Someone in Honda must be a big dog-lover and made a good case for the company’s Japanese website to have a section dedicated to our furry friends. Of course, the company also associates Honda vehicles in various ways while offering tips and ideas on outings with dogs in the car. There are also articles for young children, advising them about safety and how to attend and care for dogs during a journey.
There’s even section where the ‘dog-friendliness’ of each Honda model is assessed, covering aspects such as getting in and out and the comfort levels. The assessments are done by different owners and provide insights into the useful features for those who bring along their dogs. For example, with the popular N-Box model, there are comments on the ease of attaching and positioning a specially designed doggie seat next to the driver.
Range of accessories for dogs
There’s also a range of accessories specially for dogs such as a dog seat, mat, lining cover and even straps to keep the dog inside the car. Needless to say, they are all designed to match Honda models. Paw stickers are also available as well as paw-themed covers for key fobs.
The Honda Dog accessories range recently got new additions for owners who want to show the world that their canine friends are really special. Owners can now install paw-shaped wheel caps on their vehicles. The caps are 54 mm and 63 mm in diameter and fit a wide range of original Honda wheels.
If you’re a dog owner, you probably have your furry friend putting his or her paw on your hand a lot. Now, while you’re driving, you can put your hand on a paw. Honda has a cover for the shift lever which is designed like a paw. It comes in three colours – white, black and ‘Shiba’, which is the colour scheme of the much-loved Shiba Inu of Japan.
Only for Japanese market
The Honda Dog accessories are available only for the Japanese market. Perhaps they will one day be offered in other countries as well, like the the tarik hooks (grocery hooks) which were introduced in Japan in the mid-1970s and eventually became accessories or standard items in many cars all over the world.
Some of the items in Honda Malaysia’s TEI merchandise range.
Honda accessories in Malaysia
For the Malaysian market, Modulo and MUGEN accessories are available for the various models, usually for inclusion at the time of purchase. There is also Honda TEI (Trust, Equality, Individuality) merchandise such as clothes, bags and even a sports hijab for women. They are available at authorized Honda dealerships nationwide or the Honda Malaysia Official Store at Shopee. For more information, visit www.honda.com.my.
Belgium will become the 35th country to host a round of the World Rally Championship (WRC) when the 2021 Ypres Rally Belgium is run. This should have happened last year but the event was cancelled due to the COVID-19 pandemic. It is the 8th round of the 2021 WRC and will take place next week (August 13 – 15).
Rally started in 1965
The Ypres Rally is not new and was in fact first run in 1965, 8 years before today’s WRC began. The event started one year after the town’s historic Market Square was chosen as a location for a time control during a Rallye Monte-Carlo concentration run. Since then, it has grown in stature, being a round of the European Rally Championship.
It is an asphalt rally and driving precision is a vital ingredient for a success. The farmland roads around Ypres are narrow and twisty, with many tight junctions. Brake too late or push too hard and a diversion into one of the many drainage ditches is often the result.
Corner ‘cutting’ is also commonplace, which results in mud and other debris being dragged onto the road. In the event of rain – a constant menace – an extremely slippery surface is created with the challenge multiplied on cobblestone sections.
New to most competitors
As well as being a new addition to the WRC calendar, Ypres Rally Belgium is new for many of the World Rally Car competitors. Only Thierry Neuville (who is from Belgium) and Craig Been have competed in Ypres before. Having won in 2018 and 2019 respectively, the Hyundai team-mates will be expected to set the pace when the 20-stage event begins.
“I’m really looking forward to Ypres. It hasn’t been in the WRC before but it’s a really legendary event that everybody in rallying knows about. In the test, we could already see that the conditions are tricky. Normally, the drivers are taking really big cuts and there is a lot of mud and dirt on the road, so the conditions can be really demanding and changeable,” said Kalle Rovanpera, winner of the last round in Estonia. “One of the key points going there for the first time will be to know where the grip is and to see how we can include that information in our pacenotes.”
Current WRC positions
The current positions in the WRC have TOYOTA GAZOO Racing’s Sebastien Ogier topping the chart. Having won 4 of the 7 rounds this year, the Frenchman has a 37-point over team-mate Elfyn Evans, with Neuville 15 points further back. Ogier is set to benefit from running at the front on the first pass through Friday’s sealed-surface stages, which are expected to be in a clean state.
With the WRC2 championship top five either not competing in Ypres or not eligible for points, several rivals have the opportunity to make up lost ground in the title chase. They include Nikolay Gryazin, who was a competitor in the ERC Junior Championship when he made his one and only Ypres start to date in 2016, plus Jari Huttunen and Oliver Solberg. The Nordic pair will be giving the Hyundai i20 N Rally2 its competition debut.
In WRC3, which has attracted 19 entries, Frenchman Yohan Rossel will be aiming to extend his lead at the top of the standings but faces strong opposition from a number of leading local drivers, many of whom have extensive Ypres knowledge. Among them are former Ypres winner Pieter Tsjoen, whose last WRC appearance was as a co-driver in Rallye Monte-Carlo in January, Belgian champion Adrian Fernémont and current Belgian championship leader Ghislain de Mevius.
The route
Located in the Flanders region of northwest Belgium, legs one and two follow ultra-compact routes north and south of Ypres respectively and comprise tight and twisty farmland roads lined by drainage ditches and telegraph poles. Following morning Shakedown, 8 stages – including the classic Kemmelberg complete with a cobblestone climb – are scheduled on Friday from early afternoon until late evening. Hollebeke, the rally’s longest stage at 25.86 kilometres, is run twice on Saturday August 14, while Dikkebus and Watou are among the Ypres favourites to also feature on day two.
The deciding leg on Sunday is all-new and located some 300 kms to the east with roads in and around the famous Circuit de Spa-Francorchamps, home of the Belgian F1 Grand Prix, providing the challenge. While they are more flowing in nature, they are not to be underestimated.
As far back as 1928, Daimler-Benz was already providing factory-fitted cars with special protective features against gunshots and explosives, for customers who required such protection. Later on, Mercedes-Benz also developed specially protected variants of its models and among those who ordered one was the emperor of Japan.
Many politicians and heads of state followed the emperor’s example and as demand grew, the company broadened the selection models with special protection. Though the volume was not big, it justified the establishment of the M-B GUARD division to handle the development and production of such special models, more so as a level of secrecy was also needed.
First GUARD limousine with AWD
The latest model from this division is the S 680 GUARD 4MATIC, the first GUARD limousine with all-wheel drive (there are AWD SUVs in the GUARD range as well). Apart from its superlative qualities as a limousine, it meets the highest ballistic test level for civilian vehicles and is particularly resistant to explosive charges. It has been certified to meet the requirements of the highest civilian protection class and also meets the requirements of Germany’s Federal Criminal Police Office.
Advanced dummies for testing
Details of testing are not released but during testing, the body and windows have been fired at by an assault rifle using armour-piercing ammunition. The S 680 GUARD 4MATIC achieved top scores in blast test on the roof, floor and sides. For the first time, the certification included tests with so-called biofidelic dummies. These are very sophisticated dummies with bone density and structure modelled on the human skeleton in every detail. Epoxy resin aluminium powder is used as a bone substitute, and webbing made of propylene is used as ligaments and tendons. The tissue and internal organs of the biofidelic dummy are made of silicone and acrylic. Thanks to the human-like structure, injuries are easily recognisable from the outside and allow more extensive evaluation.
Special equipment designed specifically for the model includes a fire extinguishing system with automatic triggering function and an emergency fresh air system that protects occupants from penetrating smoke or irritant gases and supplies fresh air. Other options include an extensive range of equipment for official authorities such as a siren, flashing lights and radios, as well as a panic alarm system. However, optional extras available for the standard car which contradict the protective purpose (such as a sliding sunroof) are not available.
Although the doors are very heavy due to their armouring, the electro-mechanical system is designed to keep operating forces low when opening and closing. This applies not only on level ground, but also when the car is on a slope. There is also a lot of intelligence in the hydraulically (instead of electrically) operated window lifters. Even if the on-board power supply fails, emergency operation is possible, ie closing in the event of an attempted attack. In each door, there is a corresponding unit consisting of a compressor and valve block together with a pressure accumulator.
V12 engine with 612 bhp/812 Nm
As for the powertrain, the V12 biturbo engine has already been extensively revised for the new S-Class generation. It has an output of 612 bhp/830 Nm which is distributed to all four wheels. Due to the higher vehicle weight, the AWD system of the GUARD version has stronger side shafts. The Michelin PAX run-flat tyres are standard and can be used for a distance of 30 kms after losing all air pressure.
“The S 680 GUARD 4MATIC is one of the most customer-oriented products from Mercedes-Benz. That is because this special protection model focuses on people and their safety,” said Dirk Fetzer, Head of Product Management S-Class. “No other series-produced saloon fulfils the highest protection class for civilian vehicles quite as comprehensively. And, at the same time, quality and durability are at series standard, thanks to extensive development and testing activities. The new special protection version ‘protects what matters’.”
Volkswagen has revealed another member of its all-electric ID family and this one’s a SUV coupe. The idea of a coupe-like SUV was introduced by BMW with its X6 in 2008 (although some feel the honour should go to the SsangYong Actyon of 2005) and has provided those who like coupes with something that can also double as a SUV.
Debut in concept form first
Volkswagen’s version will be the ID.5 GTX which will make its international exhibition debut next month – as a disguised concept – at the IAA Munich Motor Show. ‘GTX’ represents the Volkswagen brand’s new athleticism, continuing the tradition of the GTI, GTD and GTE models and transferring it to the world of electric mobility.
It will be the second model in the GTX line, joining the ID.4 GTX, and will give the company’s ACCELERATE strategy another boost. The goal is to increase the share of all-electric cars in Europe to 70% of Volkswagen‘s sales by 2030, on the way to becoming net carbon neutral by 2050.
Two motors for all-wheel drive
Full technical details are not available yet and for now, the company is only providing an overview. As with all the electric models, its first SUV coupe will sit on the Modular Electric Drive Matrix (MEB) platform. It will have 2 electric motors – one on each axle – to give all-wheel drive. The motors will receive energy from a large lithium-ion battery pack between the axles. The projected range with a fully charged pack is expected to be up to 497 kms.
The sporty profile of the ID.5 GTX has short overhangs and big wheels. At the front are the IQ.Light LED matrix headlights which generate an intelligently controlled high beam. The light strip that tapers towards the Volkswagen logo has been combined with three powerful, illuminated honeycomb elements on both the driver and passenger side. They complement the signature of the low beam and convey the athletic character even while stationary.
The flat sloping A pillars positioned right near the front give the roofline an elegant flow. It stretches low over the body and tapers out in an integrated rear spoiler. At the rear, horizontal lines accentuate the width, with the light strip attracting the most attention. The LED rear lights have a 3D design that provides a visual signature for the model.
ID.6 – largest model on MEB platform
The roll-out of ID models is not sequential (by the numbers) and an ID.6 has also been revealed for the Chinese market. This is a 7-seater SUV (shown below) based on the ID. Roomzz concept. It will be the largest model using the MEB platform with an overall length of 4880 mm.
ID.6 for the Chinese market is the largest model using the MEB platform for electric vehicles.
Throughout its history of over 100 years, the Morgan Motor Company has produced cars with unique classic designs, with the 3-wheeler model being perhaps the only unusual one. All the cars have been designed for road use although Morgan has a well documented history of competing in all-terrain endurance trials as far back as 1911.
Joint project with Rally Raid UK
Now the company has unveiled the Plus Four CX-T, which is capability never before associated with the brand. It will enable owners to travel on routes normally inaccessible by Morgan cars. It is the second of two special projects by Morgan in 2021, with the first being the Plus 8 GTR. For this project, Morgan partnered with Rally Raid UK, well known for building vehicles for the Dakar Rally.
Even in the early days of Morgan’s history of over 100 years, its cars were entered in cross-country events. The Plus Four CX-T (below) is intended to provide such experiences for eight owners.
Demonstrating new CX-Generation platform
One of the aims of the joint project is to demonstrate the capability and durability of Morgan’s new CX-Generation platform, along with the Plus Four upon which the CX-T is based. Just 8 vehicles will be built, each priced at £170,000 (almost 1 million ringgit) at Morgan’s factory with final preparation and set-up at Rally Raid own workshop facilities, both in the UK. Each customer will have the opportunity to work alongside Morgan’s design team to personalise their own CX-T, which will be delivered by the end of this year.
The exterior of the Plus Four CX-T is designed to maximise luggage and equipment carrying capacity, as well as provide the occupants protection necessary for extreme environments. Most prominently, the rear panel of the vehicle has been replaced with an equipment rack, with unique side body panels designed to be reminiscent of the classic 4-seater Morgan.
Features for off-road adventuures
The rack houses two ruggedised and waterproof Pelican luggage cases, a Zarges aluminium tool/storage box, two Rotopax 11-litre containers and two spare wheel/tyre assemblies. Additionally, for those who venture further off the beaten track, recovery equipment is mounted on the bodywork. All exterior mounting systems for storage and equipment have been engineered to be tough and easy to access when needed.
The external protective exoskeleton can also be adapted to carry leisure equipment such as bikes and surf boards, to complement the lifestyle activities of the owner. Removable side screens can be mounted onto the roof, allowing them to be carried unobtrusively in case of a change in weather conditions.
Conversion from Plus Four
In the initial stage of the project, Rally Raid UK undertook a complete study of the standard Plus Four vehicle with durability assessments of the platform, drivetrain, and suspension systems. The suspension has been designed to be expedition ready, tough and fit for purpose. Durability, and a drive-over obstacle clearance of 230 mm, has been achieved using modified Plus Six wishbones. These widen the track and allow for the extra arc of movement required to achieve the desired suspension performance. The wheel arch apertures have also been modified, allowing the suspension to compress deep into the wheel well, providing maximum traction and stability.
In addition to the main suspension hardware, the lower suspension arms contain bespoke bushes which further increase durability. The combined suspension package is optimised to undertake journeys never before attempted in a Morgan sportscar, while ensuring composure and comfort during any excursion into remote areas.
BMW xDrive differential
A 5-piece underbody protection system helps to protect the chassis and important components from damage when driving in extreme conditions. The car is also fitted with a full bespoke exhaust system with rear side-exit that improves the departure angle and contributes to the higher ground clearance. The Plus Four CX-T is fitted with a BMW xDrive electronic differential with 3 modes to vary the degree of differential lock depending on conditions.
In the cabin, features have been added for occupant comfort and usability in remote environments. The cabin is enclosed within a composite hardtop which is unique to the Plus Four CX-T and has been intricately engineered to fit between the internal and external roll cages.
A RAM mount track is built into to the dashboard to allow the secure fixing of a variety of devices such as smartphones or cameras. A flexible map light, pencil and notebook holder have also been integrated, all designed to withstand operation in harsh driving environments.
Cabin stowage has also been optimised with the addition of a removable map/document holder and insulated cool bag, both located in the passenger footwell. A custom-made first aid kit is mounted to the internal roll cage behind the seats.
Porsche Exclusive Manufaktur (PEM) , a department within the sportscar company, offers services to personalise and create exclusive versions of the various Porsche models. Being part of the company, it has access to all the engineering information as well as the expertise and technology to customise cars individually. From the first custom Porsche 356 in 1950 to the numerous models in today’s range, PEM can make subtle changes or extensive modifications as required by customers.
The 911 Targa 4S Heritage Design Edition is one of the special models developed by PEM. Based on the new 992 generation 911 Targa, it has design elements influenced by the 1950s and 1960s. Many of the elements, inside and outside, have been reinterpreted and combined with the latest technology by PEM.
Classic colours and graphics
The Cherry Metallic exterior colour exclusive to the 911 series brings to mind the style of the 1950s in a modern interpretation. Alternatively, two solid colours (Black and Guards Red), a metallic colour (GT Silver Metallic) and a special colour (Crayon) are also available. There are also other colour choices for those who want something that is more unique.
A striking design feature is the ‘Spears’ motorsport graphic on the front wings which are high-quality white livery elements in the shape of a spear. These ‘spears’ recall the early days of Porsche motorsports history, when the racing cars were painted after collisions to hide any marks. Later, the spears were used as a kind of ‘warpaint’ and became one of the first design elements customers used to personalise their vehicles.
There are also motorsport graphics with a historical design on the sides of this special model, conveying a high level of recognition of the 911 Speedster Heritage Design package of 2019. The sporty look can be supplemented by race numbers from 0 to 99 on request.
There’s also gold-coloured lettering at the rear and on the Targa bar, as well as the historic Porsche crest on the wheel hub cover and the bonnet. The Heritage Design Edition comes with 911 Carrera Exclusive Design wheels in high-gloss black (or, optionally, in platinum satin gloss) in 20-inch or 21-inch sizes and black-painted brake calipers with the classic look. Other design features include the Porsche Heritage badge on the luggage compartment grille and silver sports tailpipes.
The 20-inch and 21-inch wheels are designed in the shape of a wing, or cloverleaf, and are reminiscent of the legendary Fuchs wheels that were first used on the 1967 911 S.
Corduroy comeback inside
The snug cabin has brushed aluminium panels bearing the words ‘911 Targa 4S Heritage Design Edition’ with Heritage Design floor mats as a matching detail. The Bordeaux Red 2-tone leather upholstery and Atacama Beige OLEA club leather (black is also available) were designed exclusively for this edition. Customers can also choose two-tone leather upholstery in Black and Atacama Beige.
Corduroy, a fabric already used in the 356 model, makes a comeback and brings the fashion style of the 1950s back to life. This soft ribbed fabric is used on the centre panels of the seats and in the door panels. The interior appointments are rounded off with perforated Alcantara in Atacama Beige on the headlining and the pillars.
Historical bonds of instruments
The instrument panel with 2 high-resolution 7-inch displays creates historical bonds in various ways. One is the classic pointer on the analogue tachometer. When the engine is started, the colour of the hands and digits changes from white to green. The equally green scale lines are derived from the 356. The clock from the standard Sport Chrono package on top of the instrument panel also has green digits.
Each owner gets the car key painted in the exterior colour and a key pouch made of 2-tone leather, also enhanced with the historical Porsche crest. The leather document folder and the specially designed indoor car cover underline the vehicle’s aim of being a true collector’s item.
Same powertrain as latest 911 Targa
The powertrain, chassis, and driver assistance systems are similar to that found with the latest new 992 generation 911 Targa. It is powered by a 2981 cc 450 ps/630 Nm biturbo 6-cylinder boxer engine which, with the 8-speed dual-clutch transmission, can propel the 911 Targa (with Launch Control) from 0 – 100 km/h in less than 3.6 seconds on its way to a top speed of 304 km/h, it is claimed.
The 911 Targa 4S Heritage Design Edition is now available from Sime Darby Auto Performance (SDAP). With the sales tax exemption (till the end of 2021), it is priced from RM1,677,409 (excluding insurance).
“We’re bringing back our iconic looks from different eras and proving that Porsche stays true to its roots, even in the age of electrification. The 911 Targa 4S Heritage Design Edition evokes the memories of the 1950s, 1960s, 1970s, and 1980s and translates these elements into a modern-day sports car that excites Porsche customers through the lifestyle dimensions,” said Christopher Hunter, CEO of Sime Darby Auto Performance.
First Classic Partner Centre in Malaysia
“In addition to the arrival of the new 911 Targa 4S Heritage Design Edition, Porsche Centre Johor Bahru will be the first Classic Partner Centre in Malaysia and is scheduled for opening at the end of this year. This will further enhance the customer experience where Porschephiles can now refurbish and upkeep their classic Porsches at this new facility,” Mr. Hunter added.
