 laps were thus exciting and Tengku Djan used his experience and skills to move from third to first. It was a similar move as Mika did the previous day; once in front, his lead would grow from 1.3 seconds to 4.5 seconds by the time he took the chequered flag. Boy secured second place, with Hayden finishing third, Eddie in fourth position and fifth place going to the M7 Japan Project Team’s Fariqe Hairuman and Tarmimi Tahang.

Toyota GR Vios Sprint Cup 2022

“At the end of the day, it’s all about teamwork and both drivers must have similar pace, and only then will you have a fighting chance. Mika has been able to keep his cool throughout the race weekend and on top of that, he has the speed. We have to work as a team, there must be a sharing of knowledge, and you can’t do everything yourself,” said Tengku Djan.

UMW Toyota Motor President Ravindran K. said the GAZOO Racing Vios Sprint Cup and its format of a 1-hour race with a driver change certainly introduced new dynamics to the racing many of the drivers who are already competing in the Vios Challenge used to.

Toyota GR Vios Sprint Cup 2022

“As you know, UMW Toyota Motors’ foray into Malaysian motorsports began with the introduction of a street racing series. That has since evolved to include races on the half and full track length at the Sepang International Circuit; the organizing of a night race; the introduction of a program to develop young drivers and creating a Rookie Class; and even participation in the Sepang 1000KM Endurance Race last year as well as the running of the Vios Enduro Cup,” he said.

“These elements combined are in line with our efforts to contribute to not only growing interest in motorsports, but to make it even more exciting for both the participating teams and drivers, as well as spectators and enthusiasts,” Mr. Ravindran said.

The high temperatures caused much concern as race preparations started, the heat growing quickly and even the drivers needing to stay hydrated. Pirelli engineers were warning of tyre degradation and teams were figuring out how their drivers should manage the tyres and how many stops would work. All the drivers chose to start on softs, except Mercedes-AMG’s Lewis Hamilton who had medium compound tyres on his car.

Ferrari’s Charles Leclerc got off to a good clean start from his pole position, outrunning Red Bulls’ Max Verstappen to the first turn. However, Leclerc’s team mate, Carlos Sainz did not get a good start and the fumble allowed the other Red Bull, Sergio Perez to slip into third place.

Hamilton must have been counting on the tyres to help him get off the line fast and as he raced up to Sainz, the Spaniard suddenly pulled ahead and the Mercedes-AMG driver had to manoeuvre away. Problem was, Haas F1’s Kevin Magnussen was nearby and brushed into Hamilton’s car before heading into the gravel. But he managed to get back onto the track although Hamilton had a puncture and had to quickly get back to the pits. And that excitement was in just the second lap.

Hamilton’s car was then fitted with soft tyres and when he rejoined he was way down the field. There would be a lot of work ahead, and uncertainty as to how the Stewards would judge the incident with Magnussen. But his team mate, George Russell was doing great, having taken second by lap 10. He had gotten past Sainz who spun into the gravel, and was followed by Verstappen too. So the young British driver had two angry bulls coming after him as he chased after Leclerc who was 10 seconds ahead.

Verstappen passed Perez to go after Russell but on lap 14, Russell and Verstappen came into the pits and took on medium tyres. Both teams have skilled pit crews and got quick stops, with Russell able to get off faster. However, Verstappen had a frustrating problem which was that the DRS flap on his car could not open properly.

Lap 19 saw Perez coming in for mediums and when he rejoined, he was in fourth. With fresher tyres though, he would have more confidence to push harder if necessary but Verstappen was 7 seconds ahead at that time.

16 seconds behind Perez was Alfa Romeo’s Valtteri Bottas in fifth. He was not yet hassled by BWT Alpine’s Esteban Ocon who was busy trying to stay ahead of Sainz. Hamilton was way back in 16th, struggling to get through traffic. Even to get past Alfa Romeo’s Zhou GuanYu proved difficult as the Chinese driver managed to stay out of reach.

Leclerc was about 8 seconds ahead of Russell when he came in on lap 22 for his first stop. It took just 2.2 seconds from top to go again and when he rejoined, he still had a 5-second gap from the Mercedes-AMG driver. Russell was doing his best to keep his second place with Verstappen trying everything to get past. On lap 26, seeing how his angry team mate was struggling to overtake the Mercedes-AMG, Perez radioed to the team to ask Verstappen to back off and let him go after Russell instead.

And on the next lap, disaster struck the leader who was 12 seconds ahead… Leclerc’s car visibly slowed down and seemed to have lost power. He managed to get back to the pits but did not come out again, and his leading position was taken over by Russell. It was Leclerc’s first retirement of the season.

Since Perez wanted a go at Russell, Verstappen decided to go into the pits, switching from the mediums to softs. The Mexican Red Bull was eager to do battle with the British driver who was less than a second away.

With temperatures hitting almost 40 degrees C., many cars were coming in for tyre changes. With half the race completed, the Stewards informed Pierre Gasly’s Scuderia Alphatauri team that he was given a time penalty for an earlier collision with Aston Martin’s Lance Stroll. On the same lap, Zhou had to retire again, the second time in a row.

Russell put up a good fight but on lap 33, Perez outsmarted him and took over the lead. Now the Mercedes-AMG driver had to watch for Verstappen who was closing in from 6 seconds away. By then, Hamilton had moved up to sixth but some 44 seconds behind Verstappen.

Russell came in on lap 37 for new tyres and rejoined in third. Right after, Perez also came in which let Verstappen take over the lead. Russell was comfortably ahead of Bottas so he could concentrate on regaining his position. For the Dutchman though, the lead was unlikely to last till the end as his soft tyres were already 13 laps old.

On lap 43, drivers who were comfortably in points-collecting positions were Oc0n, McLaren’s Lando Norris, and BWT Alpine’s Fernando Alonso. Aston Martin’s Sebastian Vettel was also in the top 10 but when he dropped out for tyres, he rejoined down in 14th and that allowed Scuderia Alphatauri’s Yuki Tsunoda to move into 10th and get at least 1 point (if he could stay there till the end).

On lap 45, Verstappen finally came in to get the mediums; after 2.4 seconds of standing still, he rejoined and got in just ahead of Russell so it was 1-2 for the Red Bulls. Russell was 10 seconds behind, reasonably safe from Bottas who was 14 seconds away. He would get on the podium but which step would depend on whether the Red Bulls would get their bad luck again. Verstappen certainly wanted to win as it would then move him into the championship lead.

The gap between the two Red Bulls was less than 2 seconds when team orders came over the radios and Perez was told to move aside and let Verstappen take the lead since has quicker. He mumbled something about it being ‘unfair’ but obeyed the orders nonetheless, as he is expected to.

Russell decided to come in again and get new rubber, which allowed Bottas to move into third position. When the Brit rejoined, he was in fourth and just 3 seconds behind the Alfa Romeo. He had to watch out for Sainz, though, who was not far behind. It took 1 lap for Russell to regain his third position and as he was doing it, Perez also shot into the pits to get new tyres as a precaution in case he had to work harder in the closing stages.

Sainz and Hamilton began duelling on lap 60 and the Mercedes-AMG driver closed in on the main straight, then swept around on the outside to get past into fourth position… quite an impressive recovery from the back. Unlike Red Bull, the Mercedes-AMG team was unlikely to ask Russell to move aside and would instead just be praying that their two cars would make it through the remaining laps and collect a nice set of points.

With 2 laps remaining, Verstappen looked set to take the chequered flag, followed by his dutiful team mate across the line. Russell was also on the way to finish third but then Hamilton’s car had overheating problems and Sainz swept past on the second last lap.

And so it was a 1-2 for Red Bull but not 3-4 for Mercedes-AMG as Sainz took Hamilton’s place. Fortunately, the race ended as Bottas was coming up behind Hamilton.

 

 

 

 

While March saw a big surge in new vehicle sales to take the Total Industry Volume (TIV) past the 70,000-unit level, April’s TIV fell by 23% to 56,213 units of passenger and commercial vehicles.

The decline was attributed by the Malaysian Automotive Association (MAA) to the following reasons – 1) the ongoing global shortage of microchips as well as certain components and logistics delays, and 2) companies with their financial year ending in March put in maximum effort to close with the highest volume.

While the TIV for April 2021 was 4% higher, the cumulative volume after the first 4 months of this year is 8% higher, with 215,965 vehicles sold. This is made up of 140,905 units of passenger vehicles (excluding pick-up trucks) and 25,560 of commercial vehicles (including pick-up trucks).

Local production has, likewise, also been higher in the first 4 months of 2022, compared to the same period in 2021. The combined output from all the assembly plants was 208.894 units, 10,418 units more than in 2021.

The output in April was also higher this year, with 54,734 units produced, compared to 51,390 units in the same month last year.

Although May is a short working month due to the long holidays during the Hari Raya Aidilfitri period, the MAA expects that the TIV can be as high as April’s. Many companies still have a backlog of orders to fulfill and even if the market takes a ‘breather’, the numbers can still be high. Nevertheless, how many units that can actually deliver will depend on how many vehicles can be completed given the shortage of microchips.

Race starts at 3 pm in Spain/9 pm in Malaysia

After the inaugural Miami Grand Prix across the Atlantic Ocean, the Formula 1 teams are back at a more familiar battleground this weekend. It’s the Circuit de Barcelona-Catalunya where the Spanish Grand Prix, Round 6 of the 2022 Formula 1 World Championship, will be held. This 4.7-km track has been on the F1 calendar since 1991 although there has been a Spanish GP since 1951.

Like all other tracks since the first 2022 round, there will be a new set of challenges as the racing cars are of an all-new generation. Although there is data from a 3-day pre-season test at this same track in February, it is limited in value. During those test sessions, the teams concentrated on testing compounds in the middle of the range, rather than the hard tyres. Secondly, weather conditions were much cooler and things are expected to be different this weekend. Finally, the new cars were in their most basic launch specification; since then, they have moved on considerably and have upgrades. So there are unknowns that will have to be quickly analysed during practices.

The track itself is unchanged compared to last year, when Turn 10 was modified, slightly increasing the overall length of the circuit. It has a broad mix of corner types, so it puts every aspect of the car to the test. Overtaking is a challenge at this track and the pit straight is the only long one and is entered via a high-speed corner. This will be tough for cars to follow due to the dirty air, while the end of the straight isn’t a particularly heavy braking zone either. The modifications to Turn 10 means the corner is now taken at a faster speed and requires less braking.

The drivers use their brakes on only half of the 16 turns so the brake system is called into action for a total of under 13.5 seconds per lap, according to Brembo. All 5 of the hardest braking episodes in the Spanish GP are on the first 10 turns where maximum deceleration has an average value of 4.2g.

Cornering speeds and gears used by the Mercedes-AMG drivers at the Catalunya circuit this year.

Turn 5 is one of the track’s more unique corners, because drivers approach the corner differently depending on the session. The camber of the road drops at the apex, which unloads the inside-front tyre and increases the risk of lockups. Drivers will take a riskier, tighter line in Qualifying as it shortens the distance, but on a race stint, lock-ups can cause vibrations and damage the tyre, which could prompt an additional pit stop. So, they take a wider line to keep the load off the inside-front and reduce the potential of a lock-up.

Every element must be optimized on the F1 cars to avoid behavior that reduces overall performance. Usually, the focus is on the wings and the bodyshell, but other components also have a negative effect. One of these anomalies has been resolved by Brembo by introducing anti-drag to the brake calipers. This is a system that uses a torsional spring that reduces residual torque, ie the unwanted friction between the disc and the pad, even under extreme conditions. When the brake is not used, the lever keeps the two parts apart.

Michael Schumacher and Lewis Hamilton have had the most wins in the Spanish GP, with 6 to each driver. Among the present teams, Ferrari has had the most victories with 12 to its name, followed by McLaren (8), and Williams and Mercedes-AMG with 7 each.

‘CSL’ goes back over 50 years in BMW history, to the days of 1973 E9 3.0 CSL model. It was given the ‘CSL’ (Coupe Sport Leichtbau or Coupe Sport Lightweight) badge and was intended to be a homologation model for BMW to enter the European Touring Car Championship. The designation was not used much and in fact, the new M4 CSL is the third model that has ever had it (the second was the E46 M3 CSL in 2003).

Perhaps BMW has reserved it for very special occasions and there is a special one this year with BMW M GmbH celebrating its 50th birthday. The M4 CSL is a limited edition model which has made use of the company’s long expertise in powertrain and chassis development and also lightweight design.

2022 BMW M4 CSL

2022 BMW M4 CSL

The 1973 3.0 CSL

Strong focus on weight-saving
Lightweight design was one of the advantages of the 1973 3.0 CSL, allowing it to win championships and this is also a strong feature in the new M4 CSL. The M engineers have brought the M4 CSL’s kerb weight to 1,625 kgs for a power-to-weight ratio of 3 kgs/bhp. Compared to the M4 Competition, its weight is 100 kgs less and with a 40 bhp increase over the M4 Competition Coupe’s 550 bhp. Peak torque of 650 Nm, from 2,750rpm and sustained all the way up to 5,950 rpm.

One of the weight-cutting measures is very visible – no rear seats, so it’s strictly a 2-seater. The front M Carbon full bucket seats are also light (24 kgs than standard seats), and the absence of the rear seats saves 21 kgs. Not visible are chassis changes such as the use of lightweight M Carbon ceramic brakes and special light-alloy wheels, springs and struts which saved 21 kgs.

The use of CFRP in the body deducts 11 kgs; a titanium rear silencer cuts more than 4 kgs, and a further 4 kgs was saved from the kidney grille, rear lights, floor mats and climate control. Sound levels not likely to bother the driver, switching to ultra-lightweight sound insulation (which may be better or worse) saved around 15 kgs.

2022 BMW M4 CSL

The CFRP bootlid provides a 6.7 kg weight-saving. Its carbonfibre structure is visible inside through the unpainted clearcoat. It has a pronounced spoiler, referencing a similar feature of the 2003 BMW M3 CSL. The diffuser integrated into the rear apron and the exterior mirror caps are also made from CFRP.

The forged cross-spoke M light-alloy wheels have been designed exclusively for the new car and fitted with tyres size 275/35 ZR19 at the front, 285/30 ZR20 at the rear. The brake system has standard M Carbon ceramic brakes that are around 14.3 kgs lighter than the brakes on the M4 Competition Coupe. The rear silencer is made from titanium which reduces weight by 4.3 kgs compared to a conventional steel equivalent.

2022 BMW M4 CSL

Engine output raised
As mentioned earlier, the 3-litre 6-cylinder engine has an extra 40 bhp extracted from it and to get this, the engineers raised boost pressure from 24.7 psi to 30.5 psi. The 8-speed M Steptronic transmission with DriveLogic is said to be upgraded to match the higher power output while there are stiffer engine and transmission mounts.

2022 BMW M4 CSL

Like the M4 Competition Coupe, the M4 CSL has double-joint spring strut front axle and 5-link rear axle. Standard equipment includes adaptive M suspension with electronically-controlled dampers, electromechanical M Servotronic steering with variable ratio, and an M-specific version of the integrated braking system.

The suspension also has an 8 mm reduction in ride height (compared with the M4 Competition Coupe), lowering the centre of gravity. Auxiliary springs are fitted at both the front and rear axle and improve road contact in dynamic situations. The anti-roll bars at both axles and their mountings have also been specially engineered for this model.

2022 BMW M4 CSL

Advanced lighting technology

BMW Laserlight headlights (which illuminate in yellow rather than white) bring to mind the look of successful GT racing cars. The rear lights use an innovative technology making its debut in a production car. All light functions use LED units, while the covers have intricate light threads woven into them, illuminated using laser technology. The threads run parallel to one another before crossing over at the outer edges to create a stunning interpretation of the hallmark BMW L-shaped rear light contour.

2022 BMW M4 CSL

2022 BMW M4 CSL

Performance-focussed interior
The interior design is largely the same as the M4 Competition Coupe’s, which means it allows the driver to focus on performance. M-specific displays, ergonomically optimized controls with red accents, the M-specific gear selector and the anthracite-coloured headliner create a racing aura as the driver settles in. This is enhanced by the carbonfibre interior trim strip and ‘CSL’ badging below the head restraints, on the centre console and the rear panel.

2022 BMW M4 CSL

2022 BMW M4 CSL

The centre console of the new BMW M4 CSL is made entirely from CFRP, the material’s distinctive structure clearly visible around the gear selector and iDrive Controller. The use of carbonfibre more than halves the weight of the centre console, a saving of around 4 kgs. The M Alcantara steering wheel features a red 12 o’clock marker, carbonfibre inlays and CFRP shift paddles.

The BMW Head-Up Display is available as an option and part of the Ultimate Road Pack. It includes M-specific elements such as a colour tachometer, Shift Lights and M View. Provided as standard are M Drive Professional and M Laptimer for drivers to make improvements in their pursuit of the ideal line and faster lap times. For example, dramatic use of oversteer and opposite lock is recorded by the M Drift Analyser, while the laptimer records and show a variety of information on both the instrument cluster and the Head-Up Display. Drivers can also analyze the data in detail with the BMW M Laptimer iPhone app and share it with the online community.

Production will begin in July 2022 and only 1,000 units will be available, each priced from £128,820 (about RM706,000) in the UK market.

2022 BMW M4 CSL

The Bespoke department of Rolls-Royce already offers the ultimate in personalisation of the brand’s limousines and Cullinan SUV. Virtually every customer today uses the services of the Bespoke team in some way to add or create something special for their Rolls-Royce. But there is yet another level beyond Bespoke and that is Coachbuild. The department, re-established in 2021, brings back a lost art and science of making cars which goes back to the earliest years of the motorcar, before mass production began in factories.

“Our Coachbuild department is for those patrons who wish to go beyond the existing restraints, and explore the almost limitless possibilities this opens up for them. We are able to offer our customers the opportunity to create a motor car in which every single element is hand-built to their precise individual requirements, as befits our status as a true luxury house,” said Torsten Muller-Otvos, CEO of Rolls-Royce Motor Cars.

Rolls-Royce Boat Tail Coachbuilt No. 2 2022

The Sweptail, presented in 2017 as a demonstration of the coachbuilding expertise of Rolls-Royce attracted the attention of a number of customers. Within this group, it emerged that three potential customers shared a deep appreciation of contemporary nautical design. In consultation with the customers concerned, an agreement was reached whereby three cars –  to be known as Boat Tail – would share a common body, but each would then be individually, highly personalised, reflecting the confluence between vision, capability and ambition of the marque and each of the individual commissioning patrons.

Rolls-Royce Boat Tail Coachbuilt No. 2 2022
The second (of only three) Boat Tail comes one year after the first one which was unveiled in May last year (below).

2021 Rolls-Royce Boat Tail

The first Rolls-Royce Boat Tail was completed a year ago and the commissioning customers, who are a globally successful couple, were willing to let the world see their ultra-exclusive car. Their fascination of the Boat Tail form was furthered by a car in their private collection – a 1932 Rolls-Royce Boat Tail, lovingly restored by them, in time for their modern Boat Tail’s completion.

Now comes the next chapter of its Boat Tail coachbuilt commission and as will be the case with all  three cars, each will have a story entirely unique and personal to its owner, reflecting their own history, tastes and sensibilities. With this in mind, the latest Boat Tail, to be revealed at Concorso d’Eleganza, Villa d’Este 2022 on the shores of Lake Como in northern Italy, is a masterwork of restraint, sophistication, elegance and attention to detail.

Rolls-Royce Boat Tail Coachbuilt No. 2 2022

It was commissioned by a customer whose family business has grown from his father’s origins in the pearling industry. Widely travelled, internationally educated and cosmopolitan in his tastes and influences, the customer is an established patron of the arts, who additionally owns a sizeable collection of classic and modern cars, housed in a dedicated private museum.

A level of sophistication, garnered from the client’s extensive knowledge of luxury, is clearly. The overall design aesthetic is restrained; a study in carefully considered materials and precise details that together create a highly personal and emotionally resonant homage to the customer’s father.

Rolls-Royce Boat Tail Coachbuilt No. 2 2022

At the onset of the commissioning process, the customer presented Rolls-Royce Coachbuild designers with a selection of 4 pearl shells, personally chosen from his private collection for their unique colour and complexity. The shells provided inspiration for the exterior colour, which is one of the most complex Bespoke finishes ever created by Rolls-Royce.

The foundation of the colour is a shimmering blend of oyster and soft rose, with large white and bronze mica flakes adding a unique pearlescent quality that changes subtly under different light conditions. The contrasting cognac-coloured bonnet, created specifically for this Boat Tail, contains fine bronze and gold coloured aluminium mica flakes complete with a layer of crystal and iced matt clear coat, adding significant warmth and depth to the car’s appearance. The technical fibre lower sills of Boat Tail incorporate a rose gold woven thread.

Rolls-Royce Boat Tail Coachbuilt No. 2 2022

The rear deck, which houses Boat Tail’s unique ‘butterfly-design’ hosting suite, is swathed in Royal Walnut veneer, inlaid with rose gold-plated pinstripes with a satin-brushed finish to ensure a sensitive and sophisticated appearance. The Royal Walnut was specifically selected by the customer  for its beautiful properties as it matures over time, a material that will gradually transition to the tonal properties of the cognac colour. From above, one observes a harmonious balance and satin effect of the iced bonnet and tactile wooden rear deck, in contrast with the high-gloss front and side perspectives.

The interior is a beautifully curated combination of perfectly matched cognac and oyster-coloured leathers and Royal Walnut veneer, with rose gold and mother-of-pearl accents throughout. The leathers, complete with a pearlescent finish, accentuate the surfaces and forms of Boat Tail’s seats and interior design. The transmission tunnel is formed from Royal Walnut veneer with rose gold pinstripes, drawing a direct visual reference to the rear deck and adding a glowing warmth to Boat Tail’s interior.

The centrepiece of the dashboard is a timepiece made from mother-of-pearl, chosen and supplied by the client from his own collection. The fascia is pure and minimal in its appearance so as not to detract from the precious material. The same prised substance graces the control switches and instrument dials, creating a strong visual and material connection between the car, the owner, and his family heritage.

Rolls-Royce Boat Tail Coachbuilt No. 2 2022

Rolls-Royce Boat Tail Coachbuilt No. 2 2022

The Boat Tail is entirely hand-built, with the body panels fashioned from vast, single sheets of aluminium to create the distinctive outline inspired by the racing yachts of the early 20th century. From the front, the Pantheon Grille, milled from a single, solid billet of aluminium, is graced with a Spirit of Ecstasy fashioned in rose gold.

With the Architecture of Luxury – which includes a proprietary all-aluminium spaceframe chassis – the marque has ushered in a new coachbuilding movement that encompasses both highly sophisticated 21st Century technology and materials, and a tradition extending back more than 100 years.

One of two ultra-rare original 300 SLR Uhlenhaut Coupes from the Mercedes-Benz Classic Collection has been auctioned for 135 million euros – that’s equivalent to RM626,822,715 at today’s exchange rate – to a private collector. It’s the highest price ever paid for any car and the money will be used to establish a ‘Mercedes-Benz Fund’.

One of only two units
Only two units of the prototype sportscar were built and named after the chief engineer, Rudolf Uhlenhaut. Apart from its rarity, the 300 SLR Uhlenhaut Coupe is considered to be one of the finest examples of automotive engineering and design by automotive experts and enthusiasts worldwide.

1955 300 SLR Uhlenhaut Coupe

The auction was held at the Mercedes-Benz Museum and managed by renowned auctioneer RM Sotheby’s. The sportscar auctioned was part of the non-public vehicle collection belonging to Mercedes-Benz Classic, which has more than 1,100 automobiles ranging from the invention of the automobile in 1886 until today.

“The private buyer has agreed that the 300 SLR Uhlenhaut Coupe will remain accessible for public display on special occasions, while the second original 300 SLR Coupe remains in company ownership and will continue to be displayed at the Mercedes-Benz Museum in Stuttgart,“ said Marcus Breitschwerdt, Head of Mercedes Benz Heritage.

1955 300 SLR Uhlenhaut Coupe

Global scholarship programme
“The 300 SLR Uhlenhaut Coupes are milestones in sportscar development and key historical elements that have shaped our brand. The decision to sell one of these two unique sportscars was taken with very sound reasoning – to benefit a good cause. The proceeds from the auction will fund a global scholarship programme. With the ‘Mercedes-Benz Fund’, we would like to encourage a new generation to follow in Rudolf Uhlenhaut’s innovative footsteps and develop amazing new technologies, particularly those that support the critical goal of decarbonisation and resource preservation,” said Ola Kallenius, CEO of Mercedes-Benz Group AG.

“At the same time, achieving the highest price ever paid for a vehicle is extraordinary and humbling: A Mercedes-Benz is by far the most valuable car in the world,” he added.

1955 300 SLR Uhlenhaut Coupe

The proceeds from the auction will serve as seed capital for the global initiative, and Mercedes-Benz is committed to investing additional resources in the coming years. The Mercedes Benz Fund will be divided into two sub-categories: University Scholarships in order to connect, educate and encourage students to realize/conduct research on environmental science projects, and School Scholarships focussing on pupils to realize local environmental projects in their communities.

The programme funds will be directed to individuals who otherwise do not have the financial means for their projects and career paths. The programme will go beyond financially supporting the young people and include extracurricular elements like Mercedes-Benz mentorships opening up new career prospects.

Rudolf Uhlenhaut and his Coupe
The special circumstances behind its creation, its unique design and its innovative technology have endowed the 300 SLR Uhlenhaut Coupe with a remarkable level of mystique that endures to this day. The design set benchmarks that put it among the world’s most significant automotive icons – not least on account of its distinctive gullwing doors. Added to this is the outstanding performance delivered by its thoroughbred racing technology.

Serving as the head of passenger car development at Mercedes-Benz which included the racing division, Uhlenhaut was also the father of the 300 SL and the W 196 R “Silver Arrows”. The Coupe exceeded the technical possibilities of its time and became the pinnacle in the life’s work of the genius engineer who persistently strove for the maximum.

1955 300 SLR Uhlenhaut Coupe

Archive

Follow us on Facebook

Follow us on YouTube