Over at Edaran Tan Chong Motor (ETCM), opening of all its authorised Nissan showrooms will take place progressively from tomorrow (Friday, August 20). With the exception of a few outlets, all showrooms (branches and dealers) in Perlis, Penang, Perak, Kuala Lumpur, Putrajaya, Selangor, Negeri Sembilan, Pahang, Terengganu, Kelantan, Sabah, Sarawak, Labuan will open from tomorrow. Those that do not will do so by August 23. However, in Kedah, Melaka and Johor, the showrooms will still remain closed until further notice.
Peace-of-mind experience for customers
“ETCM adhere to strict standard operating procedures (SOP) ensuring the safety of its employees and a peace-of-mind experience for customers at all times. Only vaccinated employees including post-vaccine incubation period are allowed to resume work in Nissan showrooms. All employees will be wearing face mask, undergo frequent body temperature check, and regular disinfecting will be carried out at the showrooms including display and test drive vehicles, the company said in a statement today.
Customers are also advised to comply with SOPs when entering the premises; ensure full vaccination including post-vaccine incubation period, provide proof of digital certificate on MySejahtera, have a body temperature below 37.5°C and wear a face mask. Other SOPs set by the Government remain active.
Customers requiring more information can visit www.nissan.com.my or call the Nissan Customer Care Centre hotline at 1800-88-3838.
The original Datsun 240Z was one of the first Japanese models to show that Japan could also make sportscars and not just econocars. It certainly added another side to the Datsun brand (Nissan was not used as a brand name then) and drew enthusiasts to it. 50 years later, the seventh generation has now been revealed and retains the authenticity of a pure sportscar like the original.
The all-new Nissan Z – no more numbers that relate to engine size – was presented to the world online from New York, the same city where the 240Z made its world debut in October 1969. “When we introduced the Z in 1969, the Z was a revolution. Since then, for more than 50 years, Nissan has brought style, speed, reliability and so much more to millions of enthusiasts around the world,” said Ashwani Gupta, Representative Executive Officer and COO of Nissan.
Design shows lineage
As with the previous six generations, the new Z retains the same long-nose/short rear deck profile that was inspired by the classic British sportscars and also housed an in-line six. With the design theme for the exterior being ‘tradition with modern technology’, the designers looked to past generations to develop the fresh, sleek exterior design with an appearance that communicates respect to its lineage. “Ultimately, we created a Z that travels between the decades while being completely modern,” said Alfonso Albaisa, Global Head of Design at Nissan.
1971 Datsun 240Z
While maintaining the silhouette that pays homage to the first generation, the designers utilized the latest technologies to streamline the design, and incorporated LED lighting to give dimension without unnecessary elements. The LED headlights have two half-circles that take their inspiration from the Japan market-only 240ZG of the 1970s. Incidentally, for the original 240Z sold in America, the plastic covers for the headlights were not permitted due to regulations at that time.
The link to the original Z is most striking when viewing the new Z from the side. The roofline flows from the nose to the squared-off rear to create the distinctive familiar profile , whose rear edge was slightly lower than the front fender height giving the Z its unique posture. The signature transition from the rear quarter glass to the low-slung position of the rear tail adds to the effect.
The door handles are a flush-mounted design, and the rear hatch design is ultra-thin, yet with increased rigidity over the previous 370Z design. In the rear, the blister fenders smoothly direct flow air past the horizontal rear panel. The rear combination lamps incorporate modern technology into the design reminiscent of the Z32 300ZX (sold between 1990 and 1996), including new 3D signature LED taillights. The Z Performance grade also comes with a rear spoiler.
Only one engine choice
The early Z cars had straight six engines but V6 engines were used from 1984 when the 300ZX was launched, and the model has continued to use such engines to this day. The new Z gets the latest version of the V6 twin turbo engine (VR30DDT) but now with a 3-litre displacement instead of the 3.7 litres of the generation it replaces. There is, however, a significant boost in power output over the previous engine as this one produced up to 405 ps at 6,400 rpm and 475 Nm of torque from 1,600 to 5,600 rpm.
To increase output and to deliver sharp response, small-diameter turbochargers are used, as well as a turbo speed sensor to ensure the capabilities of the turbos are fully utilized (maximum spooling speed). The twin turbos balance power output and response time, while the use of an electronic variable valve timing (e-VVT) intake valve system ensures optimum response, constantly adjusting the intake valve timing to achieve excellent response and fuel efficiency in a variety of driving scenes.
6-speed manual or 9-speed automatic
Many of those who bought a 280ZX, introduced in the late 1970s, probably got it with a 5-speed manual transmission. For those who were lazy to shift, Nissan offered a 3-speed automatic transmission (yes… 3 speeds!). Transmission technologies have advanced over 4 decades and with the new Z, the driver gets a standard, 6-speed manual transmission. The close-ratio transmission includes an EXEDY high-performance clutch. In a first for a rear-wheel drive Nissan vehicle, Z Performance versions equipped with a manual transmission include an advanced launch assist control system that helps deliver smooth acceleration from a stopped position. There is also a carbonfibre composite driveshaft, with SynchroRev Match added to Performance versions.
You can also get an automatic transmission and this also has the launch control system. It’s a 9-speeder with a wide spread of gear ratios. Aluminium paddle shifters are standard, with unique paddle shifters, the same design as found on the GT-R (for Performance versions).
The engineering team tuned the chassis, cooling, suspension and steering to give the driver predictable and responsive handling. This required a multi-prong approach, especially for high-speed driving and cornering. Enhanced body rigidity, an electronic power steering with rack assist and a strong mechanical feel, and wider front tyres help increase maximum cornering g-forces up to 13%. The dampers use a new monotube shock absorber design with a larger diameter than the 370Z, resulting in an approximately 20% reduction in damping force to help minimize impact shock over uneven surfaces, enhance road-following performance and improve handling stability.
The front double-wishbone aluminium suspension features new geometry, including increased caster angle, improving straight line stability. A 2-point front strut tower brace is standard and the rear independent multi-link aluminium suspension has also been reconfigured with new settings.
Needless to say, disc brakes are fitted to all four wheels and all have ventilated rotors. Larger sport brakes with red-painted calipers are standard on Performance versions, while the Z Sport version rides on dark-painted 18-inch aluminium-alloy wheels with Yokohama ADVAN Sport high performance tyres. The Z Performance version has 19-inch RAYS super lightweight forged aluminium alloy wheels wrapped with Bridgestone Potenza S007 tyres.
Modern tech with a vintage touch
Sportscars like the Z have always had cabins designed to fit the occupants like a glove. The new Z will be no exception, and seamlessly blends modern technology with vintage Z touches. The centre stack takes inspiration from other generations before it, with three analogue pod gauges over the middle section to give that classic appearance. There’s an 8-inch touchscreen audio display to function as a command centre with numerous functions and interfacing with smartphones.
Ideal sportscar cabin
The interior design team also sought advice from professional motorsports racers to give the Z an ideal sportscar cabin. This can be seen in the instrumentation, with all vital information found in the 12.3-inch customizable digital meter display and arranged to help the driver grasp it at a glance. One example: the redline shift point is set at the 12 o’clock position.
The meter display is customizable in three modes. NORMAL mode offers a sporty feel with the centre area for navigation, audio and vehicle information. ENHANCED mode positions the tachometer and speedometer at the edges of the display, giving more space in the centre for a larger navigation map and information to be displayed. SPORT mode prioritizes the tachometer in the centre with a shift-up light at the top in the driver’s field of view. This mode also shows a boost gauge or g- meter, depending on what the driver prefers.
The design of the seats utilizes know-how from the GT-R’s development to enhance body support and grip. An expanded use of suede on the seatback suppresses initial lateral shake on the body, creating more comfortable drives, as well as reducing body movement when the vehicle is being cornered with ‘great enthusiasm’.
The early Z cars were pretty bare by today’s standards but then again, drivers probably didn’t care much about convenience features too. For today’s Z, times have changed and a wide range of convenience features comes as standard equipment. These include a Nissan Intelligent Key with Push Button Start, intelligent cruise control, automatic temperature control, auto-dimming rearview mirror, rearview Monitor, 12V power sockets, USB points (Type-C as well) and front and rear sonar sensors for parking guidance. Active Noise Cancellation and Active Sound Enhancement enhances listening pleasure from the audio system.
Proto Spec special edition
Nissan will offer a special edition which celebrates the distinctive Z Proto introduced in 2020. To be known as the Proto Spec, this will be limited to 240 units in the USA. It will have yellow-coloured brake calipers with the Z logo, bronze-coloured 19-inch RAYS wheels, exclusive shift lever knob (manual transmission only), exclusive Proto Spec leather-covered seats with yellow accents, exclusive Proto Spec suede + cloth door trim with yellow stitching and special Proto Spec interior stitching.
Pricing for the new sportscar is not announced yet but is expected to be around US$40,000 (about RM170,000) and the first units will be delivered to customers during the first quarter of 2022. You can expect that NISMO is already hard at work preparing high-performance versions.
In everyday driving, the brain has to be quick enough to analyse and get a driver to act correctly in any situation – millions of times on a journey. And that’s at a moderate speed too. For racing drivers, the demands are even greater as they travel at far higher speeds so they need quicker reactions and faster abilities to assess situations.
To help its Sebastien Buemi and Oliver Rowland, Nissan’s racing drivers in the all-electric Formula E series, the carmaker has developed an innovative program focused on brain function and anatomy research, training and development in the motorsport field.
Nissan Brain to Performance, as the program is called, uses advanced brain imaging and analysis to determine the anatomical specifics of high performance, professional drivers. The program aims to develop bespoke, optimized training to enhance the brain functions and anatomy related to driving and racing.
“At Nissan, we dare to do what others don’t. With this groundbreaking program, we aim to understand our racing drivers’ brain functions like never before and push the boundaries of on-track performance in Formula E,” said Tommaso Volpe, Nissan’s Global Motorsports Director. “What if, through advanced brain function analysis and training, we could help make our drivers perform better? Every tenth of a second counts in Formula E, so we’re excited to see how our cutting-edge Nissan research team can enhance the drivers’ already high-performing brain functionality.”
Better connection between people and vehicles
The program will be coordinated by Dr. Lucian Gheorghe, a leader in the field of brain analysis and training, and a driving force behind Nissan’s forward-looking research on how to better build the connection between people and Nissan vehicles. The immediate priority of the program is to enhance the performance of Nissan’s Formula E racers.
“Our brains are incredibly powerful. Without us realizing it, they perform a multitude of critical functions every second we drive our cars. Our highly trained and experienced Nissan Formula E drivers perform these functions under intense pressure and at great speed as they constantly search for faster lap times. Our new Nissan Brain to Performance program seeks to understand what it is about their brains’ electrical activity that enables them to do what they do,” said Dr. Gheorghe.
“If we can, we’d like to help them further improve their performance through bespoke brain training. In the future, could our cutting-edge research help improve the driving skills of the average driver, and inform the development of our road-going EVs? We hope so,” he explained.
The first stage of the new program will involve detailed analysis and testing of the Formula E racers’ brain functions, compared against a control group of ‘average’, non- racing drivers. All drivers will perform a range of tasks on state-of-the-art driving simulators while their brain activity is monitored and recorded. Based on the results, a bespoke driver training program involving electrical brain stimulation will be developed with the aim of improving driver performance.
Key research areas
To understanding how a Nissan Formula E drivers’ brain functions and anatomy differ in comparison to average drivers, the program establishes a spectrum of driver brain activity first. Attempts will be made to see if, through the use of electrical brain stimulation, a professional driver’s brain be enhanced to improve on-track performance.
The longer-term goal is related to future Nissan EV product development, with a focus on achieving the highest level of driver excitement and focus. An increased understanding of bio-electricity will further enhance the driving experience and intuitive nature of future EV operation.
The auto industry is accelerating towards electrification of products, ultimately leaving behind the combustion engine that has been blamed for causing pollution of the environment and bringing on climate change. However, unlike previous transitions, this one is a radical one that calls for a change in the ecosystem of the industry. The existing ecosystem has evolved over 100 years around the combustion engine and now, with electrification, manufacturing processes and supply chains need to be changed.
Different carmakers are taking different approaches and Nissan will make a total investment of £1 billion (about RM5.82 billion) in establishing a flagship Electric Vehicle (EV) Hub as a world-first EV manufacturing ecosystem. To be known as Nissan EV36Zero, the core of this hub will be at its 35-year old manufacturing complex at Sunderland in the United Kingdom.
The transformational project has Envision AESC, a global player in world-leading battery technology, and the Sunderland City Council as partners. Made up of three interconnected initiatives, Nissan EV36Zero brings together electric vehicles, renewable energy and battery production, setting a blueprint for the future of the automotive industry.
“This project comes as part of Nissan’s pioneering efforts to achieve carbon neutrality throughout the entire lifecycle of our products. Our comprehensive approach includes not only the development and production of EVs, but also the use of on-board batteries as energy storage and their reuse for secondary purposes,” said Nissan President & CEO, Makoto Uchida. “The experience and know-how gained through the project will be shared globally, enhancing Nissan’s global competitiveness.”
Building on Nissan’s historic presence in Sunderland, the projects represent 6,200 jobs at Nissan and its UK suppliers, including more than 900 new Nissan jobs and 750 new Envision AESC jobs at its new smart, low-carbon battery plant. Longer-term, the transformational project modernises and expands Nissan’s EV production capability in the UK.
Envision AESC will deploy integrated AIoT smart technology to monitor and optimize energy consumption, manufacturing and maintenance at its new gigafactory, enabling it to rapidly increase production and provide batteries to power up to 100,000 Nissan electric vehicles a year.
New-generation electric crossover
As part of the investment, Nissan will invest up to £423 million to produce a new-generation EV in the UK. Utilising the Alliance CMF-EV platform, it will be designed for global markets with forecasted production capacity of up to 100,000 units to be installed.
Next-generation EV batteries
Envision AESC already owns and operates Europe’s first battery plant in Sunderland, established in 2012 for the localisation of Nissan LEAF battery production. The factory’s UK team therefore has 9 years’ expertise of supplying batteries to the Nissan LEAF and eNV200, having produced enough cells, modules and packs to power over 180,000 electric vehicles in 44 countries, meeting global benchmark levels of quality, performance, safety, reliability and cost.
Supporting this new model allocation, Envision AESC will invest £450 million (about RM2.62 billion) to build the UK’s first gigafactory on the International Advanced Manufacturing Park, adjacent to the Nissan plant, powered by renewable energy and pioneering next-generation battery technology. This new plant will increase the cost-competitiveness of EV batteries produced in the UK, including through a new Gen5 battery cell with 30% more energy density which improves range and efficiency. It will also make batteries cheaper and EVs more accessible to a growing number of customers in the future.
Nissan LEAF battery pack.
Used battery packs have second life
There are also plans for a 1MW battery storage system using second-life Nissan EV/Envision AESC batteries, which will also allow for excess energy generated during daylight hours to be captured and used at another time, helping to balance demand on the grid.
During the 1970s, Japanese cars began to enter international motorsports events and their presence became increasingly noted as they won major events. One such event was the legendary East African Safari Rally, a tough dusty event that went around the Kenya countryside. As it was part of the World Rally Championship, major manufacturers took part and among them was Nissan, which used different models.
It was the iconic Datsun 240Z sportscar which won the 1971 event, driven by Edgar Herrmann with navigator Hans Schuller. To underline the superiority of the 240Z, two other cars finished in second and seventh positions. Furthermore, the victory represented the brand’s second consecutive victory in the rally. The sleek and low-slung 240Z was powered by a 2.4-litre straight-six engine, producing 210 ps.
The victorious car is on display today, having been fully restored in 2013. It is part of Nissan’s Heritage Collection which is housed in Zama, close to Nissan global headquarters in Japan.
Revealed on the first day of 2021 event
To commemorate the 50th anniversary of Nissan’s victory in the Safari Rally, the carmaker is preparing a Juke Rally Tribute Concept. These images are being released to coincide with the first day of the Safari Rally Kenya which sees the event once again being on the WRC calendar after an absence of 19 years.
The JUKE Rally Tribute Concept, as you can guess, is developed from a production Juke. It’s a very appropriate car to use with a raised stance, short front and rear overhangs strong potential off-road performance.
With enlarged wheels arches to accommodate the tailor-made off-road tyres, the vehicle’s stance is made more imposing, while the additional lights mounted on the bonnet and roof are reminiscent of the old rallycars. Back then, rallies were also run through the night so extra and powerful lighting was important. Two spare wheels are also visible at the back.
Colour themes reminiscent of 240Z rallycar
The JUKE Rally Tribute Concept’s black bonnet and black wheels are especially related to the 1971 240Z that competed in the RALLY. Those same cues also served as inspiration for the Gripz concept car which Nissan presented at Frankfurt Motor Show in 2015 which, in turn, influenced the design of the production Juke that was introduced in 2019.
A major difference under the bonnet is the type of powertrain used. While the rallycars of the 1970s had petrol engines, the Juke Rally Tribute Concept will have an electric hybrid powertrain. This is in support of Nissan’s commitment to the electrification of its range, especially in Europe.
“The Juke Rally Tribute Concept celebrates an iconic moment in Nissan’s heritage, with the participation and victory of the legendary 240Z in the East African Rally in 1971. As well as celebrating that victory, it reflects Nissan’s pioneering history in crossovers, striking design and electrified powertrains. We’re delighted to celebrate the 50th anniversary of the victory of that remarkable achievement with these striking images,” said Coralie Musy, Vice-President, Brand and Customer Experience, Nissan Automotive Europe.
The 2021 Safari Rally Kenya
The Safari Rally Kenya starts today as the sixth round of the 2021 World Rally Championship. It was to have been run last year but the pandemic forced its cancellation. Instead of the route of 6000 kms of open-road of yesteryear, the event will have 18 stages and a total of 320.19 competitive kilometres. But what remains unchanged is the dusty conditions (which could also be wet and muddy), rough terrain and high temperatures – and they will also see wildlife like the drivers in the 1970s. None of the WRC’s frontline drivers have experienced the Safari, which means ‘adventure’ in the Swahili language.
While systems like Proton’s GKUI, Ford’s SYNC and the Mercedes-Benz MBUX can intelligently communicate with you and help you with your motoring nowadays, cars have been ‘speaking’ to drivers for a long time. This has been in the form of clicks, beeps, bells or buzzers, with the earliest sound was probably the clicking of the signal lights.
As time went on, other warning sounds were added. For example, if a passenger does not put the seatbelt on, a sound of some sort will provide a reminder. Or when the fuel level gets too low, there will be a warning so the driver will start looking for a petrol station. Japanese cars, from the 1970s, even had a chime that would sound when the speed passed 100 km/h.
In most cars, there is a seatbelt warning light on the instrument panel and usually a sound to remind the occupants that their seatbelt is not on when the vehicle starts moving.
Higher quality warning and reminder sounds
The familiarity of the sounds can be important so that virtually any driver will recognise their meaning. At the same time, they need to be ‘right’ so that the driver will respond in the correct way. While most companies use generic sounds, Nissan has teamed up with experts at the Bandai Namco Group to develop in-car sounds for the latest and future Nissan models such as the Rogue, Pathfinder, Note and Qashqai.
The Bandai Namco Group is the entertainment company that developed videogame classics like Pac-Man and Tekken, and also the Gundam sci-fi military hobby items. Their expertise was called upon to help create a higher quality sound that uses pitch, tempo and tone to get information across. Ultimately, Nissan wants the ‘voice’ of its vehicles to have more personality and character.
Nissan is working with Bandai Namco, the creators of the Gundam characters and toys (and earlier, Pac-Man), to develop better sounds for use in future car models.
“We wanted to make it easier to understand the information in the car and provide an emotional tone so that people feel the Nissan brand,” said Hiroyuki Suzuki, Nissan’s lead engineer for in-car information sound design. “In game development, Bandai Namco’s sound creators develop sounds that simulate players’ intuitive understanding. We collaborated to create sounds that can help drivers have a similar intuitive understanding, in addition to creating sounds that will become synonymous with Nissan’s global models.”
Developing informational sounds
There is psychology involved in the design of informational sounds. And who knows better than the sound designers of videogames? “There are two types of sound in a game: one creates the world view of the story and express how it develops; the other is functional and absolutely vital for playing the game because they give you feedback or warn you of danger,” said Minamo Takahashi, the sound director at Bandai Namco Research Inc.
Latest Nissan Qashqai
Distinctly Nissan and functional
He notes that similar to gaming sounds, vehicle cabin alerts must convey important information without distracting the driver. But despite how realistic videogames have become, Takahashi said there is still a big difference to making sounds that work in the real world. Working with the Nissan team, he developed sounds that are both distinctly Nissan and functional.
“It was a very intense process,” he revealed. “We stayed for days in the studio, had various discussions and went through trial-and-error with Nissan people from the sound engineering, product planning, design, and testing divisions to find out what kind of sound is suitable for the Nissan brand.”
Once the tones were created in line with the brand’s image, the next step was to create variations of the tones according to the urgency and seriousness of the information being conveyed to the driver. As Nissan’s ergonomics test engineer Miwa Nakamura explains: “Research has shown that urgency depends on the frequency of the sound, and that severity depends on the frequency itself. In order to intuitively understand what types of sounds are used, each sound is divided into functional groups and differentiated by tone.”
Besides creating a new signature sound, Nissan engineers also had to consider the devices being used to emit cabin alerts. When they realized that the monotone devices commonly used would not emit the more layered tones that Bandai helped produce, they had to find a solution.
“There is a limit to the expressiveness of those devices, so we developed a new speaker,” said Hato Hiroshi, a Nissan expert of vehicle system design. A new high-quality speaker fits under the dashboard close to the driver and is optimized for the new information soundscape in Nissan cars, making the important warning sounds distinctive from the sound from the audio speakers.
Through the partnership, Nissan engineers were able to get a new perspective from sound creators who make videogames. Meanwhile, the gaming experts enjoyed a new application of sound design.
“When I got in a car and listened to the sound coming out, I felt the same way I felt when first playing a game I worked on,” said Bandai Namco’s Takahashi. “Even if the industry is different, that sense of accomplishment when you reach your goal is the same.”
With the exemption of sales tax extended till the end of 2021 (from its original date of June 30), car-buyers will be able to save money on their purchases. Besides enjoying these savings, they can also get special deals from Edaran Tan Chong Motor (ETCM) when purchasing new Nissan models.
The company’s latest Nissan ‘Great Rewards’ campaign offers sales tax savings, low monthly instalments with Flexi Financing program and accessories or maintenance packages.
For example, the latest Almera 1.0 Turbo now comes with an Urban accessories package worth up to RM5,500 and with the Flexi Financing offer, the instalment will be RM530 each month (terms and conditions apply).
There is also a new Special Civil Servants Promotion for the Almera 1.0 Turbo VL variant with a starting price from RM71,906.
Almera TurboNavara
Those who have want a more versatile and tough off-road capable vehicle can consider the latest Navara. The 4×4 2.5-litre Turbo Double-Cab Pick-up comes with many best-in-class technologies, including an array of Nissan Intelligent Mobility driver-assist features and safety systems. The monthly instalment for this model can be from RM960 using Flexi Financing.
Other Nissan models with special models are the X-Trail and Serena S-Hybrid. For the X-Trail, ETCM is offering an IMPUL or Aero Edition accessories package (worth up to RM5,600) and Flexi Financing that starts from RM1,020 monthly. The Serena S-Hybrid comes with 3 years of free scheduled maintenance and service with parts and labour included. Using Flexi Financing means the instalment can be RM1,080 monthly.
Serena S-Hybrid
As showrooms are presently closed, interested customers can visit the Nissan Flagship Store at Lazada where they can not only find out about the many models available but also make bookings for just RM250 to initiate the purchase process.
Other channels for information on Nissan products and services in Malaysia are the Nissan Online Showroom as well as the Nissan Customer Care Centre hotline 1800-88-3838.
Doing shopping online was already gaining popularity among Malaysians before the COVID-19 pandemic started. It offered convenience and an easier way to check out more choices, plus having the goods delivered right to your doorstep.
When the pandemic started and physical contact was discouraged to prevent the spread of the coronavirus, online shopping was already established and with the push by banks to get people to use electronic transactions, e-commerce boomed.
Even car companies started to use online channels as one of their marketing tools, expanding from just having websites that provided information to actually selling as well. Of course, this may not fully replace the personal experience of visiting a showroom, touching the vehicles and sitting in them and, of course, going for a test-drive.
What the online selling approach can do is to start the buying process without the customer having to travel to a showroom and take the process some way along before any physical contact may be necessary. In fact, some companies even offer test-drives if required by sending over the vehicle to the home or office.
Edaran Tan Chong Motor Sdn. Bhd. (ETCM) is among the companies that sees online shopping as the way to offer its customers a convenient and secure new Nissan vehicle purchasing experience. They can now do so at the Nissan Flagship Store on the Lazada e-commerce platform.
“We are excited to expand our Nissan models on Lazada, making it readily available to everyone who prefers the convenience of shopping at their fingertips. In this challenging time of COVID-19 pandemic, digitalisation has been fast-tracked and we are confident that this move is another way for the brand to enhance its services and at the same time offer great deals when purchasing a new Nissan on a digital application,” said Christopher Tan, ETCM Sales & Marketing Director.
The full range of Nissan models distributed by ETCM in Malaysia can be found at the Nissan Flagship store, including the latest Navara pick-up truck. ETCM may from time to time have special promotions exclusively for those who book online, saving money or getting extras with their purchase.
In conjunction with the opening of the Nissan Flagship Store, the first 55 customers who book the new Almera 1.0L Turbo, Navara, X-Trail or Serena S-Hybrid will receive a free Nescafe Coffee Machine worth RM 598. The booking fee starts from as low as RM250.
Other promotions available include an Urban accessories package (worth up to RM5,500) with the Almera Turbo and Flexi Financing from RM540 monthly. There’s also a Special Civil Servants Promotion for the model (VL variant) with a starting price from RM71,906.
The X-Trail comes with the IMPUL or Aero Edition accessories package worth up to RM5,600, while the Serena S-Hybrid comes with free maintenance service for the first 3 years of ownership, with parts and labour costs included.
Booking online is as easy as making other online purchases. You just select the model you want to purchase and add it to your cart (which would be a pretty big one!). You can choose a method of making payment for the booking fee and submit your details. A representative of ETCM will then contact you and provide assistance through the rest of the process.
Click here to visit the Nissan Flagship Store or you can also visit www.nissan.com.my for information on Nissan vehicles and services from ETCM in Malaysia.
Towards the end of March, we previewed the new Nissan Navara and at that time, Edaran Tan Chong Motor (ETCM) only showed one variant – the flagship Navara PRO-4X. But that is obviously not all there is to the range for the latest ‘Mothertrucker’, as ETCM nicknamed it. In fact, the range consists of 6 variants, all imported from Thailand in CBU (completely built-up) form with prices starting from RM91,900 and topping out at RM142,400 (for private registration in Peninsular Malaysia, excluding insurance).
Prices shown are for private registration and do not include insurance premiums.
The wide range is intended to cater to different budgets and usage requirements. While the Navara is usually advertised as a lifestyle machine for private use, it is also just as capable as a workhorse. However, those who buy it for business purposes are likely to use it in rough conditions and won’t care much for fancy features. All they want is a tough, well-built truck that can haul heavy loads and keeps running instead of spending downtime in a workshop. All variants of the new Nissan model come with a warranty of 5 years or 150,000 kms (whichever comes first).
For such commercial customers, ETCM offers two lower-priced variants with simpler equipment and 6-speed manual transmission, one of which is a single cab. While the 2.5-litre turbodiesel engine is the same for all variants, the one for these two variants has different tuning which produces an output of 163 ps/403 Nm. The engine for the other four variants produces 190 ps/450 Nm and all these variants have a 7-speed automatic transmission.
Apart from the bolder, more dominating appearance of the front end, the new Navara (except for the Single Cab) has a new rear Multilink Suspension with dual-rate coil springs that reduce body toss motion; Electronic Locking Rear Differential that allows the left and right wheels to rotate as a unit; Tailgate Assist that helps to lighten opening and closing operation; Integrated Rear Bumper Step that makes bed access easier; and acoustic laminated glass for the front windscreen and front windows to make things quieter in the cabin.
Like all modern pick-up trucks, active safety is comparable to what you get in a passenger car. There’s ABS with Electronic Brake Distribution and Brake Assist, Vehicle Dynamic Control and Traction Control, an Active Brake Limited Slip Differential, Hill Start Assist and Hill Descent Control. The last three systems would be especially useful during off-road driving.
For the Navara PRO-4X Auto, VL Auto and V Auto variants, active safety goes on step further with Nissan Intelligent Mobility advanced driver assistance features. These systems monitor the road ahead and warn the driver if there is a possible collision risk. If the driver fails to do the right thing – ie decelerate, brake or take avoiding action – then the computer will apply the brakes automatically to prevent the collision.
Other assistance features include an Intelligent Around View Monitor with Moving Object Detection and Off-Road Mode, Lane Departure Warning and Blind Spot Warning and Rear Cross Traffic Alert which helps during reversing out of a parking bay. And should a tyre lose air, the driver will be made aware of it, which can be useful when driving off-road.
For those who want to personalise their Navara further, ETCM has a range of exclusive factory-fitted accessories and they come with a 3-year/100,000 km warranty. There are four packages, ranging in price from RM3,200 to RM10,950, depending on the variant. The good thing is that this extra cost can be included in the total financing amount and repaid over the same number of years for the H-P loan. Incidentally, ETCM has a Flexi Financing promotion where the monthly instalment for the Navara Single Cab can start at RM670.
Visit www.nissan.com.my to locate an authorised Nissan showroom in Malaysia where you can view and test drive the new Navara.
Nissan’s GT-R has been around since 2007 and in that time, it has gone through many changes, evolving with updates and improved performance. This October will see another new version of the flagship GT-R NISMO, along with a special edition, being launched in Japan.
Both cars will be offered in the new, NISMO-exclusive NISMO Stealth Gray body colour, which was inspired by the tarmac of tracks that GT-Rs have set records and competed on.
Unpainted carbonfibre bonnet
The special edition will have a NISMO-exclusive clear-coated carbonfibre bonnet which is installed in place of a painted panel. This not only exposes the intricate carbonfibre weave but also takes 100 grams of weight away.
New logo used
The new GT-R NISMO will also have the new Nissan logo which has so far been used on the Ariya EV model. The logo will be set on the bootlid as well as the centre caps of each wheel, and also on top of the engine. The edition-exclusive 20-inch Rays aluminium forged wheels sport a red accent that matches existing accents around the body.
Continuing from the current GT-R NISMO, the large Brembo calipers and carbon ceramic rotors are the biggest ever fitted to a Japanese performance car – 410 mm in the front and 390 mm at the rear.
Race-proven technology
As Nissan’s ultimate performance car, the GT-R NISMO has continued to receive the best race-proven technology, drawing not just on NISMO’s expertise but also the experience of many cars competing in extreme racing conditions. The VR38DETT 3.8-litre twin turbo V6 with GT3 racecar-supplied turbochargers remains the heart of the GT-R’s drivetrain, rated at 600 ps.
The built-to-order GT-R NISMO special edition (pictured above) utilizes new high-precision, weight-balanced parts including the piston rings, connecting rods, crankshaft, flywheel, crank pulley and valve springs dialed in with tighter tolerances, delivering snappier revs and quicker turbo spooling. Each engine is handcrafted by its own takumi technician who places a takumi certification plate on the engine which is in an exclusive colour.
“The GT-R NISMO has always been an ongoing pursuit of ultimate driving pleasure,” said Hiroshi Tamura, Chief Product Specialist of the GT-R. “We take a holistic approach, seeking precision performance through a meticulous balance of engine components and shaving weight, and incrementally evolving the GT-R’s appearance to deliver the ultimate balance of power, performance and excitement to our customers.”
Tomica Happy Set : In collaboration with McDonald’s in Japan, a miniature Nissan GT-R NISMO will be available in the ‘Tomica Happy Set’, a popular McDonald’s meal for children. While adults have to wait for the actual car, the little ones can get their GT-R NISMO from the end of this month (for a limited time only).
