Bentley Archives

Bentley aiming for a third record at Pikes Peak International Hill Climb this month with Continental GT3

Up till the 1980s, the Pikes Peak Hill Climb in the US state of Colorado was pretty much an American event, largely unknown to the rest of the world. The first run for the ‘Race to the Clouds’ was held in 1916 and thereafter, it became an annual event that saw new records being set every so often. Then in 1984, Audi showed up; as the era of the Group B super rallycars ended, Audi looked for other events where it could still enter its cars and the Pikes Peak Hillclimb was one of them.

French rally driver Michele Mouton came with the Audi Quattro and, within two years, was able to win overall as well as set a new course record. Other European teams also brought their powerful rallycars to Pikes Peak and the power game escalated. Even electric vehicles started to race up the hill, one of them from Mitsubishi Motors.

Two previous records
Bentley also saw the event as a good place to demonstrate the superior performance of its cars, especially to the US market which takes a lot of them each year. In 2018, it sent Rhys Millen in a Bentayga W12 up the 20-km route with 156 turns and the New Zealander set a new Production SUV record. The following year, Millen used a Continental GT and set the outright Production Car record.

This year, on June 27, Millen will again be racing up the hill and for this run, he has a Continental GT3. The car is now in final preparations which have included three dynamic test sessions and renewable fuel engine development.

Most extreme road-going Bentley
Regarded as ‘the most extreme road-going Bentley ever built’, the Pikes Peak racer will run on renewable fuel, initiating a R&D programme that aims to offer renewable fuels to Bentley customers in parallel to Bentley’s electrification programme. This two-strand strategy is set to maximise the pace of Bentley’s progress towards outright carbon neutrality, as part of its ‘Beyond100’ journey.

Upgraded twin-turbo V8 engine
From the start line at 2,834 metres, the course climbs to around 4,300 metres. As the altitude increases, the air becomes less dense, which has major implications in engine performance. The car’s engine – based on Bentley’s race-proven version of its 4-litre V8 road car engine – can cope with the reduced air density as it is turbocharged. It has been thoroughly reworked to generate more than 750 bhp/1,000 Nm at sea level for testing – and the engine will run even higher power levels for the race itself.

New pistons and conrods are installed to turn additional boost pressure (over 2.2 bar) into power, having to handle an increased dynamic pressure ratio. The carbonfibre intake manifold is thicker and reinforced versus the standard item, for the same reason. Custom, one-off Inconel exhaust manifolds have been 3D-printed via laser sintering by Abramovic, and lead to larger turbos paired with external wastegates, venting into very short exhausts and dedicated screamer pipes that exit behind the front wheels.

The high performance engine places additional demands on the cooling system and for Pikes Peak, the engineering team developed a secondary cooling system that’s installed at the back of the car. Air scoops replace the rear windows, and channel air through a secondary radiator that exhausts through ducts in the boot lid. The system runs via a dedicated secondary water pump.

RON98 eFuel
The engine runs on RON98 Renewable Racing Fuel. The fuel is a dedicated blend of advanced biofuels specifically designed for motorsport, and is a technological stepping stone to sustainably-created eFuel with a greenhouse gas reduction of up to 85%.

The gearbox is Bentley’s standard racing unit, already designed to handle the torque loads involved, but rear driveshaft diameter has been increased to provide additional durability. The gearbox runs a specially-formulated lubricant created specifically for the car by Mobil1, who have also supplied high-performance oil for the engine.

The chassis has been set up and tuned to suit the specific nature of the Pikes Peak course. Both front and rear axles run significantly reduced camber to the standard Continental GT3 setup, focusing the car on low-speed cornering performance. The softest springs and anti-roll bars from Bentley’s range have been fitted, to allow more movement in the body and so maximise weight transfer for braking. The brakes themselves are water-cooled, to handle the increased loads that an all-out attack on the course will bring.

Aerodynamic modifications
The aerodynamic modifications see a 30% increase in overall downforce at sea level, while maintaining the standard car’s aerodynamic front/rear balance – validated during the first track sessions. The biggest rear wing ever fitted to a Bentley dominates the rear of the car, sitting above a highly efficient rear diffuser that surrounds the transaxle gearbox. To maintain the aerodynamic balance front-to-rear, these devices are paired with a comprehensive front-end aerodynamic package comprising a two-plane front splitter flanked by separate dive planes. The majority of these parts were made with carbon nylon filament using rapid prototype, additive manufacturing techniques at the Bentley factory in Crewe.

To break the record, the car will have to complete the climb of around 1,500 metres at an average speed of more than 125 km/h to cross the finish line in less than 9 minutes and 36 seconds.

New Bentayga Speed now available in Malaysia

Building on a long tradition of Speed models that was born with the Continental GT in 2007, the Bentayga Speed maintains the performance credentials proven by its predecessor, which claimed the production SUV record at the gruelling Pikes Peak International Hill Climb in 2018.

The latest Bentayga Speed – the fastest SUV in the world – is now available in Malaysia, joining the other Bentley models offered by Bentley Kuala Lumpur. The handbuilt SUV has the vaunted W12 powertrain and many of the model’s luxurious features are standard, including the Mulliner Driving Specification.

Power, performance and agility
The new Bentayga Speed utilises the 6.0-litre W12 twin-turbocharged engine that delivers peak power of 635 ps/900 Nm, the full amount of torque generated from 1500 rpm and available to 5000 rpm. It gives the SUV a claimed maximum speed of 306 km/h, while the 0 – 100 km/h sprint can be done in 3.9 seconds.

2021 Bentayga Speed — *The 6-litre W12 engine accounts for 10% of the time taken to build a Bentayga Speed.*

While pursuing high performance, Bentley’s engineers have not forgotten the need to use fuel efficiently and also keep exhaust emissions down. To achieve this, the engine control unit can deactivate one complete bank of six cylinders as required. Switching between A and B Bank using information from the inlet and exhaust sensor, minimises cylinder and catalytic convertor cool-down and avoids spikes in exhaust emissions. This not only benefits CO2 emissions but also enables significant economy gains under part-throttle cruising conditions.

Four Drive Dynamics modes are available for the driver to use according to personal preference or conditions. Uniquely in the Speed, the Sport mode has been recalibrated to enhance response from the W12 engine and the 8-speed automatic transmission, together with the air suspension system and Bentley Dynamic Ride.

The Bentley Dynamic Ride is the world’s first electric active roll control technology that utilises a 48V system. This system instantly counteracts lateral rolling forces when cornering and ensures maximum tyre contact. Recalibration of Bentley’s Torque Vectoring by Brake system has made Bentayga Speed even more responsive.

The Bentayga Speed’s optional carbon ceramic brakes are the largest and most powerful brakes available from Bentley, with a maximum braking torque of 6,000 Nm and engineered to withstand temperatures up to 1,000 °C. They also provide a weight saving of more than 20 kgs over iron brakes.

Purposeful exterior
To complement the elevated levels of performance, the Bentayga Speed sports a purposeful exterior look. Dark-tint headlights, body-coloured side skirts, unique front and rear bumpers and a striking, elongated tailgate spoiler characterise the performance credentials. At the rear, the exhaust finishers are now the oval design that signifies a W12 powertrain.

Customers can choose from 17 standard paint colours, supplemented by a further 47 hues in the Extended and Mulliner ranges… with an additional 24 duo-tone options. If the customer still cannot find something appealing from these 88 choices, Bentley can have the bodywork colour-matched to any sample they provide. This exceptional range is complemented by a palette of 15 hide colours, 6 colour splits and 8 veneers with 2 technical finishes.

Dramatic design theme within
Inside, the Bentayga Speed has a dramatic design theme that balances luxury and performance. The unique Speed colour split is achieved through the use of dark colours enhanced by primary hide accents running throughout the seats and interior trim. Elegantly crafted ‘swooshes’ of contrast leather swipe around the doors, along the edges of the seat cushions and backrest bolsters, and on the lower console.

‘Speed’ seat embroidery on the backrest of all the seats is included as standard, and as a no-cost option, customers can choose to replace the ‘Speed’ embroidery with that of the Bentley logo.

A new contrast stitching design through the diamond quilting of the Mulliner Driving Specification (included as standard) is unique to Speed, with each of the stitch lines running through the quilting being split – one to match the leather, the other in the contrast colour.

There is also the option of the Black Specification, a striking package that replaces all exterior chrome work, bright detailing and some elements of the body with gloss black or carbonfibre versions. With this package, the standard roof spoiler is replaced with a curved carbonfibre version.

50% of sales tax exempted
The Bentayga Speed is priced from RM1,062,000 (excluding all taxes and insurance). With the recent announcement that the exemption of sales tax will continue till the end of 2021, there will be considerable savings with half of the applicable sales tax removed.

For now, viewing the Bentley Speed won’t be possible as the Bentley Kuala Lumpur showroom is closed during the FMCO period from June 1 – June 14, 2021.

How Bentley ensures the highest quality for its cars

Four Chassis Technologies That Give The New Bentley Continental GT Speed Its Superlative Driving Dynamics

Bentley declares the new Continental GT Speed Coupe and Convertible are the most dynamic road-going cars ever made by the company in its 102-year history. The superlative driving dynamics have not been achieved with any compromise to comfort or luxury, thanks to a combination of 4 chassis technologies.

The biggest brakes in the world
The first is the new carbon ceramic braking system with the largest brakes installed in any production car. Measuring 440 mm in diameter for the front discs, this latest generation of carbon-ceramic disc has been specially formulated to provide class-leading braking performance with copper-free brake friction material for reduced environmental impact.

The new ceramic brake system offers weight-saving of 33 kgs compared to the iron braking system, and most importantly, this is unsprung weight which lowers inertia and gives the car more responsive handling.

The ceramic brake has been extensively tested around the world including at the Nurburgring Nordschleife where it set levels of braking performance never before achieved by a Bentley. In objective tests, the ceramic brake has proven itself to be exceptionally fade resistant – after 10 consecutive applications from 80 mph (about 130 km/h), the stopping distance only increased by 1.1 metres, to just 61.1 metres.

Electronic All-Wheel Steering
A new Electronic All-Wheel Steering system enhances the dynamic nature of the car in each of the driving modes. This is even more apparent in SPORT mode, as the steering combines with Bentley Dynamic Ride and the electronic limited slip differential for a level of agility unlike any other Bentley road car, utilising up to 4° of steering lock on the rear wheels.

At low and medium speeds, the GT Speed’s rear wheels are steered in the opposite direction to the front wheels to aid a rapid change of direction, noticeably increasing the feeling of nimbleness. The steering feels sharper and with a quicker ratio, and a commensurate increase in steering feel provides even more driver confidence.

At high speeds, the rear wheels steer in the same direction as the front, to improve stability. The system is significantly more active on the GT Speed than it is on the Flying Spur, where its primary purpose is a reduction in turning circle and enhanced high-speed stability.

Electronic Limited-slip Differential
For the first time in a Bentley, the latest generation of the Continental GT Speed introduces the use of an electronic limited slip differential (eLSD). Specifically tuned hand-in-hand with the traction control and active chassis systems, the eLSD provides increased lateral capacity, improved longitudinal stability, enhanced on-throttle adjustability and delivers better traction in adverse road conditions.

In all modes, this provides improved traction, creating a greater level of confidence for the driver and makes the car feel more stable at high speeds. Improved cornering dynamics and the extra grip provided allows the driver to exit any corner with an increased level of precision and confidence. In turn, maximum performance can be extracted from the available traction for the strongest acceleration and composure from the apex. Torque distribution can vary across the powertrain according to the selected Drive Mode.

Advanced Electronic Stability Control
Finally, there is the advanced Electronic Stability Control (ESC) system which allows the driver to experience an even greater level of freedom before the GT Speed’s safety systems intervene to correct any anomalies. With the ESC system engaged, the car provides reassuring stability over uneven surfaces, abnormal cambers or in bad weather conditions. When switched to Dynamic mode, the ESC system allows an experienced driver to set and alter the cornering stance of the car at his discretion.

With the ESC switched off, the mechanical grip and inherent balance of the GT Speed comes to the fore, allowing a driver-focused experience previously only seen in Bentley’s racing machines. After utilising strong turn-in performance, thanks to the All-Wheel Steering and eLSD, the driver can choose to balance throttle and steering to deliver effortless, progressive yaw angles.

The Convertible (above), which made its debut last month, is the most driver-focused convertible of the Continental GT range and uses a revised version of renowned 6-litre W12 TSI engine which delivers 659 ps/900 Nm. It is fitted with a tailored, ‘Z-fold’ roof that can be deployed or stowed in just 19 seconds, transforming it from a luxurious coupe to an open-top Grand Tourer at the touch of a button.

FEATURE – The German engine that was born on a Japanese bullet-train

Most extreme roadcar-based Bentley to compete in Pikes Peak event on biofuel

Bentley is no stranger to the famous Pike Peak International Hill Climb event in the USA, have set records in previous years – the Production SUV record in 2018 with a Bentayga W12, and the outright Production Car record scored in 2019 with a Continental GT.

For this year’s event, to be run in late June, the carmaker will again compete in the ‘Race to the Clouds’ and the car it will enter will be the first competition Bentley to run on renewable fuel, ahead of a goal to offer sustainable fuels to Bentley’s customers around the world. It is related to a major new sustainability initiative with a renewable fuels research and development programme spearheaded by the most extreme roadcar-based Bentley in its 101-year history.

The modified Continental GT3 racer, based on Bentley’s race and championship-winning car, will power its way up the 19.99 km course running on a biofuel-based petrol. Various blends of fuels are currently being tested and evaluated, with possible Greenhouse Gas reductions of up to 85% over standard fossil fuel.

All-electric range by 2030
This first step marks the start of a longer programme that will investigate both biofuels and e-fuels for their potential to power the Bentleys of past and present in a sustainable way. Bentley’s ambitious and transformational Beyond100 programme aims to make the brand the world’s leading sustainable luxury mobility company, with the entire Bentley model range offered with hybrid variants by 2023 ahead of its entire range running only on electricity by 2030.

Combustion-engine Bentley models will still be produced for the next 9 years – and Bentley’s new project aims to make those cars as sustainable as possible through the use of innovative fuel technologies. With more than 80% of all the cars it has ever built still on the road, a genuinely sustainable and customer-facing renewable fuel offering will also allow customers to enjoy their current and classic Bentleys responsibly for years to come.

*At the 2018 Pikes Peak Hillclimb, Millen claimed the outright record for a production SUV with a Bentayga.*

“We are delighted to be returning to Pikes Peak for a third time – now powered by renewable fuel, as the launch project for another new element of our Beyond100 programme. Our powertrain engineers are already researching both biofuels and e-fuels for use by our customers alongside our electrification programme – with intermediate steps of adopting renewable fuels at the factory in Crewe and for our company fleet. In the meantime, the Continental GT3 Pikes Peak will show that renewable fuels can allow motorsport to continue in a responsible way, and hopefully it will capture the third and final record in our triple crown,” said Bentley’s Member of the Board for Engineering, Dr. Matthias Rabe.

Partnered by Fastr and M-Sport
The project is being run together with British Continental GT3 customer team Fastr, who have successfully campaigned their Bentley racing car in time attack competitions across the country. Technical teams from Bentley and Fastr are working together with specialists from M-Sport to extract the maximum possible performance from the Continental GT3 package.

156 corners at average speed of 125 km/h

To break the record, the car will have to complete the climb, which includes 156 corners, at an average speed of more than 125 km/h to cross the finish line in less than 9 minutes and 36 seconds. To help achieve this target will be 3-time Pikes Peak champion and former ‘King of the Mountain’ Rhys Millen who holds individual class records and who set Bentley’s two existing Pikes Peak records.

With the start line at 2,835 metres, the course climbs to almost 4,300 metres – where the air is 1/3 less dense than at sea level. The reduced air density will have implications on engine performance and the high speed the car must run at will also require a good aerodynamics package. It will have biggest rear wing ever fitted to a Bentley, sitting above a highly efficient rear diffuser that surrounds the transaxle gearbox. This rear aerodynamic package is balanced by a two-plane splitter at the front, flanked by separate dive planes.

2019 Bentley Continental GT Pikes Peak Edition — *The dashboard of the Limited Edition Pikes Peak Bentley Continental GT has a diagram of the mountain course with 156 corners.*

The engine is Bentley’s proven racing power unit, developed from the 4-litre turbo V8 fitted to the Continental GT V8. For the Continental GT3 Pikes Peak, engine modifications together with the use of carefully selected biofuel will ensure the engine develops significant horsepower despite the rarefied conditions it will operate in. Short side-exit exhausts will ensure the car sounds as dramatic as it looks.

Further modifications include cooling airscoops in place of the rear windows, and the obligatory stopwatch mounted to the roll cage next to the steering wheel to allow Millen to keep track of his progress up the mountain.

New Bentley Flying Spur V8 arrives in Malaysia, priced from RM839,000

At the uppermost end of the car market, ‘best’ is rather subjective and those who spend a million ringgit and more would consider that what they have purchased is ‘the best’. Nevertheless, each carmaker in that sector would present its car as being the best and Bentley declares its Flying Spur as ‘the best luxury sedan in the world’.

The Flying Spur is now available through the officially importers for Malaysia, Bentley Kuala Lumpur, and is available in both 4-seat or 5-seat configurations. The basic price starts from RM839,000 excluding taxes and registration, and a typical customer would obviously pay a higher price.

Driver-centric experience
While most Bentley customers in Malaysia are likely to be chauffeur-driven, the company’s research shows that an increasing number of its customers prefer to drive the car themselves. In fact, global research (including two customer clinics in America and China) indicated that over 40% of customers travel with rear seat passengers at least once a week.

For this reason, Bentley’s engineers focussed on offering a more driver-centric experience, with a class-leading portfolio of intelligent and intuitive equipment and technology tailored to the driver and also the passengers.

V8 that can become an I4
Under the bonnet is Bentley’s 4.0-litre, twin turbocharged V8 engine, an alternative choice to the iconic W12 unit. With turbocharging, it produces 550 ps/770 Nm with responsiveness and a top speed claimed to be 318 km/h.

When the driver is not blasting along at high speeds, the engine can save fuel by literally halving its displacement and running on 4 cylinders. It does this by shutting down one bank of cylinders under light-load conditions, when torque demand is below 235 Nm and the engine speed is below 3000 rpm.

The transition from V8 to what is essentially an inline four is imperceptible to the occupants and can be executed within 20 milliseconds (a tenth of the time it takes to blink). The result is savings of up to 16% in fuel consumption, allowing a longer range and less stops to refuel if driving very long distances.

Advanced chassis
The latest Flying Spur has powertrain and chassis advancements; Adaptive Air Suspension, Torque Vectoring by Brake, Drive Dynamics Control, and Electric Steering, all of which are standard features. The technically advanced, adaptive chassis can feature Bentley’s pioneering 48V electric active anti-roll control system (Bentley Dynamic Ride) and Electronic All-Wheel Steering are available as options.

Recognisable as a Bentley
The bold exterior design is new and modern but still recognisable as a Bentley. It has increased road presence and stronger, more muscular lines that sweep the full length of the car. Compared to the second generation, the latest one has a wheelbase that is 130 mm longer, benefitting interior space and comfort.

For the Flying Spur V8, there are seven Bentley paint finishes to choose from and for those who want even more exclusivity, there is an extended range of over 60 colours, including Mulliner and personal commission.

Cabin with fine materials and craftsmanship
The interior has comfortable, spacious seats available in 5 hide colours, with Bentley’s ‘Wing’ theme across the lower console and fascia. Sweeping horizontal veneer flows across the dashboard and into the doors, emphasising the spacious width of the cabin. Besides Crown Cut Walnut as standard, there are 7 other veneers to choose from, plus a High Gloss Carbonfibre technical finish.

The industry-first Bentley Rotating Display is also available on the new Flying Spur V8. When the engine start button is pressed, the veneer section in the middle of the dashboard rotates to reveal a 12.3-inch touchscreen, displaying three, customisable digital tiles. The second side of the display reveals three elegant analogue dials showing outside temperature, a compass and a chronometer. A complete digital detox can be selected on the third side, to simply enjoy the seamless wood veneer fascia continuing around the cabin.

Needless to say, the range of equipment is extensive and can be supplemented with options like Rear Seat Entertainment tablets, Naim for Bentley audio system and even the luxury of an onboard 2-bottle drinks cooler. A completely new design means that the cooler is packaged into a much smaller space than the previous generation of the Flying Spur, resulting in less intrusion into the 420-litre boot space.

Only electric power for Bentley vehicles by the end of this decade

2021 Bentley Continental GT Speed

Bentley Motors has revealed details of its new Continental GT Speed which will go on sale in mid-2021 and be the flagship of the Continental GT range. Presented as ‘the most dynamic road car in Bentley’s 101-year history and ultimate performance-focused interpretation of the world’s benchmark luxury Grand Tourer’, the new Continental GT builds on a long tradition of Speed variants, starting with the original in 2007. That first generation itself was inspired by the 3-Litre Speed models of the 1920s.

“The world’s most luxurious Grand Tourer is now truly more capable than ever before, with a new sportier edge which will appeal to performance-focused drivers,” declares Dr. Matthias Rabe, Member of the Board for Engineering at Bentley Motors. “The Speed is the latest chapter in the Continental GT story, helping Bentley customers to create their own extraordinary journeys.”

New chassis technology
The pinnacle performance Continental GT features advanced chassis technology that includes a new Electronic All-Wheel Steering system and an electronic limited slip differential (eLSD) for a level of agility said to be unlike any other Bentley road car. The system is significantly more active on the GT Speed than it is on the Flying Spur, where its primary purpose is a reduction in turning circle and enhanced high-speed stability.

For the Active All-Wheel drive system, the traction control and torque distribution has been recalibrated in all driver modes to provide a noticeable character shift relative to the standard Continental GT. Maintaining Bentley’s philosophy of the vehicle feeling progressive and secure, yet still be dynamic, this approach rewards drivers of all abilities. To achieve this philosophy in BENTLEY and COMFORT mode, overall grip is balanced between the front and rear wheels; in SPORT, this mode has been calibrated with a more rear-biased torque–split in all driving scenarios.

Improved cornering dynamics and the extra grip provided by the new systems allows the driver to exit any corner with an increased level of precision and confidence. In turn, the car is able to extract the maximum performance from the available traction for powerful acceleration with composure from the apex.

Working alongside these systems are the key chassis technologies that deliver body control and ride comfort with no compromise to one another – namely Bentley’s 3-chamber active air suspension with adaptive damping, and Bentley Dynamic Ride – the 48V active anti-roll control system that Bentley pioneered on the Bentayga and third-generation Continental GT.

Depending on the mode, the Electronic Stability Control (ESC) System allows the driver to experience an even greater level of freedom before the Speed’s safety systems intervene to correct any anomalies. When switched to Dynamic mode, the ESC extends the freedom of the driver, allowing an experienced pilot to set and alter the cornering stance of the car at their discretion.

ESC can also be switched off, allowing a driver-focused experience previously only seen in Bentley’s racing machines. After utilising strong turn-in performance on-track, thanks to the All-Wheel Steering and eLSD, the driver can choose to balance throttle and steering to deliver effortless, progressive yaw angles.

To complement the extra capability of the chassis, a newly-engineered Carbon Ceramic brake system has been introduced as an option on the GT Speed. The carbon ceramic material saves over 33 kgs of weight (all of it un-sprung mass) and produces extremely low levels of brake dust.

659 ps W12 TSI engine
The new GT Speed is equipped with an uprated version of Bentley’s 6-litre W12 TSI engine, delivering 659 ps – a 4% increase (24 ps) over the current W12 model – whilst maintaining a massive 900 Nm of torque. Factory testing shows a top speed capability of 335 km/h) and 0-100 km/h time of 3.6 seconds. The dual-clutch, 8-speed transmission shift is twice as fast in SPORT mode as in the standard W12 model.

During the journey, the Variable Displacement system can shut down half of the engine’s 12 cylinders under certain conditions, with the transitions between the two being imperceptible. Intake and exhaust valves, fuel injection and ignition are all shut down on defined cylinders, with the engine running as a 6-cylinder for improved fuel efficiency.

Unique and luxurious cabin
The 4-person cabin of the new Continental GT Speed showcases Bentley’s expertise in creating the world’s finest automotive interiors. Handcrafted materials blend with unique trim and badging that are only available in the Speed and can be further personalised if desired. Bentley’s Diamond in Diamond quilting is included as standard, and Speed embroidered headrests distinguish the cabin of the most potent Continental.

The interior can be further personalised with a choice of 15 main and 11 secondary hide colours, as well as the use of leather in lieu of Alcantara for the Speed colour split. The centre console can be finished in new dark tint engine turned aluminium, bringing a geometrically perfect machined surface and a beautifully patterned finish. GT.

Click here for other news and articles about Bentley.

FEATURE – The German engine that was born on a Japanese bullet-train

The most common engine layout is the in-line arrangement with the cylinders next to each other in a row. Many people would also be familiar with the vee layout, and Subaru owners would know their engine has a horizontally-opposed arrangement of cylinders. But most motorists would not be familiar with the ‘W’ which is prominently featured in Bugatti and Bentley models.

The initial W engine was conceived in 1997 in an unlikely place far from Germany – a Shinkansen bullet-train running between Tokyo and Nagoya in Japan. Then-Volkswagen CEO, Ferdinand Piech, had been having a conversation with Karl-Heinz Neumann, then head of powertrain development at Volkswagen, and sketched out an idea on an envelope on the fold-out table behind each train seat.

*The sketch by Ferdinand Piech on the back of an envelope which gave birth to the W engine.*

The idea had been in his head for some time and was something like a modular concept. The 6-cylinder VR6 engine was in wide use by Volkswagen by the mid-1990s; its uniquely offset cylinder banks made it compact enough to fit transversely even in small cars like the Golf. By marrying two of the relatively narrow engines in a further vee, a compact 12-cylinder could be made. The offset cylinders of the merged VR6 engines formed a ‘W’.

But what also emerged during the train ride was even more emblematic of the person who drew it: a massive 18-cylinder engine comprising three VR6 engines, configured in a tilted double-W shape. Springing from the back-of-the-envelope sketch into the real world, the W18 was a naturally aspirated 555 bhp, 6.25-litre powerhouse.

Piech was spearheading a growth movement as CEO of Volkswagen AG in the 1990s. As part of that movement, he was seeking a high-end, luxury brand to bring into the fold. Enter Bugatti which Piech’s son had recently insisted his father purchase a model of a Bugatti Type 57SC Atlantic for him, so the company was on his mind… and it also happened to be for sale. “An amusing stroke of fate,” he would write later in his autobiography.

In 1998. Volkswagen acquired the French car company which had been founded 89 years earlier. Piech immediately set about his goal of restoring Bugatti’s standing as producer of elite, state-of-the-art cars, and the new W18 engine found just the right place to make its debut.

With the aid of automotive designer Giorgetto Giugiaro of Italdesign, the Bugatti EB 118 design prototype was developed within a few short months. With its W18 engine mounted up front, the EB 118 debuted at the 1998 Paris Motor Show. Other concepts followed and by 2000, Piech announced that Bugatti would be launching a car that would be ‘the most exciting, innovative, and unprecedented of all time’. It would have 1,000 metric horsepower, break 250 miles per hour (400 km/h), and accelerate from 0 – 100 km/h in less than 3 seconds.

*Bugatti Veyron showcased the production W engine to the world.*

The Veyron, as the supercar would be known, would need to go through some revisions and refinement on the way to becoming a production model. The most dramatic of these was to its engine; a 2001 concept model, the EB 16:4 Veyron, had a W16 engine—essentially, two V8s joined at a 90-degree angle. Thanks to the W16 cylinder banks being separated at a 15-degree angle, the engine was compact enough to allow for the use of 4 turbochargers (the ‘4’ in ‘16:4’). The stats for the production Veyron were as staggering as promised: 8 litres, quad-turbocharged W16 engine with 987 bhp and 1,250 Nm of torque, 0 – 100 km/h in less than 3 seconds, and a top speed of more than 400 km/h. Succeeding Veyron models would eclipse even those numbers.

*W12 engine in the Bentley Continental GT (above) and Audi A8 (below).*

Of course, the W18 and W16 engines weren’t the only Volkswagen efforts to bring W engines to the road. Back in 1997, as Piech was sketching out what would become the W18, he and Giugiaro were also talking about a concept that Piech hoped would become a Volkswagen supercar, featuring a W12 engine. The W12 Syncro debuted the W engine to the world at the 1997 Tokyo Motor Show, with a W12 Roadster appearing at the 1998 Geneva Motor Show.

The best known W12 concept, however, was the Nardo. Revealed in 2001, the W12 Nardo had a 6-speed manual transmission that sent the 591 bhp from the 6-litre W12 engine to the rear wheels. However, this Volkswagen supercar never materialized in production form although the W engines did appear in some models.

*2001 Volkswagen Nardo prototype with W12 engine.*

2002 Volkswagen W8 Passat — *The rare Volkswagen Passat with a W8 engine which was sold in the early 2000s.*

From 2001 to 2004, a W8 engine was available as an option in the Passat and this particular variant is rare today, sought after by enthusiasts. The W12 saw production in the Phaeton and Touareg, as well as the Audi A8 and in a new generation of Bentley models from 2003 onwards. Spyker also bought a batch of W engines for use in some of its sportscars.

No replacement for displacement? Isuzu destroys that perception!

80,000 Bentley Continentals delivered in 18 years

The Continental model line has a special place in Bentley’s history, having begun in 1952 with the R-Type Continental. This was a Mulliner-bodied coupe with a top speed of just under 195 km/h. It was the fastest 4-seater car in the world during that period of the 1950s, and very quickly earned a reputation as the ultimate in high-speed luxury.

In 2003, the Continental GT was launched – the first car of the modern Bentley era. Inspired by the R-Type, the first Continental GT established an entirely new market segment – the modern luxury Grand Tourer. Ever since, an average of nearly 5,000 examples have been delivered to customers around the world each year.

This year, after 18 years, the Bentley factory in England produced the 80,000th Continental GT. It should be noted that every Continental GT has been customised, meaning there are 80,000 very individual examples of the car. The 80,000^th unit was a right-hand drive Continental GT V8 in Orange Flame and it was completed earlier this week.

“At its launch in 2003, Bentley redefined the modern grand tourer with the revolutionary Continental GT. Now in 2021, the GT continues to be the ultimate luxury grand tourer, encompassing the latest technology, performance and style. This success is a testament to the skills of our designers, engineers and craftspeople here in Crewe,” said Bentley’s Chairman & CEO, Adrian Hallmark.

Many of the skilled craftspeople will have worked on the very first example of the Continental GT (still owned by Bentley). Over this period, the style, technology and engineering beneath the car has evolved significantly, seeing an increase of up to 27% in peak power, whilst models within the range have also achieved a reduction over the original Continental GT of 48% in CO₂ emissions.

The platform beneath the car was upgraded to a Bentley design for the third generation, allowing a totally new stance, proportions and levels of dynamic ability that raised the bar again. Wrapped in a totally new bodywork design, with sharper lines and more flowing surfaces, the Continental GT remains a stylish and thoroughly contemporary grand tourer.

With a choice of powertrains, one of the most extensive colour palettes in the world and with almost limitless interior options, unique configurations can run into billions of variations. Bentley suggests that there are currently a total of 17 billion ways in which a customer can personalise his or her Continental GT.

Beyond that there are also the services of Bentley Mulliner – the company’s in-house bespoke division – which will make the requirements of each customer a reality. Apart from safety aspects, there are no limitations to what can be done for the customer.

To mark the production milestone, Bentley drew on its heritage fleet to show the evolution and achievements of the Continental GT since 2003. These included the very first production unit, still a taxed-and-tested car on Bentley’s fleet, a Continental Supersports coupe, considered by many to be the pinnacle of the first-generation GT family as well as second generation Continental GT V8 S coupe, finished in Jetstream.

*A Continental GT setting the Production Class record at the 2019 Pikes Peak International Hillclimb.*

The Continental GT has also supported Bentley’s long tradition of racing and record-breaking that started in the 1920s when the Bentley Boys set the pace at European circuits. Some recent achievements: the first Ice Speed Record GT, driven by 4-times World Rally Champion Juha Kankkunen; and the 2019 Pikes Peak GT, which still holds the Production Class record at the Pikes Peak International Hill Climb.

Only electric power for Bentley vehicles by the end of this decade

New Bentayga Hybrid – first of two Bentley PHEVs for 2021

Bentley has launched the first of two PHEVs (Plug-in Hybrid Electric Vehicles) – the Bentayga Hybrid which the company says is the only electrified true-luxury SUV in the world. It is the third model in the Bentley SUV portfolio and after deliveries start in mid-2021, it is expected to become the best-selling version of latest Bentayga family.

The hybrid powertrain consists of a 94 kW (126 bhp) E Motor which can produce up to 350 Nm of torque. Working together with the electric motor is a 3-litre twin turbocharged V6 petrol engine that provides additional torque as required or when going at speeds above 135 km/h. To warn pedestrians of the vehicle’s near silent movement, a dedicated speaker emits an exterior sound at low speeds.

The 17.3-kWh lithium-ion battery pack consist of 168 individual cells with an expected life of 160,000 kms or 8 years, and can be charged to 100% in as little as 2.5 hours (depending on region and charging facilities). The power electronics convert the energy stored from the high voltage battery to supply the E Motor or supplement the existing 12V vehicle electrical infrastructure.

Three E modes
The driver of the Bentayga Hybrid can choose different drive modes for optimum motoring performance and efficiency. A dedicated button allows control over the 3 E Modes – EV Drive, Hybrid Mode and Hold Mode. These will enable the driver to manually manage battery usage during a journey – though this can also be managed automatically by the car.

There is also an Efficiency Accelerator Pedal which provides a pressure point when in EV Drive to denote the boundary between pure electric and hybrid power. This encourages the driver to stay in EV Drive for as long as possible but can also be disabled if required. In pure electric drive, the E Motor continues to function up to speeds of up to 135 km/h.

Bentley Hybrid Efficiency Braking blends seamless integration of braking between the E Motor and conventional hydraulic braking, to provide a conventional feel to the brake pedal for comfort and the driving experience while maximising recuperation of energy.

Real-world usage studies
Bentley’s research shows over 90% of owners use their first-generation Bentayga Hybrid on a daily basis or several times a week, and nearly 100% of them use EV mode, with half of them consistently undertaking journeys of less than 50 kms.

It was also found that 78% of zero emissions journeys (those in pure electric mode) were achieved regularly over a 900-km activity. In a more urban environment, one of Bentley’s development drivers achieved 67% in EV model over 1,080 kms around San Francisco. In the UK, Chris Cole (Project Leader for the Bentayga Hybrid) did 64% with zero emissions commuting to and from the factory. In real-world terms, therefore, the majority of journeys can be achieved completely in electric mode only.

Unified Bentley design DNA
The new exterior and interior design emphasise Bentley design DNA across the entire model range. It has been completely refreshed from the previous generation to create an even more stylish and purposeful car. Every panel at the front and rear of the car has been altered to give it a cleaner and more modern look.

At the front, a larger and more upright new matrix grille allows the Bentayga’s elegant bonnet to sweep down to the very edge of the chrome work. This gives the car a more dominant, upright profile and pushes the new elliptical LED matrix headlamps further apart, raising them 30 mm higher leading to a more muscular aesthetic. The new headlamps also include the marque’s now-signature cut crystal design, which makes them appear to sparkle even when not lit.

Perhaps the most dramatic design changes can be seen at the rear of the car where the new Bentayga range can be clearly differentiated from its predecessor. In line with the Continental GT, it features elliptical tail lamps for the first time.

The new looks are further accentuated with numerous individualisation possibilities, including the contemporary urban appeal of the Blackline Specification that replaces all exterior chrome with black versions.

Re-imagined interior
A quieter and more refined driving experience is promised with the Bentayga Hybrid. The interior has been re-imagined and now contains a modernised combination of luxury materials and intricate craftsmanship. Bentley designers have created an even more relaxing environment for passengers with major changes to the door trims and steering wheel, plus a redesigned centre fascia and digital instrumentation cluster. These are complemented by new seats that further improve on seat comfort.

Two seating configurations are available. The standard 5-seat layout benefits from an all-new seat frame, doubling the travel of the rear-seat recline angle, and the optional 4-seat configuration has two individual rear seats separated by a centre console. The ergonomics of the 4-seat configuration are further enhanced from a 30 mm increase in knee room in the upright seated position, with an improvement of almost 100 mm in the reclined position, making luxury travel even more comfortable.

A new quilting design is included in Mulliner Driving Specification cars, while customers can choose from 8 sustainably-sourced veneers including two straight grained options new to Bentayga – Koa and Crown Cut Walnut.

A next generation infotainment system is integrated seamlessly into the handcrafted, Bentley ‘wing’ dashboard design and features a 10.9-inch display screen with edge-to-edge graphics. The all-new digital display includes super high-resolution and dynamic graphics which are configurable to suit driver preferences.

The latest hardware and software bring all-new navigation with satellite maps, online search and other features. Wireless Apple CarPlay is standard for the first time, alongside the existing wired system, along with Android Auto. Rear seat occupants benefit from the introduction of a new, larger touchscreen remote control tablet, similar to that introduced in the all-new Flying Spur.

Connectivity around the car has been significantly improved, with USB-C data ports and a wireless phone charger now standard. The new Bentayga range is now provided with an embedded SIM, as with the latest Continental GT models, meaning My Bentley connected car features no longer require customers to provide their own data connection.

Virtual experience introduces new Bentley Bentayga in Asia-Pacific region

Bacalar Car Zero in final phases of testing by Bentley Mulliner

The first member of the Bentley Mulliner Coachbuilt portfolio – the Bacalar – is now undergoing final test, development and durability work ahead of the start of build next year of 12 pre-sold customer cars. The on-car validation programmes have been condensed into an extremely busy schedule covering 20 weeks, which started this month.

So far, the car – designated Bacalar Car Zero – has completed wind tunnel-based aerodynamic assessment, high speed stability and top speed testing, handling and dynamics evaluations, appraisal of noise and vibration, and careful thermal measurements. It now enters a period of ongoing customer-focused mileage accumulation and durability work, before a phase of climate cycle testing up to 80°C and an intensive electrical system validation.

The purpose-built engineering prototype and the first barchetta-style Bentley of the modern era is already accumulating mileage and passing crucial quality tests at a variety of locations around Europe.

All of this work is vital to sign-off the new and bespoke nature of the Bacalar. It incorporates a total of more than 750 new components, all of which have to pass Bentley’s exceptionally stringent quality, functionality and durability standards. More than 40 of those parts are crafted in carbonfibre, while a complement of nearly 100 are produced using rapid additive manufacture techniques.

“Very much like Blower Car Zero that we unveiled earlier, Bacalar Car Zero is the crucial prototype that we’re using to sign-off the design, engineering and craftsmanship of this ground-breaking part of Bentley Mulliner’s future. The Bacalar is a thoroughly modern iteration of the coachbuilt Bentleys of the past – extremely rare, entirely handcrafted, totally bespoke to each customer and exquisite in its details. The whole team behind the car is thrilled to see the prototype shrugging off every test we throw at it, and we’re really looking forward to starting the build of the 12 customer cars,” said Bentley’s Director of Mulliner, Paul Williams.

2021 Bentley Mulliner Bacalar — *Each of the 12 cars (already sold) will be uniquely personalised to the requirements of the customer.*

Just 12 examples of this striking, limited edition model are being created, guaranteeing rarity and exclusivity. The Bacalar looks to the future of bespoke luxury motoring as each model will be handcrafted according to the individual customer’s personal tastes.

This exceptionally rare car is appropriately named after Laguna Bacalar in Mexico’s Yucatan peninsula, a lake renowned for its breathtaking natural beauty, continuing Bentley’s strategy of naming cars after remarkable landmarks which started with Bentayga in 2015.

*Bentley Mulliner will personalise a car in any way specified by the customer… even with this rainbow finish.*

The Bacalar brought to life by Bentley Mulliner is a roofless Barchetta design with all-new and highly muscular coachwork. Embracing a myriad of options and materials, each Bacalar will be truly unique, the result of direct interaction between the Bentley Mulliner design team and the individual customer.

The Bacalar features an enhanced version of Bentley’s 6-litre, W12 TSI engine. Claimed to be the most advanced 12-cylinder engine in the world, it produces 659 ps/900 Nm, delivered to the wheels through an advanced Active All-Wheel-Drive System. The system allows the Bacalar to use rear-wheel drive as much as possible during normal driving for optimum efficiency and dynamic performance.

The Bacalar shares no body panel with any other car in the Bentley model line-up and derives inspiration from the dramatic EXP 100 GT concept car conceived to mark the company’s centenary last year. Indeed, it only shares one exterior component with a Continental GT – the door handle, simply because it contains the keyless entry system.

The rear clamshell, wings and top deck of the Bacalar are crafted from carbonfibre, while the doors are lightweight aluminium. Combined with the use of three-dimensional printing, it has allowed designers to create an even more distinctive car.

The exterior look of each model is completed in collaboration with individual customers, who have been able to further personalise their car, choosing from rare paint options, exterior treatments and design themes. The Bacalar represents a return to the exciting early years of Bentley, allowing owners to help shape the car of their dreams.

Only 12 people will get to own this super exclusive Bentley Bacalar (w/VIDEO)

Piston.my

Bentley

Bentley aiming for a third record at Pikes Peak International Hill Climb this month with Continental GT3

New Bentayga Speed now available in Malaysia

Four Chassis Technologies That Give The New Bentley Continental GT Speed Its Superlative Driving Dynamics

Most extreme roadcar-based Bentley to compete in Pikes Peak event on biofuel

New Bentley Flying Spur V8 arrives in Malaysia, priced from RM839,000

2021 Bentley Continental GT Speed

FEATURE – The German engine that was born on a Japanese bullet-train

80,000 Bentley Continentals delivered in 18 years

New Bentayga Hybrid – first of two Bentley PHEVs for 2021

Bacalar Car Zero in final phases of testing by Bentley Mulliner

Bentley Continental GT Generasi Keempat Mempunyai Kuasa Hibrid Prestasi Ultra

Fourth-Generation Bentley Continental GT Features the Ultra Performance Hybrid Powertrain

Model Edisi 8 Khas Bentley: Masa untuk Menamatkan Enjin Petrol V8 Semasa

Bentley’s Special Edition 8 Models Bid Farewell to Current-Generation Petrol V8 Engine

Bentley Memperkenalkan Hibrid Ultra Performance V8: Era Baharu Kuasa dan Kecekapan

Bentley Introduces Ultra Performance V8 Hybrid: A New Era of Power and Efficiency

Bentley Memperkenalkan Batur Convertible – Terhad kepada 16 Unit

Bentley Introduces the New Batur Convertible – Limited to 16 Units

Bentley Bentayga Edisi Apex oleh Mulliner – Terhad kepada 20 Unit Di Seluruh Dunia

The Bentley Bentayga Apex Edition by Mulliner – Limited to 20 Examples Globally

Archive

Maserati Unveils The 2024 GranCabrio – 535hp and 650Nm

smart Damansara Opens 3S Centre in Mutiara Damansara

Audi E-tron GT Set for Mid-Lifecycle Update

Bentley’s Special Edition 8 Models Bid Farewell to Current-Generation Petrol V8 Engine

Saudi Arabia and UAE Oil Giants Explore Lithium Extraction from Brine

Follow us on Facebook

Follow us on YouTube

The Piston Show