Piston.my

Latest News

Roslan Abdullah has been appointed as the Vice-President of Sales and Marketing at Proton.  Concurrently, he is also appointed as the CEO of Proton Edar Sdn Bhd, a wholly-owned subsidiary of the carmaker which is involved in the distribution of Proton cars and providing sales and aftersales services to customers in Malaysia.

Having spent close to three decades in the automotive sector, Encik Roslan brings with him a wealth of experience and knowledge about Malaysia’s automotive landscape. His stint in the industry covered finance, operations and sales roles. Prior to his move to Proton, the Finance & Accountancy degree holder from the University of Brighton, United Kingdom, oversaw the operations of DRB-HICOM Defence Technologies Sdn Bhd (DEFTECH). He also spent many years as the President & Chief Operating Officer at Honda Malaysia.

BHPetrol RON95 Euro4M

His appointment will further strengthen Proton’s team to achieve its long-term goal and objectives, according to Dr. Dr Li Chunrong, CEO of Proton. “We are happy to welcome Roslan Abdullah to the PROTON family and we look forward to his positive contributions to Proton’s performance during this challenging period.

Click here for more news and articles on Proton.

COVID-19

PISTON.MY

The COVID-19 pandemic has certainly brought about changes in many ways, to the extent that we now have to adapt to what is known as the ‘new normal’. In the case of the car industry, dealers have now to follow new standard operating procedures to protect their customers as well as their employees.

Every dealership must now carry out temperature checks, provide and use hand sanitizers, practice social distancing, cashless payments and many now ask customers to wear facemasks as well. Understandably, there are still customers who are hesitant about going to a showroom, even if they have a new car to collect.

For such customers, Volkswagen Passenger Cars Malaysia (VPCM) has a new initiative under its Hands campaign whereby the handover can be done without them having to go to the showroom. It’s a new option where the new vehicle will be delivered to the home of the new owner.

For convenience and safety of customers
Erik Winter, Managing Director of VPCM, said that the initiative showed the company’s evolution in keeping up with the new shopping habits of consumers. “With the introduction of this service, we are closing the loop and making it easy for our customers to buy a Volkswagen from the comfort and safety of their own homes. It is as simple as selecting their preferred model on the eShowroom, finalizing the sales process and having the new car delivered right to their doorstep,” he explained.

VW delivery
If they prefer, customers will not have to go to the showroom to pick up their new Volkswagen and the dealership will send it to their home by a flatbed truck.

The service is available nationwide from all authorized Volkswagen dealerships up to a distance of 20 kms from the dealership serving the customer No, it won’t be Grab delivering the new vehicle nor will a sales consultant be driving it. It will be put on a single flatbed carrier truck and fully covered in canvas to protect it from damage. The customer will not have to pay for the service.

Adhering to strict safety guidelines, the carrier trucks are also cleaned and disinfected before and after each delivery, with drivers regularly checked and practicing COVID-19 safety measures. Owners will receive an SMS notification once their new car has been collected and is en route to their doorstep. As added safety measure, the owner’s Welcome Kit and car keys will be safely placed in the locked car.

Volkswagen Deep Sanitisation package
The Volkswagen Deep Sanitisation package uses a halal-certified bacterial spray and wiper disinfectant and includes deodorising and odour prevention.

Volkswagen Deep Sanitisation package
For owners seeking additional peace of mind, the Volkswagen Deep Sanitisation service package is now available, and starts from as low as RM80. The treatment package works to eradicate more than 99% of germs and bacteria in the cabin, including the air-conditioning system.

For more information, visit www.volkswagen.com.my.

Social distance

PISTON.MY

Volvo isn’t well known for sportscars although it has had such models in its history, the best known being the P1800 that gained worldwide fame in the TV series ‘The Saint’ in the 1960s. However, that was not Volvo’s first sportscar and before the P1800, there was a model called the P1900 Sport which was sold in 1956 and 1957.

The P1900 Sport project was initiated when Assar Gabrielsson, one of the two founders of the car company, visited the USA in the early 1950s to study the market. He saw that American motorists liked big sedans, which Volvo would produce and be successful at later on. At the same time, he noticed that there was a strong following for small sportscars from Europe. The Chevrolet Corvette also impressed him and he decided that Volvo should produce a small sports model.

1956 Volvo P1900 Sport

Although Sweden was not a place where convertibles were appreciated a lot due to its climate, Gabrielsson believed that there was a market for a small topless sportscar in other places, the USA being one of them. So he asked his engineers to come up with a platform which was adapted from the PV444 but instead of a steel body, it had a tubular frame on which a fiberglass bodywork was attached.

Volvo didn’t have the expertise in fiberglass so they commissioned a company in California called Glasspar which was a specialist in making fiberglass boat hulls and also kitcar bodies. Glasspar was also asked to come up with a design for the sportscar and coached with Volvo’s production people on the use of the lightweight material.

1956 Volvo P1900 Sport

Meanwhile, the engineers moderated costs by using many components from the PV444, adapting its 4-cylinder engine for the purpose. The engine had a 1.4-litre displacement and two carburettors, with modifications made to increase performance to 70 bhp/103 Nm. It was mated to a 3-speed manual transmission and hydraulic drum brakes were used all round.

The 966-kg car was 4.22 metres long with a wheelbase of 2.4 metres. The first running prototype was tested in 1954 and reached 155km/h.

1956 Volvo P1900 Sport

Not surprisingly, there were issues with the fiberglass body which cracked and fitting the doors properly was also difficult. The chassis was found to be weak and the transmission didn’t seem suitable for a sportscar (a 4-speeder was deemed too expensive at the time).

The issues were addressed and by the following year, Volvo showed off the new P1900 Sport to the media and dealers. It had set a production run of 300 cars for 1955 but production only started in 1956. Cars were exported to the USA (where it was priced at $US2,600), Brazil, Morocco  and South Africa but in the end, most were actually sold in Sweden.

1956 Volvo P1900 Sport

By then, a new CEO, Gunnar Engellau, was in charge and after spending a weekend with the P1900, he felt it lacked the high quality expected for the brand. Furthermore, the company was actually losing money on each car and so he ordered production to stop – after 68 cars had been built.

Engellau wasn’t against sportscars and started a new project which led to the P1800 and its ES derivative, this time using a steel body to avoid the issued with fibreglass. But it would be another 40 years after the P1900 that Volvo would offer another convertible, a variant of the C70, in 1997.

Volvo P1800
Volvo P1800 (background) and P1800 ES
1997 Volvo C70 Convertible
1997 Volvo C70 Convertible

 

Interstate travel restrictions will be eased from June 1, 2020 although the Conditional Movement Control Order (CMCO) remains active. There had been a ban when the Movement Control Order MCO) started in March, and in the period leading to Hari Raya, the prohibition was strictly enforced. Balik kampung journeys were not permitted as a measure to prevent the spread of the coronavirus.

Today, Senior Minister Datuk Seri Ismail Sabri Yaakob, spokesman for the National Security Council, said that interstate travel can be allowed for emergency cases as well as for spouses to visit their other halves who may be in another state. The latter was already mentioned by the Prime Minister earlier.

Additionally, those who work in another state can also cross borders but in all cases, police approval must first be obtained. “Interstate travel is not allowed unless it is for emergencies such as deaths or for medical reasons. We also allow those who need to travel between states for work. For instance, if you live in Seremban but work in Putrajaya,” he said.

During the CMCO prohibition on interstate travel, the police have set up 147 roadblocks nationwide to check on vehicles. Over 240,000 drivers were queried and those without valid reasons were made to turn around. In some cases, summonses were also issued for not complying with the CMCO, for which there is a fine of RM1,000 and possible jail term of 6 months.

The police have also been looking out for those who crossed borders without permission during the Hari Raya period and are now trying to return home. Roadblocks have been set up even on rural roads and many motorists have been caught trying to sneak through.

On another note, the Director-General of the Ministry of Health has said that use of facemasks is recommended when in crowded places. However, when travelling alone in the car, it is unnecessary to wear the facemask.

Although things seem like they are back to ‘normal’, the CMCO is still active and people are expected to remain at home as much as possible. Gatherings and visiting friends are still not permitted and as you will probably have already experienced, social distancing is now a requirement at public outlets. The authorities urge those who dine at restaurants to complete their meal as soon as they can and depart, rather than stay on at the table to chat.

COVID-19

PISTON.MY

After about half a year of intensive development work, the BMW M4 GT4 is set to make its virtual debut on the sim racing platform iRacing next month. To make sure that the BMW M customer racing car is as realistic as possible, iRacing developers are working as intensively with the BMW Motorsport engineers as if they were working on a real racing car.

In just a few days, the M4 GT4 will be another current BMW racing car after the M8 GTE to make its sim racing debut on the iRacing platform. When the users contest their first races in June, the iRacing developers and BMW Motorsport engineers will have a phase of intensive collaboration behind them.

iRacing BMW M4 GT4

Important project for BMW Motorsport
“I can’t wait for it to get started,” said Kevin Bobbitt, Director of Marketing at iRacing, emphasising “The openness with which BMW Motorsport met us in this project is fantastic. The communication channels were very short, and you could tell by their involvement that this project is really important to them.”

For some time now, sim racing has been one of the pillars in the BMW Motorsport portfolio. Those responsible had identified the potential of virtual racing before it experienced a boom during the current break from real-world racing. “BMW Motorsport knows the difference between a standard racing game and a real racing simulation, and values it,” said Bobbitt. “A simulation as realistic as this also benefits the manufacturer, because many more people can test the cars and in the best-case scenario might even go on to buy one.”

iRacing BMW M4 GT4

As head of vehicle development, Rudolf Dittrich is also responsible for the field of sim racing at BMW Motorsport. He confirms the strong customer focus behind the M4 GT4 project. “We want to give our customer teams the opportunity to experience the BMW M4 GT4 virtually,” he said, explaining the advantages: “They can upload and use their own liveries with their own sponsors. Their drivers can also practice on their own in the current break. And potential new customers might even develop a taste for it and think about racing with a BMW M4 GT4 in real life.”

How the collaboration works
Maximum authenticity requires the virtual car to be as close as possible to its real-life counterpart which was the joint mission of BMW Motorsport and iRacing. What do you need for that? “We need three things from the car: the laser scans, the CAD data and photos as a reference,” explained Brian Simpson, Senior Art Manager at iRacing.

iRacing BMW M4 GT4

Explaining the data transfer process, Dittrich said: “Everything starts with the licence agreement, which is the basis for the transfer of confidential data. Then the developers receive two large data packages of several gigabytes each. Firstly, the CAD data with all the specifications of the car parts. That is exactly the same data that a supplier gets from us to produce the real component. iRacing also scanned a real car, in this case the Turner Motorsport BMW M4 GT4.

“The second large data package contained all the information on driving dynamics. We use the same data set to do a lap time simulation or to operate our BMW Motorsport simulator, for example. This data includes damper curves, engine performance curves, axle kinematics, weight distribution, aerodynamic values: any figures that we had calculated for the car we passed on to iRacing,” he said, concluding that ‘iRacing now know as much about the car as our customer teams do’.

iRacing BMW M4 GT4

Real vehicle driving dynamics
“The more real vehicle data we receive, the closer we get to the real driving dynamics. In the case of our BMW M4 GT4, the initial feedback from people who have driven the real car is very positive,” said Steve Reiss, Senior Vehicle Dynamics Engineer at iRacing.

It goes without saying that the driving dynamic plays the crucial role in user satisfaction, but even the most minute of details are important for realism. “First, our designers parse the data provided and use it to make the basic car. Once we’ve got that, it’s time for the details such as spinning wheels, displays and much more,” explained Simpson. “

“In that respect BMW Motorsport is incredible. They even sent us information on in which situations which lights on the steering wheel come on, and what information is displayed when, which buttons the driver presses when, and what happens when they do. I really enjoy working on those displays right down to the last detail,” he added.

iRacing BMW M4 GT4

Ready to race
At the end of a continuous development period of about 6 months, BMW Motorsport inspect the virtual car which is also no different from reality. “The idea is to inspect the virtual car in exactly the same way as a real car,” said Dittrich. “This ranges from the external appearance, through handling, to details such as cable routing in the interior, light or texture of the dashboard. After all, we are ultimately responsible for the virtual BMW M4 GT4 meeting all the requirements that we and our customers have for a real racing car.”

Social distance

PISTON.MY

BHPetrol RON95 Euro4M

‘Mach 1’ – the speed of sound – would sound like a good name for any performance car, and Ford did just that for its high-performance variant of the Mustang when it was still in its first generation. The iconic fastback coupe debuted during the first golden era of musclecars, about 4 years after the Mustang was born.

The ’Mach 1’ badge was used only for the Sportsroof bodystyle, which was the name term Ford used for the fastback shape. Although having the same wheelbase as the other variants, the Mach 1 had extended front and rear overhangs and was longer than the other bodystyles.

1969 Ford Mustang Mach 1

“Mach 1 has always been that bridge between base Mustangs and the Shelby models,” said Ted Ryan, Heritage Brand Manager, Ford Archives. “From a style and handling perspective, the original Mach 1 managed to stand out as unique, even in the Mustang line-up – and as the name implies, it could really move.”

It was available during the first two generations of the Mustang line-up between 1968 and 1978 and then disappeared until the fourth generation offered a Mach 1 variant in 2003 and 2004.

Perfrmance-oriented limited edition
In early 2021, Ford will bring back the Mach 1 as an additional performance-oriented variant of the Mustang which is the world’s bestselling sportscar. It will have a naturally aspirated 5.0-litre V8 and be track-ready. From the pictures of the prototype, it appears that the new Mach 1 won’t have its own bodystyle but Ford says it will be a limited edition.

2021 Ford Mustang Mach 1

“Mach 1 has a special place in Mustang history, and it’s time for this special edition to claim the top spot in our 5.0-litre V8 performance line-up and reward our most hardcore Mustang enthusiasts who demand that next level of power, precision and collectability,” said Dave Pericak, Director, Ford Icons. “Like the original, the all-new Mustang Mach 1 will be true to its heritage, delivering great looks and as the most track-capable 5.0-litre Mustang ever.”

2021 Ford Mustang Mach 1

Like the earlier Mach 1 generations, the new model is expected to deliver performance and improved dynamics. Those early cars had upgraded suspension and brakes and it is likely that the 2021 Mach 1 will also have upgrades like Brembo brakes to uphold its performance legacy.

The latest Mustang is available in Malaysia at Sime Darby Auto ConneXion. Visit www.sdacford.com.my for more information

PISTON.MY

 

Archive

Follow us on Facebook

Follow us on YouTube