Piston.my

Latest News

Production of the previous generation of the Toyota Supra ended in 2002 and a follow-up generation did not appear till the launch of the GR Supra in 2019. Enthusiasts were naturally sad when Toyota had announced that Supra production would end, with no indication of whether it could be resumed.

All the units that were still on the road and still in good running condition were obviously cared for, with aftersales support continuing from Toyota dealers. Though it is not known how long Toyota continued to produce replacements parts for the earlier Supra models, some companies will do so for up to 10 years after last production of a model.

Well, it has been 17 years since the Supra (the A80 generation) was last produced so the carmaker would unlikely be making replacement parts. There would be other companies which may make certain parts but these would not be the same as Toyota Genuine Parts which have assured quality.

Toyota Heritage Parts project

Replacement parts for past two generations
Now Toyota has announced that it will reproduce replacement parts for the Supra A70 generation (produced between 1986 and 1983) as well as the A80 generation (1993 – 2002). The parts will be produced as a GR Heritage Parts Project and will be sold in Japan and selected overseas markets. Perhaps the GR Garage which is located at some Toyota dealerships in Malaysia will also offer (or at least take orders) for such parts.

At this time, the list of parts available are as follow:
A70 Supra – propeller shaft, door handle, fuel sender gauge, weather strip, front emblem

A80 Supra – headlamps, door handle, brake booster

Toyota Supra parts
Headlamps and propeller shafts are among the parts planned for reproduction.

Toyota wants to hear from you too
Retail sales were original scheduled to start in 2020 but Toyota says this may be postponed to 2021 due to manufacturing reasons. In the meantime, the carmaker also invites requests and suggestions for parts to be reproduced. A page on the Toyota GAZOO Racing website has a form to submit the requests (click here to go to the page).

Total production numbers for the two Supra generations are hard to come by but in as far as sales in North America were concerned, over 100,000 units of the A79 generation and around 12,000 units of the A80 generation were sold. The smaller number for the A80 Supra reflected the diminished interest in sportscars, especially coupes, during the 1990s as SUV popularity grew. This trend also influenced other carmakers to cease sportscar production as the numbers became economically unviable.

PISTON.MY

It’s not surprising that the all-new Chevrolet Corvette Stingray has been selected as the 2020 North American Car of the Year. This model, like the Ford Mustang, are icons of American sportscars and the latest generation has impressed with not only its revolutionary mid-engine design but also for its level of refinement and impressive performance.

The Corvette was previously honoured with this award in 1998 for the introduction of the fifth generation and again in 2014 for the introduction of the seventh generation.

2020 Chevrolet Corvette Stingray

“The 2020 Corvette represents a new era for the iconic brand,” said Lauren Fix, North American Car, Utility and Truck of the Year President, representing the 50-member jury. “The excitement from consumers has been overwhelming. From a journalist’s perspective, this is one of the best-built GM products that exemplifies what it means to be the North American Car of the Year.”

First award for Kia
The Kia Telluride was named 2020 North American Utility Vehicle of the Year, the first time Kia has received this award. The 3-row SUV has also received many other since arriving at dealerships in North America early last year.

Kia Telluride

The Telluride prevailed over a field of 12 semi-finalists and 3 finalists in the utility category. Since going on sale, nearly 60,000 units have been delivered. The model was conceived, designed, developed, and is built in the USA. It’s also the first Kia vehicle to be exported from the USA.

Awards program since 1994
The North American Car, Utility and Truck of the Year Awards honour excellence in innovation, design, safety, performance, technology, driver satisfaction and value. Founded in 1994 by Christopher Jensen, who also formed the first committee, the awards are judged by approximately 50 professional automotive journalists from the USA and Canada who work for independent magazines, television, radio, newspapers and industry websites.

To be eligible, vehicles must be all-new or substantially new and must be available at dealerships close to the announcement of the awards.  After evaluating the field of competitors, jurors vote individually by way of Deloitte to determine finalists and winners in each category.

PISTON.MY

 

It’s discount time again from Malaysia’s traffic police department. Following the incentive offered during Christmas, the police will be offering a 50% discount on compoundable fines for certain summonses.  As always, the discount is expected to encourage motorists to settle their summonses, and if they still don’t do so, they will be subject to blacklisting and a warrant of arrest could be issued.

The period that the discount will be offered is from January 18 to February 1, 2020. During the Christmas campaign, motorists had to go to the police station to make the payment and at the Traffic Police headquarters in Jalan Tun HS Lee, the queues were very long.

To reduce such inconvenience, the PDRM will accept e-payments via MyEG and Rilek.com.my. This approach benefits both sides – motorists don’t have to queue up for a long time and processing can be done by the police electronically. To use both MyEG and Rilek.com.my will first require registration (no charge) and then the various services can be accessed. Both portals have a service charge of RM2 for each transaction made.

Rilex MyEG

For MyEG, the PDRM-related services available are enquiries about outstanding summonses (you may discover some you never realized you had!), purchase of accident documents and payment of summonses. You can also register with MyEG for a service which alerts you if a summons has been issued for your vehicle.

Rilek.com.my, like MyEG, provides an easy facility for the public to check whether they have any outstanding summons and then make payments, if the offence is compoundable. Generally, offences for illegal parking or exceeding the speed limit have compoundable fines up to RM300. However, the ones relating to serious offences like accidents and which will be subject to court cases may not be compoundable.

PISTON.MY

With domestic market sales on the upswing, Proton is now giving attention to exports, which will be crucial for its future. Its products have been well accepted in neighbouring countries and can be exported duty-free under the provision of the AFTA agreement.

Following the launch of the Proton X70 in July last year, Pad Motors Sdn Bhd, the distributor for Proton in Brunei has received its first shipment of the updated Iriz, Saga and Persona models. Brunei is the first market outside Malaysia to begin selling these models and the distributor will be introducing them more actively with a roadshow starting on January 28.

Proton Brunei

Proton Brunei

Focus on growing export volume
After a successful 2019 saw the total sales volume grow by 55.7% – which Proton expects will place it in second overall position – the Malaysian carmaker is now looking to improve its performance in 2020 in export volumes.

“The export market will play an increasingly important role in growing Proton’s annual sales. When we updated the Proton Iriz, Persona, Exora and Saga last year, we did so while taking in to account the needs of markets outside of Malaysia and today, three of those cars are now available in Brunei. It’s a good start to 2020 but as the year progresses, we will be looking to export our cars to more countries,” said Dr. Li Chunrong, Proton’s CEO.

Proton
The Middle East is one of the regions where Proton is already exporting to.

Aiming for No.3 in ASEAN
Dr. Li added that Proton’s long-term intention is to be the best-selling brand in Malaysia and Number 3 in ASEAN by 2027. In order to meet the ASEAN target, export volumes will need to be boosted in coming years.

Aside from its updated models, Proton will also be looking to grow sales of the X70. With 2020 versions already leaving the production line at the Tanjung Malim (which has a new RM1.2 billion extension), the carmaker now has the option of expanding the footprint for its SUV which recently won the 18th Malaysia Cars of the Year overall award.

Proton Tg Malim 2019
With an additional investment of RM1.2 billion for an extension at the Tg. Malim factory in Perak, Proton can now plan for bigger export volumes in coming years.

“Exporting the Proton X70 will be critical for Proton’s future sales growth, especially in neighbouring ASEAN countries. It will spearhead the introduction of the next generation of Proton models currently being jointly developed with Geely and will lay the groundwork for the brand with customers in these markets,” added Dr Li Chunrong.

Visit www.proton.com.my to know more about the X70 and other models in the Proton range.

PISTON.MY

Some manufacturers believe that when a car has a small engine, say below 1.2 litres, fuel efficiency is already very good and there is no need for the added cost of a hybrid powertrain, not to mention extra weight. However, if fuel consumption can be improved further by adding an electric motor, why not?

This is how engineers at Fiat Chrysler Automobiles (FCA) see it and part of the reason why they developed FCA’s first city cars with new petrol Mild Hybrid technology. The technology combines the latest 3-cylinder FireFly 1-litre 70 bhp/92 Nm engine family with a 12-volt BSG (Belt-integrated Starter Generator) electric motor and a lithium battery pack.

Fiat Mild Hybrid Engine

Compared to the 1.2-litre 69 bhp Fire, the 77-kg Mild Hybrid version improves fuel efficiency, thus reducing carbon dioxide emissions by 30% on average, without sacrificing performance. The BSG system, allows for quiet, vibration-free restarting of the petrol engine in Stop&Start mode.

The BSG system is mounted directly on the engine and is operated by the belt that also drives the auxiliaries. The system recovers energy during braking and deceleration, stores it in the battery pack which has a capacity of 11 Ah. It can then use this energy, at a peak power of 3.6 kW, to restart the engine in Stop&Start mode and to assist it during acceleration.

Customers also benefit from all the advantages of going hybrid (the car is Euro 6D Final-compliant, for instance), which, depending on local regulations, include freedom of access and movement in European city centres, cheaper parking in town centres and tax breaks.

2020 Fiat 500 and Fiat Panda Hybrid

2020 Fiat 500 and Fiat Panda Hybrid

The first models to get the Mild Hybrid technology are the Fiat 500 and Fiat Panda, the two ‘souls’ of the Fiat brand for decades. The first, the more emotional one, is the pop, fashion and design icon. The second, the more functional, trendy one, with 5 doors. Sales will commence from February and March 2020, respectively.

Launch Editions for the first time
Furthermore, for the first time in the history of the two iconic and complementary Fiat brand models, the 500 and the Panda will be available in a special unique series: the exclusive ‘Launch Edition’. The special series can be recognized by the ‘Hybrid’ badge on the rear and the exclusive ‘H’ logo, formed by two dew drops, on the centre panel.

2020 Fiat Panda Hybrid

2020 Fiat 500 Hybrid

Dew – the symbol of the light of dawn and therefore of the beginning of a new era – has been used as inspiration for the new and exclusive ‘Dewdrop Green’ exterior finish that fits both cars like a bespoke suit, in perfect harmony with the themes of nature and innovation.

Pursuing a sustainable philosophy
On the inside, the seat upholstery is faithful to the sustainable philosophy of the entire project. The Launch Edition seats are the first in the automotive sector to be partly made with SEAQUAL YARN, the weaving of which produces a special material derived from recycled plastic. SEAQUAL YARN is produced by transforming plastics collected from the sea into flakes of polyethylene terephthalate. These flakes are then used in the yarn from which the fabrics are made.

2020 Fiat Panda Hybrid

2020 Fiat 500 and Fiat Panda Hybrid

2020 Fiat 500 and Fiat Panda Hybrid

Fiat is collaborating with SEAQUAL INITIATIVE to support ocean clean-ups to act against marine litter. The two Launch Edition models will therefore satisfy the customer who is just as attentive to aesthetics as to environmental issues, in terms of consumption and emissions.

Electrification of the brand
2020 also marks the new milestone in the history of the Fiat brand. With the launch of the new hybrid versions of the 500 and Panda, the electrification of the brand will begin, and will continue with the start of production in Turin of the new 500. This model will be 100% electric and therefore play a key role in the e-Mobility by FCA strategy.

2020 Fiat 500 and Fiat Panda Hybrid

PISTON.MY

Archive

Follow us on Facebook

Follow us on YouTube