Hari Raya Aidilfitri is coming soon and for those planning to have a new vehicle to celebrate, Edaran Tan Chong Motor is offering some special deals. Selected models come with accessories packages worth up to RM10,150, and there’s still the sales tax exemption (except for pick-up trucks) which the government is allowing until June 30, 2022.
During the month of April and May, ETCM is also having a contest with RM50,000 worth of Lazada e-Vouchers to be won. Lucky purchasers of new Nissan vehicles will have a chance to win Lazada e-Vouchers (RM5,000 per winner. T&C apply). The e-voucher can be used for purchases on the Lazada e-commerce website which would be great for those who are doing Hari Raya shopping.
While some companies have indicated that their order bank has become quite full and ready stocks are not available right away, ETCM says it has anticipated the festive season demand and has prepared stocks for fast delivery. After all, the company has been selling cars to Malaysians since the 1950s and understands the market well.
For those interested in the Almera Turbo, a test-drive will provide an opportunity to experience its advanced technology, especially in the turbocharged engine. The high torque output gives strong acceleration but at the same time, fuel consumption can be up to 18.4 kms/litre as one owner proved. Those who test-drive the Almera Turbo will receive a Watsons Voucher worth RM30 in appreciation of their interest.
The ’Mothertrucker’ Navara has proven to be well suited for dual roles of personal transport as well as workhorse. There are five variants to choose from for different requirements and budgets, with prices starting from RM111,050.
Nissan owners, wherever in Malaysia they are, are assured of aftersales services from Tan Chong Expres Auto Servis (TCEAS). Appointments can also be booked online using the DriveOn app available at the Apple App Store or Google Play Store.
All new Nissan vehicles come with a 5-year warranty covering manufacturing defects and other than the Navara, there is no limit on mileage travelled after registration. For the Navara, the mileage limit is 150,000 kms or 5 years, whichever comes first.
For customers who are not able to visit Nissan showroom, there’s the Nissan Online Showroom where information on the models and offers available can be found, and test-drives can also be requested. If a purchase decision is made at the Lazada Nissan Flagship store, a low-booking fee payment online is now available and a Sales Representative will assist in completing the purchase process.
For more information, www.nissan.com.my where the locations of authorised Nissan showrooms can also be found.
Jaguar TCS Racing’s Mitch Evans claimed back-to-back victories in the Formula E Rome E-Prix double-header of races with a dramatic win in Round 5 after a first place finish in Round 4 the day before. The Kiwi driver led Poleman Jean-Eric Vergne (DS TECHEETAH) in second and Envision Racing’s Robin Frijns.
DS TECHEETAH’s Vergne had pulled away from pole position while his former teammate and TAG Heuer Porsche Formula E Team driver Andre Lotterer passed Avalanche Andretti’s Jake Dennis into second. By the top of the hill and Turn 7, Dennis had reclaimed second, dropping Lotterer back down to third.
With a collision between Mahindra Racing’s Alex Sims and Nissan e.dams’ Max Gunther, the German driver retired to the pits, ending his race in the first 5 minutes. Despite setting the fastest lap in Qualifying earlier in the day, Dennis started losing ground after Lotterer attacked at Turn 7, reclaiming second. Shortly after, Evans managed to slip past into third.
Squeezing into Turn 4 side by side, standings leader and ROKiT Venturi Racing driver Edoardo Mortara tried to pass DS TECHEETAH’s Antonio Felix da Costa, with the Portuguese racer closing the door on the Swiss, damaging the front wing of his car. Mortara then clipped the wall on Turn 19 and coasted to safety, retiring from the race with a suspected driveshaft failure.
Italian driver Antionio Giovinazzi had lots of support from the crowd but the DRAGON/PENSKE AUTOSPORT drivers’ car came to a stop on the track between Turn 8 and 9, which brought out the Porsche Taycan Safety Car. When the Safety Car was brought in and the racing recommenced, 24 minutes remained. Vergne led Evans for less than a lap before the opportunist Evans overtook into Turn 4 to take the lead.
Dennis continued to slip down the order to seventh as the race passed the halfway mark. At the front, Evans continued to lead Vergne, with Porsche’s Lotterer in second and Frijns in third. Enjoying the benefit of the extra power gained through his 8-minute ATTACK MODE, Frijns made his way up the order and took race leader Evans up the hill on Turn 7.
Paying the price for closing the door earlier on Mortara, da Costa received a 5-minute time penalty while back at the front, Lotterer was looking to take the lead with extra power gained through ATTACK MODE. Now in second, the German driver was close on the tail of Frijns who was desperately trying to hold on to the lead.
With seconds of his ATTACK MODE power left, Lotterer made his move on Frijns to take the lead into Turn 4. Now setting the pace, the German driver was closing in on his first victory in the Formula E World Championship with 10 minutes left on the clock.
After a short Safety Car outing while Sims’ Mahindra racing car was recovered when it spun on Turn 14, racing was back underway. Added Time provided an extension of the race.
Saving his ATTACK MODE until the end of the race, Evans took the boost with less than 8 minutes of the race remaining. With extra power, Evans went after Lotterer, hunting the German driver before taking the lead on the hill up to Turn 7. With Evans holding firm, Vergne slipped past his former teammate Lotterer, jumping to second, before Frijns made a move on the German to knock him off the podium and into fourth.
With Envision Racing’s Nick Cassidy in the wall at the top of Turn 7, the Taycan Safety Car again made a brief appearance before coming in to leave a last lap dash for the finish. Evans was out in front and Vergne close behind, with the Frenchman was on the attack to regain his lead. However, he was unable to catch Evans and the Jaguar driver made it across the finish line first. Close behind, Vergne to join on the podium in Rome was Frijns.
The championship next moves to Monaco for a single round on April 30. This is a much-anticipated event as the Gen3 cars for the next season will be unveiled for viewing.
Auto Bavaria, a dealership group for the BMW Group in Malaysia, has opened its new outlet in Jalan Chan Sow Lin, Kuala Lumpur, to complement the aftersales services at Auto Bavaria Kuala Lumpur. The facility, referred to as Auto Bavaria CSL, focusses on providing quick service and repairs for BMW and MINI vehicles with the BMW & MINI Service Fast Lane.
It is the third Auto Bavaria service workshop in the city centre, alongside Jalan Tun Razak and Sungai Besi. It operates 6 days a week, except on public holidays
Offering regular vehicle maintenance, wear and tear repairs, tyre replacements, cosmetic repairs, etc, the new 39,800 square-foot facility has a customer lounge, Isetta Bar, reception bays for incoming vehicles and a BMW AC charging station. At this time, it has a team of 23 employees
According to Vi Thim Juan, Managing Director of Auto Bavaria, Auto Bavaria CSL can provide BMW and MINI owners with the necessary service and repairs for their vehicles within 2 hours, further optimising the Premium Ownership Experience for customers in Malaysia.
“For BMW Group Malaysia, the commitment that we share with our dealers across the country to fulfil the promise of Sheer Driving remains our greatest pride. Part of this commitment is ensuring that we deliver exceptional customer service to all our BMW, MINI and also BMW Motorrad customers – and to do so efficiently. We are pleased to be celebrating with Auto Bavaria today –the establishment of their second BMW & MINI Service Fast Lane centre in the country,” said Hans de Visser, Managing Director of BMW Group Malaysia.
The Cullinan SUV by Rolls-Royce costs upwards of RM1.8 million and for most owners, it would probably be part of a fleet, perhaps used for occasions when some rough conditions are expected. There might be some owners who will want to make use of all the off-road capability that Rolls-Royce engineers have given it and travel far off-road.
One such customer in the Arabian Peninsular seems to have such an intent and got Delta 4×4, a German tuning company, to ruggedize his Cullinan and also add some accessories for camping in comfort (probably in the desert). In total, the project would have cost the owner at least 150,000 euros (about RM690,000).
It’s the sort of assignment that Delta 4×4 has expertise in and apart from installing its own line of accessories like a brush bar, spotlights (10 PIAA units in total), skid plates, and a snorkel, it also incorporated a roof rack with a rooftop tent.
To enable it to cross rougher terrain, Delta4x4 added wider fenders over the custom bead-lock 20-inch wheels and Mickey Thompson off-road tyres. Ground clearance is extended with a 3.15-inch lift kit to add 150 mm more than a standard Cullinan.
The 6.75-litre twin-turbo V-12 engine under the long bonnet has plenty of power – 563 bhp with 850 Nm of torque – so no upgrading would be necessary. The exhaust system, however, is customised ‘for a nicer sound’ and improved performance. Likewise with the 8-speed automatic transmission and all-wheel drive which are also unchanged from the standard model the customer purchased originally.
While this is a one-off conversion for the Cullinan, Delta 4×4 can apply the same expertise for other models and it has done so with vehicles like the Mercedes-Benz G-Class and X-Class, Ford Ranger, Volkswagen Amaro, Mitsubishi Triton and even a Porsche 911 Carrera 4S.
Pole man Charles Leclerc got his Ferrari off to a clean start for the 2022 Australian GP as Max Verstappen pursued him into the first corner. However, things were not good for Carlos Sainz, who had started in P9 and then fell to 13th right away. Trying hard to make up, he lost it in Turn 9 and slid into the gravel. This brought out the Virtual Safety Car to enable marshals to clear the Ferrari.
Shortly after, the F1 Safety Car entered the track to manage the racing cars. During that time, Aston Martin’s Lance Stroll was the first to come back to the pits to move to hard tyres. The early appearance of the Safety Car meant that tyre temperatures did not get up to optimum fast enough as the cars slowed down.
The Safety Car departed on lap 7 and racing resumed with Leclerc still in the lead. The regulations for race restarts after the Safety Car departs have been made clearer and the tactics which Verstappen used in the previous 3 races (running alongside the leader) are no longer permitted.
On restart, Leclerc shot forward to try to widen the gap with the Red Bull and in doing so, set the first fastest lap of the day, putting himself almost a second ahead of Verstappen. Behind them, Hamilton was busy keeping Sergio Perez from getting past to take his third place.
Though the track is familiar to most of the drivers, the resurfacing had made it a bit slippery too and this was something they had to contend with. Sebastian Vettel slid off momentarily and Verstappen was complaining of tyre graining.
On lap 10, Perez flew past Hamilton on DRS to take over third and the Mercedes-AMG driver clearly could not do anything. With two Red Bulls behind him, albeit with a 3-second gap from Verstappen, the pressure on Leclerc increased.
Verstappen’s struggles saw him dropping back further to 9 seconds from Leclerc by lap 17, amd he came in 2 laps later for a tyre change, rejoining at 7th ahead of Fernando Alonso. This moved Perez up to second but he too came in on lap 21 to get onto hard tyres. The Red Bull pit stops moved Hamilton and George Russell up to second and third places behind Leclerc, albeit some 17 seconds away.
Finally on lap 22, Leclerc came in and so did Hamilton, and the Ferrari did not lose its lead while Hamilton was able to get ahead of Perez. Verstappen had moved back to second and was 4 seconds behind the Ferrari and then Vettel lost it and crashed into a barrier near Turn 4. Out came the Safety Car, negating the Dutchman’s advantageous position. Russell took the opportunity to come in for his tyre change and managed to get back in third place.
Racing resumed on lap 27 and Leclerc took off but just barely stayed ahead of Verstappen as they both entered Turn 3. Russell was also close but had to watch out for Alonso who was making a bid for the third place. But before long, Perez was the one to hassle the new Mercedes-AMG driver as Alonso dropped back and became the target for Hamilton.
With more than half the race completed, only three drivers had not changed from their hard tyres – Alonso, Kevin Magnussen and Alex Albon, The others would be managing their tyres to make it to the 58th lap.
Magnussen’s battle with Daniel Riccardo ended on lap 34 when he could not prevent the McLaren from getting past and joining team mate Lando Norris.
On lap 38, disaster struck again for Verstappen as smoke and then fire appeared from his car and his engineer ordered him to stop immediately near Turn 2. The Virtual Safety Car (VSC) was activated to allow marshals to take action to remove the car. It was lap 40 when the VSC was deactivated and just prior to its activation, Russell was advised to not fight Perez so as not to damage his tyres, and he reluctantly let the Red Bull pass. So it was a Red Bull still second, though 12 seconds behind Leclerc. Verstappen’s fire was of concern to Perez who recalled how his own car had also died just after Verstappen’s in the first round. However, his engineer told him not to worry.
For Hamilton and Russell, running in third and fourth, the gap was not enough to make an effort to go for Perez so they focussed on tyre management to make sure that they finished the race. If bad luck hit the Mexican Red Bull driver, then it would be a bonus for them but for Leclerc, things were very much in control with a 14-second gap.
With 5 laps remaining, it appeared that the frontrunners had settled into maintaining positions to complete the race. Further back, Pierre Gasly was fighting hard to keep at least 10th place and stay in points as Lance Stroll and Guanyu Zhou kept duelling with him.
And so it was Ferrari’s day again as Leclerc crossed the line, a comfortable 20 seconds ahead of Perez, with the two Mercedes-AMGs in third and fourth.
China’s auto industry goes back many decades but it was only in the 1980s, as the country’s economy opened up, that the industry began to expand. Numerous new car companies were established, largely with government support to help them get going, and apart from joint-ventures with foreign carmakers, there were also many that developed on their own.
In the auto industry, the name of the game is numbers – to achieve the biggest volumes possible so that economies of scale can push production costs down. To build up to the critical levels, aspects like quality and safety may not be as high a priority as producing as many vehicles as possible. It’s a normal evolutionary process in the auto industry and once the critical annual volume is reached, then attention can be given to other areas as increasing profits provide the financial resources for more R&D.
So it’s not unusual that the early cars from Chinese companies had low quality and it should be remembered that the Japanese and Koreans also went through that phase. In the 1960s, when the Japanese cars started to sell in noticeable numbers in Malaysia, they were considered fragile and thought to be ‘made from Milo tin can materials’, which was really a myth. But in time, they improved quality and moved so far ahead as to lead the industry in that aspect.
For the Chinese carmakers, the 2000s were a time of rapid growth and getting into world markets. While their vehicles were selling well in China and there was then little emphasis on safety, the same was not the case in other countries. Safety standards were well established and independent organizations like Euro NCAP and Germany’s TUV and ADAC conducted assessments on new vehicles which included crashing them.
The severely damaged Landwind X6 tested by Germany’s ADAC in 2005 increased the negative perception of the passive safety of Chinese vehicles.
The early Chinese cars exported to Europe had poor ratings then, and a SUV model called the Landwind X6 showed a shocking result in Euro NCAP’s crash test in 2005 when it was so severely damaged that it got zero stars. Though testing by some other organizations suggested that it was not all that bad, the negative publicity became associated with cars from China.
The need for better engineered cars with better protection for occupants saw the establishment of safety standards by the China Automotive Technology Research Centre in 2006. This was the start of C-NCAP (China’s New Car Assessment Program) which would eventually adopt international standards typically led by Euro NCAP. There is now a Global NCAP organization which coordinates and assists national and regional organizations in this field.
NCAP tests are not required by law in any country, but their results are of interest to car-buyers who will be better informed of the level of safety a model offers. Manufacturers therefore aim to achieve the best result – 5 stars – for their new models. During development, they are made aware of the various requirements in the tests and engineer their vehicles to meet or even exceed those requirements.
Many new models nowadays can score the maximum of 5 stars but some get less either because of their design or because they may not have sufficient protective capability or features. In some cases, reduced equipment may also mean a lower score, but the vehicle will also cost less. So it is up to the buyers to decide whether they value their lives enough to pay the extra for better safety or settle for a less safe car and save money instead.
The NCAP requirements or protocols are constantly evolving and are periodically updated with tougher requirements as new technologies become available and also to push manufacturers to make their cars safer. Thus a model which may have scored well in 2003 might not achieve the same result today because the requirements have become tougher. For example, in 2008, Euro NCAP (and other NCAPs followed later) made it a requirement that Electronic Stability Control (ESC) must be present to be able to get 5 stars. If a model scored well in all areas but had no ESC, it would get only 4 stars. This basically forced the industry to make ESC a standard feature before long, providing motorists with better active safety.
Another example is the provision of airbags for both front occupants. This was promoted by ASEAN NCAP for models sold in the region and before long, manufacturers made dual front airbags standard across the range.
The upgrading of protocols is done in discussion with the industry to ensure that sufficient time is given for carmakers to improve their engineering or further develop technologies that will make it possible to meet new tests. There is also the cost factor as imposition of new technology too fast can make cars more expensive.
In the case of China, C-NCAP (which set standards) was behind the global NCAP standards at the start. However, by 2012, the protocols were upgraded to become close to what Euro NCAP had. For example, the main frontal offset impact speed was increased from 56 km/h to 64 km/h, and there was a general increase in the thresholds for injury scores of the dummies.
By 2018, the vehicles that were made in China and also the regulations set by the authorities were comparable to those in Europe. This meant that Chinese vehicles had safety standards that could be considered as world-class, with most of the models sold globally being able to match those from other makes.
A recent example of this achievement is with the latest HAVAL H6 from GWM (Great Wall Motors). The new SUV was given a 5-star rating by ANCAP, the NCAP organization for the Australasian region. Even more impressive was that the model had met ANCAP’s latest 2022 protocols which are tougher.
“This is GWM’s first new HAVAL SUV model to the Australasian market for a number of years. Delivering a 5-star vehicle to the market – against ANCAP’s latest 2022 protocols – demonstrates the brand has kept pace with the latest ANCAP safety standards and consumer safety expectations,” said ANCAP’s CEO, Carla Hoorweg.
The H6 achieved excellent results in 4 aspects – Adult Occupant Protection (AOP), Child Occupant Protection (COP), Safety Assist and Vulnerable Road-User Protection, with scores of 90%, 88%, 81% and 73%, respectively.
Details of the results showed that the H6 got a ‘GOOD’ grade in AOP. It has got a full score in tests such as side impact, oblique pole, whiplash protection, and rescue and extrication. In addition to the 70%+ high-strength steel vehicle frame, the vehicle is also equipped with an omnidirectional airbag that can effectively protect front and rear passengers from injury during a crash.
In terms of COP, the H6 also did very well. It received a full score in dynamic test (side) due to the lower ISOFIX anchorages and top tether anchorages installed in the rear seat. These further strengthen the connection between the childseat and the vehicle body, thus providing better safety protection for children.
Vulnerable Road User Protection is something which GWM would have given attention to earlier because C-NCAP had already been looking into it for some years now. The China In-Depth Accident Study (CIDAS) which was developed like Germany’s GIDAS identified that around 22% of serious crashes involved pedestrians. This led C-NCAP to also evaluate vehicles to rate how well pedestrians were protected in a collision.
The H6 also performed well in this aspect, thanks to features like an energy-absorbing space in the front bumper. Also, the Automatic Emergency Braking (AEB) system can detect pedestrians and cyclists ahead and automatically brake the car if the driver does not take action to prevent it.
The Australian Grand Prix of 2020 was the first Formula 1 event to be cancelled as a result of the COVID-19 pandemic, and it was a sudden cancellation, literally at the ‘eleventh hour’. The state government has forced its cancellation as the pandemic worsened and it started the ball rolling for other organizers to also cancel.
The Australian round has traditionally been the opening round of the season for many years so for the 2021 calendar, it was again placed at the start. However, the strict entry conditions at the start of 2021 made it difficult and uncertain for teams, so the organizers asked for their round to be postponed towards the end of the year when, hopefully, conditions would ease. But they did not (and would not till this year) and so the event had to be cancelled altogether.
This year, the Australian Grand Prix can finally be run although it could not regain its season-opening position and was scheduled as Round 3 of the 2022 Formula 1 World Championship. The circuit at Albert Park in Melbourne has changed and the entire track has been resurfaced. Some of the turns have been widened and a chicane has also been removed. The latter change is intended to provide a good overtaking spot, something which gives spectators the excitement to watch.
According to Brembo, the brake suppliers for all teams, it is one of those tracks with a medium level of difficulty for brakes. Since it is usually used for daily traffic, the track is slippery on Friday but, session by session, the asphalt is increasingly rubberized, also improving braking performance. This also translates into greater pad and disc wear, as they reach extremely high temperatures due to the increase in grip.
With the long experience Brembo has accumulated in Formula 1 since 1975 when they supplied to Ferrari, they have a range of solutions for the calipers that contribute to the heat dissipation of the entire braking system. One of these solutions is the Brembo pads with ventilation holes, something that is anything but simple to achieve because of their small dimensions and the materials the pads are made of, starting with carbon. Thanks to these holes, air circulation is greater and this staves off the overheating of the pads and the calipers themselves.
In 2022, the technical regulations ban having these holes in the pads in order to limit the cost of the component, but the teams are already on the hunt for cooling features that will improve this aspect without breaking any rules, such as fins or other processes to at least increase the exchange surface.
The minimum cornering speeds and gears used by the Mercedes-AMG drivers at Albert Park.
For Pirelli, the tyre people, there are a few unknowns because of the new track surface and changes, so past data cannot be entirely referred to. “There is a completely new generation of cars and tyres that the drivers are still trying to learn about. All these factors mean that there will be a lot of work to do for teams and drivers in the free practice sessions. We decided to opt for the step in the compound nominations because we noticed that there was a relatively small performance gap between the C3 and C4 compounds during development testing, and we believe that Albert Park – with its new asphalt and layout – is a good place to try out this option,” said Mario Isola, Pirellis’ Motorsport Director.
“We had to deal with a lot of new things compared to the last time that we raced here. The track is completely different from what it used to be: it’s definitely faster and the new tarmac feels totally different in terms of grip as far as I can remember,” said Ferrari’s Carlos Sainz.
The first two rounds of the championship have seen Ferrari and Red Bull Racing outpacing the Mercedes-AMG team. It’s still early days and the reigning champions are trying hard to address issues with set-up but still some way to go to match the pace of the frontrunners.
The Albert Park circuit is one of those where Lewis Hamilton has not had a notable record of wins (only two) even though he started from pole position a record 8 times. It is Michael Schumacher who has had the most wins with 4 wins, followed by Sebastian Vettel who has won 3 times. The McLaren team has had the most victories in Australia with eleven to date, with Ferrari having two less.
In 2020, as the COVID-19 pandemic kept people in their homes and racing activities came to a standstill, Lamborghini started a one-make championship online. Not surprisingly, the event known as ‘The Real Race’ was a success as driving enthusiasts took to racing virtually. More than 2,500 drivers from 109 countries participated in the first edition of the Lamborghini eSports championship.
Huracan GT3 EVO for all participants
The immersive competition had the Huracan GT3 EVO for use by all participants. Each car had exclusive race livery created by Centro Stile, Lamborghini’s in-house design department. Participants could customize the looks in 12 different versions, with each car displaying the trademark logos of long-standing Lamborghini Squadra Corse partners – Pertamina, Pirelli and Roger Dubuis.
The competition returned in 2021 with 10 races and a new and upgraded regional format. The new format had a more global approach as racers competed both in traditional Grand Prix and in three Endurance races to earn points within their regional tournaments in Europe, America and Asia. As in 2020, they all drove a Huracan GT3 EVO in Assetto Corsa Competizione, the advanced racing simulation game.
Assetto Corsa Competizione was developed alongside car manufacturers and provides a dynamic platform for Lamborghini’s latest racing series. It has photorealistic weather conditions and graphics, night races, motion capture animations, reaching a new standard in terms of driving realism and immersion. The game is also used by official Lamborghini Squadra Corse test and race drivers in their real-world preparations.
The winners of the 6-month long championship enjoyed a track experience with the Lamborghini Squadra Corse and a VIP experience at Lamborghini Headquarters. Additionally, the top-ranked player of each regional series would be invited to become a Lamborghini Official Sim driver.
Creation of a ‘factory team’
Lamborghini decided to create its own official team – a ‘factory team’, just as in real life competition – to build on the valuable experience gained with The Real Race. The eSports Team represents a further opportunity to expand the brand’s presence in a sector that is constantly developing, highly competitive, and also strengthen its commitment to the eSports scene.
The three sim drivers chosen to represent the brand in the major international eSports competitions are Jordan Sherratt, Gianfranco Giglioli and Giorgio Simonini. Sherratt (South African, 23) and Giglioli (Italian-Venezuelan, 24) will compete together in the GT World Challenge Esports Sprint Series Europe, and Simonini (Italian, 22) will join the pair to form the crew for the 2022 Intercontinental GT Challenge Esports Endurance Championship.
The Sprint calendar consists of 5 races and started last weekend with the Misano race. The last round is set for August 3, with the grand finale scheduled in the virtual version of the Autodromo Nazionale di Monza.
The Intercontinental GT Challenge Esports series starts next weekend (April 16) with the 12 Hours of Bathurst, the famous Australian endurance race. Here too, there are 5 rounds on the calendar, with the competition concluding on August 27 with the 9 Hours of Kyalami at the famous circuit in South Africa.
Support from Squadra Corse
The three sim racers have been training hard, sharing important information on driving and set-up. They will be supported during the season by the Squadra Corse staff who are dedicating a team principal, driver coach and engineers to offer their expertise in the development and analysis of telemetry data, from the track to the virtual simulation.
“Sim racing is an important platform in today’s motorsport scene. Videogames were born to allow those who didn’t have opportunities for real-life racing to be like the professional drivers. Now, after several decades of development in the industry, sim racing is getting closer and closer to its real-life counterpart. Moreover, sim racing is an additional tool for us to develop some of the fundamental aspects of real racing, such as car set-ups and software applications that will play an important role in the future of our brand,” said Automobili Lamborghini’s Head of Motorsport, Giorgio Sanna.
Even before its official launch (around the middle of this year), the next generation of Honda’s Civic Type R has started to collect records. As it goes through final development evaluation, test-drivers have been pushing it to the limits and in the course of one run recently, a new lap record for a front-wheel drive car was set at the Suzuka Circuit in Japan.
It lapped the 5.8-km track in 2 minutes 23.120 seconds, which was 0.873 of a second faster than the time achieved by its predecessor, a 2021 Civic Type R Limited Edition which was a development car.
The Suzuka Circuit, opened in 1962, is famous for its high-speed chicanes and challenging corners. It has hosted the Japanese Formula 1 Grand Prix for all but two years since 1987. Racing drivers regard it as one of the world’s greatest circuits and it has been a popular course for testing high performance Honda models.
Before the previous front-wheel drive lap record at Suzuka, Honda’s tenth generation Civic Type R GT broke the front-wheel drive lap record at the Nurburgring Nordschleife in 2017 with a lap time of 7 minutes 43.8 seconds. A production specification Civic Type R GT went on to break front-wheel drive production car records at 5 legendary European racetracks.
Though seemingly a good idea at the start in the 1990s, the original low-cost concept of Nicolas Hayek, creator of the Smart watches, never worked once Mercedes-Benz took over. The engineering costs bumped up the price and it became a niche product that had difficulty meeting ambitious sales targets.
After trying various approaches in the USA, a market it hoped would take to the little car, Mercedes-Benz ended sales there in 2019. It continued to sell the car in Europe and then Geely came into the picture to form a joint-venture and the brand gained a ‘second wind’.
Very quickly, a brand new product was developed with the involvement of Mercedes-Benz design teams who used the Geely’s SEA architecture dedicated to electric vehicles. By 2020, a concept car called the Concept #1 was revealed and this week, the production model has been presented to the world.
smart concept #1
This isn’t smart’s first EV as the brand went fully electric after 2019 but it is an entirely new product, simply called smart #1. While the crossover has blurred the lines between a hatchback and SUV, the smart #1 is presented as a SUV with an overall length of 4270 mm and a width of 1822 mm with a wheelbase that is 2750 mm. That makes it larger than the Proton Iriz and almost the same length as a Saga.
Although there have been smart concept cars that proposed a SUV design, the brand has never sold one so this would be its first SUV. It is, however, considered a city car as well because of its proportions although its weight of 1,820 kgs is certainly much more than city cars of the same size.
The weight largely comes from the NCM (nickel-cobalt-manganese) battery pack which also uses lithium-ion chemistries to store electricity up to a maximum capacity of 66 kWh. The charging system can accept fast-charging up to 150 kW and if that is used, charging time can be 30 minutes (from 10% to 80%), it is claimed. With a more common 22 kW supply, the time needed would be around 3 hours.
The battery pack powers a single rear-mounted electric motor with an output of 200 kW (272 ps) and maximum torque of 343 Nm, available almost from the moment the car moves off. The top speed is claimed to be 180 km/h, pretty fast for a car in this class.
The styling of the #1 is pretty much like that of the concept car with Matrix LEDs under the triangular shapes of each headlight. The headlights form a unique visual signature at the front which stretches right across, and the same feature is also present at the back.
To remove that tiny bit of drag-inducing turbulence that door handles cause, those on the #1 are flush when the car is on the move, extending only when needed to open the doors. It’s a feature usually found in higher-end cars, reflecting the premium positioning of the #1.
Thanks to a high footprint-to-space ratio with the long wheelbase, the interior is more spacious than would be expected with the compact exterior. The floating centre console provides better space efficiency with a reduction of elements creating a more open environment. To enhance this sense of spaciousness is a panoramic halo glass roof, one of the features on the concept car. The rear seats have a variable position over 13 cm and behind them is a variable boot space.
As with many of the latest cars, the displays are digi-graphic with a 9.2-inch panel in front of the driver (supplemented by a head-up display), and a 12.8-inch touchscreen on the dashboard. The ambient lighting can be customized with mix of 64 colours and 20 illumination levels, setting just the right mood for a drive.
The premium audio system has Beats high-end sound technology and consists of an amplifier module and 13 speakers (including a sub-woofer). The driver can enable digital key sharing through the smart app which also allows for remote engine starting.
There will be a ‘Launch Edition’ of the car with exclusive trim. Production will be at a joint-venture factory in China, starting in the second half of 2022. Exports are expected to start towards the end of the year so Proton Edar, which has been appointed distributor for Malaysia and Thailand, should be launching the car in early 2023. As it is a joint development between Geely and Mercedes-Benz, it is unlikely that it will become a Proton-badged model but by selling it, Proton would gain insights and experience into EVs which it will be producing and selling towards the end of this decade.
