The second electric Porsche from Zuffenhausen is going into series production! At a meeting on 18 October, the Supervisory Board of Porsche AG gave the green light for series production of the concept study Mission E Cross Turismo. The sports car manufacturer will create 300 additional jobs at its headquarters in Zuffenhausen for production of the vehicle, which was presented at the Geneva Motor Show 2018.
The road-ready concept study Mission E Cross Turismo was a highlight in Geneva and was well received by both visitors to the show and the media. The four-door Cross Turismo has an 800-volt architecture and is prepared for connection to the fast charging network. It has a system output of 600 hp and a range of 500 km (NEDC). The vehicle is a derivative of the Taycan.
The first purely electric Porsche will be launched on the market in 2019. The introduction of the Taycan is generating 1,200 new jobs in Zuffenhausen. Great importance is attached to sustainability in production, which will therefore be carbon-neutral. Porsche plans to invest more than 6 billion euros in electromobility by 2022.
Thanks to a strong third quarter, Porsche AG once again increased its operating result, revenue, deliveries and number of employees in the first nine months of 2018. The operating result compared with the same period in the previous year grew by around 11 per cent to 3.3 billion euros, with revenue increasing by 12 per cent to 19.1 billion euros. The return on sales was 17.4 percent. Deliveries grew by six percent, with the company handing over 196,562 vehicles to customers by the end of September. The workforce grew around eight per cent to reach 31,753 employees.
“The Panamera and our icon, the 911, enjoyed a particularly noticeable increase in demand,” says Oliver Blume, CEO of Porsche AG (above). “Behind all of this is our strong workforce, which is expanding towards a record level of 32,000 total employees. Around a quarter of the 1,200 jobs for our first purely electric sports car, the Taycan, have already been filled. Now that the Supervisory Board has given the green light for the Taycan Cross Turismo – the series-production version of our second electric sports car – we plan to take on an additional 300 people,” adds Blume.
According to Lutz Meschke, Deputy Chairman of the Executive Board and Member of the Executive Board, Finance and IT at Porsche (above), the result for the third quarter is attributable in particular to positive mix effects and increased volume. A negative impact was caused by unfavourable currency fluctuations and high investments in electrification, as well as the development of new business fields.
“This result gives us momentum for the year-end sprint, which will be very challenging for us,” says Meschke. “In addition to economic and political uncertainties, we also have to deal with the changeover to the new WLTP test cycle and gasoline particulate filters, as well as the farewell to diesel.” The new emissions legislation has been in force in Europe since 1 September. As part of the changeover, the new models will be introduced in stages, resulting in a temporary restriction of the product range.
Porsche recorded particularly strong growth in deliveries in Europe in the first nine months of 2018, with an increase of nine percent to 66,551 units. Overall, the sports car manufacturer increased deliveries by six percent to 196,562 vehicles. In Germany alone, deliveries increased by 13 percent to 24,709 vehicles. Growth in China, the largest single market of Porsche, was also up four percent with 56,254 vehicles delivered.
In terms of the model ranges, the Panamera showed the largest percentage increase: up to the end of September, deliveries of the four-door sports car increased by 60 percent. In Europe, more than 60 percent of these vehicles were equipped with a plug-in hybrid drive. The 911 also saw double-digit growth with an increase of 19 percent. The highest-volume model ranges remain the Macan with 68,050 delivered vehicles and the Cayenne with 49,715 units.
Porsche expects deliveries for 2018 as a whole to reach the record level of the previous year again; in 2017, the sports car manufacturer delivered 246,375 vehicles to customers. Despite the major challenges in the fourth quarter, the company expects an increase in revenue for the 2018 fiscal year compared with the previous year due to improved mix effects. The aim is to achieve a stable operating result compared with the previous year. The strategic goal of an operating return on sales of 15 percent remains unchanged.
The new Porsche Macan now comes with an efficient 2.0-litre, four-cylinder turbocharged petrol engine with improved combustion chamber geometry. It delivers a performance of 185 kW (252 hp) and has a maximum torque of 370 Nm. In combination with its seven-gear PDK dual-clutch gearbox, the compact SUV can go from 0 to 100 km/h in 6.7 seconds and reach a top speed of 225 km/h. Its consumption rate is 8.1 l/100 km according to the New European Driving Cycle (NEDC). With the model having received a full makeover, the most prominent new features in terms of design, comfort, connectivity and driving dynamics include the three-dimensional LED light panel at the rear and the new fully interconnected Porschecommunication management system with 10.9-inch touchscreen inside the vehicle. Check out the video!
Newly tuned chassis for enhanced balance
The vehicle dynamics of the Macan remain its core feature. The overhauled chassis increases comfort and makes the Macan even more enjoyable to drive. As is typical for a sports car, it comes with mixed-size tyres, enabling the driver to take full advantage of the benefits of the intelligent all-wheel drive Porsche Traction Management (PTM) system and adopt a dynamic driving style. Newly developed tyres with improved performance characteristics allow for even better lateral dynamics. The wheel diameters range from 18 inches as standard to an optional 21 inches.
A more streamlined design with full LED lights and new colours
In keeping with Porsche’s design DNA, the new Macan features a three-dimensional LED light panel on the rear of the vehicle. The brake lights with their four-point design are another excellent embodiment of the brand’s identity. LED technology is incorporated as standard into the newly designed main headlights, while the PorscheDynamic Light System Plus (PDLS Plus) option can be used to control light distribution adaptively. The Macan’s front end has been thoroughly redesigned and now appears wider. Drivers now have more scope to express their personality thanks to the addition of four new exterior colours – Mamba Green Metallic, Dolomite Silver Metallic, Miami Blue and Crayon.
Fully interconnected: the new Porsche Communication Management (PCM) system
The Macan offers a range of digital possibilities through the use of the new Porsche Communication Management (PCM) system. The full-HD touchscreen is now 10.9 inches in width (previously 7.2 inches). As in the Panamera and Cayenne, the user interface can be adapted to suit personal requirements via predefined tiles. Fully interconnected as standard, the new system features mobile phone preparation, two audio interfaces and intelligent voice control.
New options: GT sports steering wheel, air ioniser and traffic assistant
An expanded range of options with enhanced assist systems is available to choose from with the new Macan. The optional GT sports steering wheel echoes the style of the Porsche 911. A mode switch integrated into the steering wheel – including sport response button – is part of the optional sport chrono package that can be fitted in the Macan. Porsche has extended the list of options designed to enhance convenience, which now includes a heated windshield and an air ioniser that – together with the fine particulate air filter (fitted as standard) – improves the quality of the air inside the vehicle.
Available for enquiry now: the new Macan with more features included as standard
The new Macan is now available for enquiry at Porsche Centre Glenmarie, Sungai Besi, and Penang. The range of standard features has been expanded to include LED main headlights, the new PCM with online navigation and Connect Plus, and an anti-theft alarm system with interior surveillance.
It’s not everyday that someone takes delivery of one of the three most iconic numbers in the automotive realm, and with that in mind, following its official launch which you can read about here, Sime Darby Auto Performance (SDAP) the official importers of the Porsche brand in Malaysia, arranged a very special ‘handover’ ceremony for new owners of the 911 GT3 RS at the Sepang International Circuit! Check out the first video here…
“The new 911 GT3 RS is synonymous with hard core performance, and is hailed as the perfect bridge between the track and the road. At the heart the new 911 GT3 RS is a 383 kW (520 hp), four-litre, high-performance naturally-aspirated engine. It accelerates from 0 to 100 km/h in 3.2 seconds, reaching a top speed of 312 km/h. Following the launch of the 911 GT2 RS, this latest release will see SDAP present its second GT road-approved sports car within the same year” – SDAP.
The following video is just a brief walkabout and wrap-up of the days events… as well as a look at some of the more classic 911’s that made the trip to Sepang recently…
What it’s like to drive the Porsche 911 GT3 … in 5-min orless
It’s a teeny bit hard to put into words the overall feeling of taking a 911 GT3 on track for the first time. Yes. it’s a bit intimidating, let’s not forget there’s over 500bhp on tap, with 0-100kmh seen to in 3.2sec… but to be honest, it’s far from the scariest drive you’ll ever have (being a passenger in the Porsche Carrera Cup Car on the other hand will give you a heart-attack for sure).
The 911 GT3 is whatever you want it to be. That’s the best way I can put it. For the five or so laps, I did a combination of driving that its owners would face. The car can be driven leisurely and it will just putter around sedately, comfortably and totally hide the fact that there’s a raving beast with serious anger-management issues sitting just a foot behind you.
To unleash the beast, just press the ‘loud buttons’ on the centre console, floor the accelerator pedal and hold-on. The 911 GT3 will then show you its true colours. The beauty of it all though, is that it doesn’t feel like a Funny Car dragster about to spiral out of control and send you butt-first into the shrubbery, in fact even in full beast-mode, the 911 GT3 feels composed, despite sounding like a MOAB ordinance device has just landed behind you.
Point it where you want it to go, and it goes there, hit the PCCB brakes where you want it to slow down and it will; you hit every apex, everytime. 20-inch lightweight wheels with 265/35 rubbers front, and 21 inch wheels with 325/30 tyres at the rear provide copious amounts of grip and ensure the intended path is always hit dead-on. Active safety systems react instantly to correct any messed-up manoeuvre.
And then once you’re done being a juvenile, turn off the aforementioned loud buttons, and all at once, almost instantly, the GT3 becomes just a sedate 2-door coupe again. It’s a miraculous transformation, one that needs to be experienced to be believed. There’s no such thing as ‘the perfect car’, it’ll never exist, but boy, the Porsche 911 GT3 comes pretty damn close folks. Now just imagine what the 911 GT3 RS would feel like… – Chris Wee.
Sime Darby Auto Performance (SDAP), the authorised importer of Porsche vehicles in Malaysia, is expanding its footprint to the southern region with the upcoming Porsche Centre Johor Bahru. With an estimated investment of RM 48 million, the new Porsche Centre Johor Bahru will occupy an estimated build-up area of 58,311 sq ft on 74,052 sq ft of land. The state-of-the-art centre is yet another prominent addition to the development of the Porsche brand in Malaysia following the recent launch of Porsche Centre Penang in 2017.
“SDAP has been the sole importer of Porsche vehicles in Malaysia since 2010 and has continuously invested into the Porsche brand, with special dedication to state-of-the-art facilities and highly-skilled employees. We see a huge potential in the southern market, with the upcoming Porsche Centre Johor Bahru, it marks another milestone for Porsche in Malaysia,” said Christopher Hunter, Chief Executive Officer of Sime Darby Auto Performance. “I strongly believe in the long-term potential for Porsche in Malaysia and I am convinced that this latest addition will support our growth whilst assuring an outstanding experience for our customers,” he added.
A first for Porsche in Malaysia, the new 4S Porsche Centre will be equipped with a sales showroom, service workshop, spare parts warehouse, and a state-of-the-art body and paint centre. In assuring the same high standards of performance, SDAP sets the standard for both technical and ecological to be in accordance to Porsche AG requirements. The facility will be equipped with the latest Porsche technology, trained professionals, and the use of genuine Porsche parts, materials, tools and equipment.
“After Sales has proven to be the key differentiator in the luxury car business. As a customer-centric brand, peace-of-mind ownership experience is a pivotal element in our approach. With the inauguration of the latest facility, SDAP aims to fulfil growing customer requirements and enhance our After Sales competencies,” Christopher added. Construction work is expected to commence in end of 2018 and operations are set to begin in first quarter of 2020.
Positive development over the course of the year: Porsche AG increased its vehicle deliveries by six percent to 196,562 vehicles in the first nine months of 2018. The performance of the Sports Car manufacturer was particularly strong in Europe: the growth here was 9% to 66,551 units. In Germany alone, deliveries increased by 13 percent to 24,709 vehicles. Growth in China, the largest single market of Porsche, was also four percent with 56,254 vehicles delivered. In the model ranges, the Panamera showed the largest percentage increase: up to the end of September, deliveries of the four-door Sports Car increased by 60 percent. The 911 also saw double-digit growth with a plus of 19 percent. The highest-volume model ranges remain the Macan (see below) with 68,050 delivered vehicles and the Cayenne with 49,715 units.
“In Germany and Europe overall, our attractive product range meant that we were very well positioned to meet the strong demand for our Sports Cars in the first nine months,” says Detlev von Platen, Member of the Executive Board for Sales and Marketing.“We are also extremely satisfied with our growth rates in the USA and China. There are a number of significant challenges that await us in the fourth quarter, and we will take proactive steps to ensure that we face up to them successfully. This includes the changeover to the new WLTP test cycle and petrol particulate filters and the farewell to diesel engines,” says von Platen.
The new emissions legislation has been in force in Europe since 1st September. The launch of new models will be staggered after the changeover. At Porsche, this will start with models from the two-door 911 and 718 Sports Car series as well as the new Macan (above & below), which was presented at the Paris Motor Show last week. Porsche has not had any diesel models in its product range since the middle of February 2018. At the end of September, the Executive Board took the final decision to no longer offer any diesel-powered vehicles in future.
At the same time, Porsche is experiencing a great increase in customer interest in hybrid models. For example, more than 60 percent of vehicles from the Panamera model range were delivered with plug-in hybrid drive in Europe. In spite of the challenges, Detlev von Platen, the Member of the Executive Board responsible for Sales, assumes that Porsche will again achieve the record of last year when 246,375 vehicles were delivered to customers.
Sime Darby Auto Performance (SDAP), the importer of Porsche vehicles in Malaysia, has introduced the new 911 GT3 RS. The new 911 GT3 RS is synonymous with hard core performance, and is hailed as the perfect bridge between the track and the road. At the heart the new 911 GT3 RS is a 383 kW (520 hp), four-litre, high-performance naturally-aspirated engine. It accelerates from 0 to 100 km/h in 3.2 seconds, reaching a top speed of 312 km/h. Following the launch of the 911 GT2 RS, this latest release will see SDAP present its second GT road-approved sports car within the same year.
“With a lap time of 6 minutes and 56.4 seconds, the new 911 GT3 RS sets a time of just nine seconds below the most powerful Porsche 911, the GT2 RS. Motorsport is an essential driving force behind the Porsche development team, a force that makes motorsport derived technology perfectly adapted for the road,” said Christopher Hunter, Chief Executive Officer of Sime Darby Auto Performance. “The new 911 GT3 RS promises an unadulterated sound, pure performance, and a challenge that a sports car enthusiast cannot resist,” he added.
Aerodynamics and interior based on the race trim
Aerodynamics have determined the design of the wide, weight-optimised body with its classic rigid rear wing. The racing look continues into the interior with full bucket seats made of carbon to provide secure lateral support in response to high-level driving dynamics. Lightweight door panels with storage nets and opening loops, reduced sound absorption and the new lightweight rear lid further emphasise the consistency of the material choices.
The most powerful naturally aspirated engine at 520 hp
The four-litre, six-cylinder naturally-aspirated engine from Porsche in the new 911 GT3 RS pushes the sports car to new limits: The flat engine delivers 15 kW (20 hp) more than the engine in the previous model and the 911 GT3. Together with a speed range of up to 9,000 rpm, it was the ideal choice as a thoroughbred sports engine. Combined with the specially calibrated seven-speed PDK, the high-performance engine guarantees an outstanding driving performance.
Motorsport-inspired chassis and Clubsport package
Motorsport technology ensures that the chassis offers exceptional driving dynamics. Ball joints on all arms provide even greater precision than conventional elastokinematic bearings. 20-inch lightweight wheels with newly developed 265/35 sports tyres on the front axle enhance agility and steering behaviour, while 21 inch wheels with 325/30 tyres at the rear axle improve traction. As with all current GT sports cars, the Clubsport package is also available for the 911 GT3 RS at no extra cost. The package includes a rollover bar, a manual fire extinguisher, preparation for a battery disconnect switch and a six-point belt for a sporty driving experience.
Weissach package for additional weight savings
For particularly ambitious drivers, the Porsche motorsport department has created an optional Weissach package for a further weight reduction. The package features additional carbon components for the chassis, interior and exterior. In its lightest configuration, this package reduces the weight of the 911 GT3 RS by approximately 17kg.
The retail base price for the new 911 GT3 RS starts from RM 2,230,000, which includes a four-year warranty. The stated price includes all applicable duties, except registration fee, road tax and insurance. Specifications and prices are subject to change without prior notice.
The new Porsche Cayenne Turbo!
Making its Malaysian premiere, the new Porsche Cayenne Turbo takes its place at the top of the Cayenne model line. The completely new top-of-the-range model from the third generation of the Cayenne once again raises the bar for sporty performance in its segment. The increased driving dynamics are based on the combination of innovative technologies such as active aerodynamics including a roof spoiler, controlled three-chamber air suspension, mixed tyres and the new high-performance brake, achieving the driving characteristics of a true sports car. As yet the MY pricing for the new Cayenne Turbo has not been finalised.
The new 911 GT3 RS and Cayenne Turbo will be at Pavilion Kuala Lumpur from today October 10 to October 14, 2018.
The 911 Speedster concept study, presented during the 70th birthday of the sports car manufacturer, will be produced as a limited special edition: Porsche has decided to start producing the purist Porsche 911 Speedster in the first half of 2019. Exactly 1,948 units of the open-top two-seater will be built. The number reminisces the Porsche 356 “Number 1” that received its operating license on June, 8 back in 1948. In Paris, Porsche presented this year’s second Speedster Concept study. Its Guards Red paintwork is a reference to the 1988 911 Speedster of the G-Model generation. The new cross-spoke 21-inch wheels in cross spoke and the black leather interior create a tasteful and sporty appearance.
Dream becomes reality: The driveable 911 Speedster Concept, initially presented on June 8 in 2018 in Zuffenhausen as a “Heritage” version, will go into production in 2019. The car was developed at Porsche Motorsport in Weissach in cooperation with Style Porsche and Porsche Exclusive Manufaktur. The future 911 Speedster, based on the 991 range, will be the first car to be offered with the new Heritage Design Packages. This exclusive accessory line by Porsche Exclusive allows for an even higher degree of personalization for the 911.
In addition to the eye-catching paintwork, 21-inch center lock wheels are another visual highlight of this latest concept study presented in Paris. Their cross-spoke wheel design is similar to that of Porsche racing cars such as the 911 RSR and the GT3 R. The tinted daytime running lights were also inspired by racing. Matching the study’s paintwork, they are kept in red. The two “Talbot”-shaped exterior mirrors as well as the fuel tank cap – centrally positioned on the bonnet – shine in black-chrome and platinum. In contrast to the previously shown “Heritage” version, the interior is using partly perforated black leather upgraded with red highlights.
All body components as well as the entire technology of both the 911 Speedster Concept cars are identical. This includes the shortened window frames with their lowered cowl top panels and the smaller side windows as well as the carbon-fibre rear bonnet with the double-bubble cover behind the seats. Both cars come with a lightweight Tonneau cover, fitted by Tenax buttons, instead of a convertible soft top.
The concept cars’ body is based on the 911 Carrera 4 Cabriolet. The fenders, as well as the front and rear bonnet are made from lightweight carbon fibre composite while the chassis was taken from the 911 GT3. Furthermore, the GT development department provided the exhaust system with its titanium tailpipes and the drivetrain including the manually operated six-speed gearbox. The same goes for the centrepiece of the limited special edition: The Speedster Concept is powered by a naturally aspirated flat-six engine developing more than 500bhp and capable of engine speeds up to 9,000 rpm.
Don’t even bother to ask how much this costs, because all 77 units are likely sold by the time you read this. Porsche has unveiled the new 935 on the occasion of the historic “Rennsport Reunion” motorsport event at Laguna Seca Raceway in California. The 515 kW (700 hp) racer featuring a body reminiscent of the legendary Porsche 935/78 will be produced in a limited number of 77 units. “This spectacular car is a birthday present from Porsche Motorsport to fans all over the world,” says Dr Frank-Steffen Walliser, Vice President Motorsport and GT Cars. “Because the car isn’t homologated, engineers and designers didn’t have to follow the usual rules and thus had freedom in the development.”
The race car’s technology for clubsport events and private training on racetracks is based on the 911 GT2 RS high-performance sports car. Like its historic predecessor, most of the body has been replaced or supplemented by carbon-fibre composite parts (CFRP). With its streamlined extended rear, the 935 reaches a length of 4.87 metres. The width of the exclusive clubsport racer measures 2.03 metres.
The spectacular aerodynamics is a completely new development and pays tribute to the Porsche 935/78 Le Mans race car, which fans dubbed “Moby Dick” due to its elongated shape, massive fairings and white base colour. The distinctive wheel arch air vents on the front fairings, which also feature on the GT3 Porsche 911 GT3 R customer vehicle, increase downforce at the front axle. Measuring 1,909 millimetres in width by 400 millimetres in depth, the rear wing lends aerodynamic balance.
Many details of the exterior are a salute to winning vehicles from the company’s motor racing history: The aerodynamically capped rims echo those of the 935/78, with the LED rear lights on the rear wing endplates adopted from the 919 Hybrid LMP1 race car. The side mirrors hail from the current Le Mans-winning 911 RSR, with the exposed titanium tailpipes modelled on the Porsche 908 from 1968.
These references are carried through to the cockpit. The knob on the gearshift lever has a laminated wood design and is reminiscent of racers such as the 917, the 909 Bergspyder and the Carrera GT super sports car. The carbon steering wheel and the colour display behind it have been taken from the 911 GT3 R from the 2019 model year. A massive safety cage combined with a racing bucket seat and a six-point safety harness ensure maximum safety. A second seat for the passenger is available as an optional extra. Air conditioning provides optimal cooling of the interior.
The new 935 is powered by a state-of-the-art 3.8-litre six-cylinder twin-turbo engine, which is largely identical to the high-performance standard unit mounted in the road-legal 911 GT2 RS. Power is transferred to the rear engine via a seven-speed Porsche Doppelkupplung (PDK) with rigid gearbox suspension at the 310-millimetre-wide rear axle. Like in the GT road models of the 911, the driver changes gears via conveniently positioned shift paddles on the steering wheel. Typical of the 911, the weight distribution ensures excellent traction and braking performances. Six-piston aluminium monobloc racing callipers on the front axle in combination with internally ventilated and grooved steel brake discs with a 390-millimeter diameter provide excellent deceleration values at the front axle. The rear axle is fitted with four-piston callipers and 355-millimeter discs.
Like the road-legal 911 GT2 RS, the 1,380-kilogram 935 is equipped with PSM (Porsche Stability Management) including traction control as well as an anti-lock braking system (ABS). Thanks to the map switch, these assistance systems can be adjusted separately or switched off completely, depending on the driving situation. Full specifications after the gallery and video below…
Technical description Porsche 935 (Type 991, Gen. 2)
Weight/dimensions:
• Weight: ca. 1,380 kg
• Length: 4,865 mm
• Width: 2,034 mm (incl. side mirrors)
• Total height: 1,359 mm
• Wheelbase: 2.457 mm
Engine:
• Water-cooled 6-cylinder aluminium twin-turbo rear-mounted boxer engine and rigid suspension; 3,800 cc; stroke 77.5 mm; bore 102 mm; ca. 515 kW (700 hp)
• 4-valve technology with camshaft adjustment and valve-lift switchover
Vario-Cam Plus
• Electronic engine management (Continental SDI 9)
• DMSB-approved 100-cell metal catalytic converter
• Rear silencer with twin tailpipes mounted centrally, Heritage Design
Transmission:
• 7-speed PDK gearbox with rigid suspension and short throw
• Dual mass flywheel
• Internal pressurised oil lubrication with active oil cooling
• Limited slip differential optimised for racing
Bodywork:
• Weight-optimised bodyshell in aluminium-steel composite design with carbon-fibre Kevlar add-on parts to improve aerodynamics and stability
• Rear wing with lights integrated in endplates
• Enlarged air inlets with integrated LED headlights in 4-point design
• Removable escape hatch in roof complying with FIA Art. 275a
• Aerodynamically optimised side mirrors
• 115-litre FT3 safety fuel cell with fuel cut-off safety valve in compliance with FIA Art. 253 in the front, optional with fast-fill coupling
• Welded-in safety cage
• Recaro racing bucket seat with longitudinal seat adjustment and padding system in accordance with FIA Standard 8862/2009
• 6-point safety harness
• Air jack system (three jacks)
• Fire extinguishing system with electronic release unit
Suspension:
Front axle: MacPherson suspension strut; forged suspension links, optimised stiffness with high-performance spherical bearings, centre-locking wheel nuts; 3-way racing dampers, reinforced tie-rod; Electro-mechanical power steering with variable steering ratio; anti-roll bar
Rear axle: Lightweight multi-link suspension, strut ball jointed (Unibal); centre-locking wheel nuts; 3-way racing dampers; anti-roll bar
Brakes:
Brake system:
• Two separate brake circuits for front and rear axles; adjustable via brake balance bar system
Front axle:
• Six-piston aluminium monobloc racing brake callipers with anti-knock-back piston springs; steel brake discs, internally ventilated with 380 mm diameter, racing brake pads, optimised brake cooling ducts
Rear axle:
• Four-piston aluminium monobloc racing brake callipers with anti-knock-back piston springs; steel brake discs, internally ventilated with 355 mm diameter, racing brake pads, optimised brake cooling ducts
Electrical system:
• Instrument cluster consisting of COSWORTH ICD with integrated data logger, sport Chrono watch and boost gauge in a vintage finish
• CFK multifunction steering wheel with pit speed limiter and quick-release coupling
• PSM (Porsche Stability Management) with ABS, Traction Control and Electronic Stability Control (able to be completely switched off)
• Centre console with map switch to adjust the ABS, ESC, TC and switch between preset tyre circumferences
• Porsche Track Precision Race App
• Integrated lap trigger
• Lightweight lithium-ion (Li-Fe-Po-) battery, 60 Ah, leakproof, mounted in passenger footwell
• Emergency cut-off switch in cockpit and outside left of the windscreen
• Tyre pressure monitoring system (TPMS)
• Air conditioning
Rims/Tyres:
Front axle: One-piece light-alloy forged wheels
11.5J x 18 offset 15.3 with centre-locking nut; Michelin transport tyres 29/65-R18
Rear axle: One-piece light-alloy forged wheels
13J x 18 offset -10 with centre-locking nut; Michelin transport tyres 31/71-R18
Colour:
Agate gray water-based paint; optional: Martini livery
Combined fuel consumption 11.8 l/100 km; CO2 emissions 269 g/km
Porsche Classichas built a highly desirable collector’s item: the last 911 Turbo with an air-cooled engine – 20 years after the end of series production. The design of the 993-generation 911 Turbo is based on an original body-shell, and the vehicle’s appearance is just as unique as its history: Painted in Golden Yellow Metallic, it references the 2018 911 Turbo S Exclusive Series. The black wheels are highlighted by Golden Yellow design accents, while the seats and interior trim are finished in black with Golden Yellow details. Check out the video below!
The bodyshell features the characteristic side air intakes of the 993 Turbo S that were also available as an option for the regular 911 Turbo in 1998. Developing 450 horsepower, the classic sports car will celebrate its world premiere at the Porsche Rennsport Reunion in Laguna Seca (USA) on September 27, 2018. The collector’s item, which is limited to use on private tracks, will then be auctioned off by RM Sotheby’s at the Porsche Experience Center in Atlanta on October 27, 2018. The proceeds will be donated to the Ferry Porsche Foundation, a non-profit organization established this year to mark the “70 years of Porsche sports cars” celebrations.
“Project Gold” showcases the comprehensive skill of Porsche Classic in fascinating fashion”, says Detlev von Platen, Member of the Executive Board responsible for Sales and Marketing at Porsche AG. “This project clearly demonstrates our strategic approach. Although we are starting a new chapter in our sports car history with the Porsche Taycan, the story of how the company evolved is no less significant. On the contrary, this Golden Yellow 993 demonstrates how incredibly passionate we are about the tradition of our brand.”
“Project Gold” represents Porsche Classic’s spectacular contribution to the “70 years of Porsche sports cars” celebrations: With this anniversary in mind as well as the forthcoming market launch of the Taycan as the first purely electric Porsche sports car, the experts at Porsche Classic came up with the idea of constructing a completely new vehicle based on an existing genuine type 993 body-shell, showcasing both tradition and innovation. The experts were able to rely on a selection of over 6,500 genuine parts that Porsche Classic offers exclusively for 993 generation models. Overall, the Classic division currently stocks some 52,000 parts, which can be sourced via Porsche Classic Partners and Porsche Centers around the globe to repair and restore classic Porsche cars.
Construction of the unique vehicle took approximately one and a half years. The bodyshell was first put through the corrosion protection and painting process applied to today’s series-production vehicles. The collector’s item was then assembled and tuned by Porsche Classic specialists at the Porsche restoration workshop in Stuttgart. A brand new 3.6-liter twin-turbo flat-six engine developing 450 hp was installed, delivering the performance the vehicle originally had when it was in production. The manual transmission and all-wheel drive were also sourced from the Porsche Classic range of genuine parts. The hand-stamped chassis number follows the last series-production model of the 993 Turbo which rolled off the production line in 1998.
The exterior and interior elements were coordinated with the workshop’s dedicated Porsche Exclusive Manufaktur experts who were responsible for creating the 2018 911 Turbo S Exclusive series, which was limited to 500 units worldwide. To complement these elements, the designers at Style Porsche worked on the color gradients and positioning of badges as well as other interior details.
The 993 remains a sought-after collector’s item to this day, and is considered a particularly sophisticated and reliable vehicle. It was the first 911 to feature a redesigned aluminium chassis, giving it exceptional agility at the time. The 911 Turbo version of the 993 was also the first to have a twin-turbo engine, making it the lowest-emission standard automotive powertrain in the world in 1995.
The front section is lower-slung than on the earlier 911 models, thanks to a switch from round to poly ellipsoidal headlights. Hollow-spoke aluminum wheels, a first for any car with aluminum wheels, were another innovation of the all-wheel drive 911 Turbo version. Only 345 units of the 911 Turbo S with its 450 hp performance-enhanced engine were built.
