Home - Piston.my

Piston.my

Latest News

Hyundai’s Head of Design talks about the Vision T Concept (w/VIDEO)

In the fourth quarter of year, Hyundai Motor displayed the Vision T concept, first revealed at the Los Angeles International Auto Show. The model gave a preview of some of the styling ideas that the Korean carmaker is exploring and recently, the Head of Hyundai Design, SangYup Lee, presented a deeper look at the concept.

In the video, he explains the key characteristics of the car’s design: dynamic architecture, sharp edges and straight lines, and geometric design features called ‘parametric dynamics’.

He first draws attention to Vision T’s sporty stance, which can be seen in its low bonnet, short front overhang and wide wheelbase. He then goes on to explain the parametric dynamics: a chiselled surface, a combination of soft surfaces and hard lines, and sharp, geometric edges. The car’s architecture is compared to a mineral or a crystal which has been struck by a hard object and then shattered.

Geometric patterns in the front grille, including hidden headlamps, give a jewel-like quality. When the car is in motion, the air intake flaps actually move, so the vehicle almost seems more like a living animal rather than a static machine.

The integrated architecture ensures a continuity throughout all elements of the vehicle, such as the hidden headlamp design which is repeated in the taillights.

“We really wanted to create Vision T as the most avant-garde, the sportiest, freshest CUV. The most dynamic CUV as a vision that we wanted to introduce,” he says.

Vision T represents one step in the evolution of Sensuous Sportiness, Hyundai’s signature design identity. Hyundai concept cars do not stand alone – they inform the design direction of future Hyundai models, which encompasses both concept and production cars.

Aspects of Vision T such as the sharp angles and straight lines can clearly be seen in 45, an earlier concept car. While the connection to Prophecy, the company’s most recent concept car, is less apparent, all three models are united under the Sensuous Sportiness design identity.

7th Generation Hyundai Elantra makes its global debut online from Hollywood

Bermaz Motor creates limited edition Mazda CX-3 to celebrate brand’s 100th anniversary

100 years is a special milestone in any history and for Mazda, it is of course especially significant. To celebrate this 100-year anniversary, the carmaker has many activities, among them, a 100th Anniversary Special Edition series of models. Unfortunately, yjpugh they are offered in Japan and selected markets, they will not be available in Malaysia.

Nevertheless, Bermaz Motor, which handles the Mazda brand in Malaysia has created a special limited edition Mazda CX-3 to commemorate the occasion. Developed by the company’s MazdaSports Division, the limited edition crossover SUV features various enhancements that gives the car a unique styling and design with a high sense of sophistication.

Exlusive Snowflake White Pearl finish
For a distinctive sportier look, the limited edition CX-3 is fitted with a Front Lip Spoiler & Rear Bumper Diffuser. The body features a two-tone finish with a Piano Black Roof and matching rear boot spoiler. Only a Snowflake White Pearl colour is available.

The 18-inch alloy rims are finished in gunmetal while the rear exhaust tips have a brushed aluminium finish.

Within the SUV, the styling enhancements added to the seats, steering wheel, armrest and gearknob are in the form of a dark gray suede finish to match the dashboard and door trims. There are also brushed aluminium sports pedals and scuff plates. Black carpet mats are also provided, exclusive to this limited edition. A JBL Basspro Hub 11-inch Subwoofer is included and this delivers fast and tight, deep bass with low distortion.

Sharper driving experience
Other functional enhancements include a front strut tower brace that covers the engine as well as lower front, mid and rear chassis bars for a sportier, sharper driving experience.

The CX-3 Limited Edition is priced from RM14,500 and bookings can be placed at any authorised Mazda outlet. The accessories fitted have a 1-Year Mazda Genuine Accessory Warranty based on the period of fitment at the time of new vehicle purchase. Deliveries will start from the end of July 2020.

Visit www.mazda.com.my to locate an authorised Mazda outlet or to know more about Mazda models available in Malaysia.

Unusual, little known Mazda vehicles you may never have heard of

Yes, Waze MOTORCYCLE and CAR modes can give you two different routes.

Remember the recent case of the motorist driving along the motorcycle lane by the side of the highway? The police managed to identify the owner of the Volvo XC90 and after investigation, they said that he explained that his Waze GPS route navigation service was set on MOTORCYCLE mode. As a result, the route which he had wanted included travelling along a motorcycle lane next to the highway.

Some people were skeptical about this excuse and suggested that GPS is not so accurate that it can separate the motorcycle lane from the highway that a different route can be shown. They felt he gave a lame excuse.

We tested his explanation by asking Waze to provide a route from one location to another, first in PRIVATE CAR mode and then in MOTORCYCLE MODE. For most of the route, the route used the same road as cars but in areas where the was a motorcycle lane – eg alongside the federal Highway in Petaling Jaya, Selangor – the route for MOTORCYCLE mode went along the motorcycle lane. This was clearly indicated on the map with the two sides of the highway shown and the route going along another road just next to it.

Of course, any motorist should have realized he or she was on a motorcycle lane (and with that SUV he was driving, he could have just crossed over to the right and onto the highway) but it could be that the driver did not drive much and was not familiar with the roads. Or the phone he was using was his son’s who is a Grab rider. That is no excuse, of course, as there would be signs to indicate the motorcycle lane and motorists should be aware.

*Waze users can select different types of vehicles before they ask for route navigation.*

There have been similar cases in the past of motorists driving along the motorcycle lanes. These have been known to be deliberate and either the drivers were doing it ‘for fun’ or they were trying to jump queue to get ahead of a jam. Not nice for motorcyclists, not to mention a danger to them too.

As for the GPS system, this shows how accurate it is these days. Back in the 1990s, when the US allowed civilian devices to receive GPS signals from its satellites, it was not as accurate for the civilian devices compared to those used by the military. The US deliberately made the signal less accurate with ‘Selective Availability’ to prevent civilian devices from being used for targeting weapons.

GPS devices — *Route navigation systems for vehicles get signals from the GPS network around the planet. They can be received by built-in systems in cars as well as portable devices like watches.*

‘Selective Availability’ was stopped by President Clinton in May 2000 and at that time, it was still 5 metres accuracy. This meant that if two points were less than 5 metres apart, the separation could not be shown. Over time, the accuracy improved and since 2018, accuracy is said to be possible to 30 cm. That means you can show individual lanes on the road whereas 20 years ago, you could only show the whole width of the highway.

The accuracy will be very important when autonomous vehicles start to be used widely. Their on-board navigation systems will need to be able to pinpoint junctions and other turning points very accurately to avoid accidents.

Autonomous cars — Future cars that operate autonomously will require very accurate data on their location on the road to ensure they are guided safely.

Anyway, back to the case of the motorist who was on the motorcycle lane. It is best to not completely rely on Waze or other GPS navigation as you drive. There are funny incidents of people who somehow trusted their route guidance so much that they ended up on a river! Use your common sense and pay attention to signs.

The Mulsanne chapter in Bentley history ends

After more than a decade in production, the final Bentley Mulsanne has been completed. During that time, more than 7,300 handcrafted units have been produced of what is undoubtedly the ultimate luxury sedan.

The Mulsanne’s lineage, which comes to an end, can be traced back through Bentley’s history, from the original 8 Litre of 1930 – the last car designed and developed by W.O. Bentley himself – as the most luxurious, coach-built Bentley of its time.

The final unit is a Mulsanne Speed ‘6.75 Edition by Mulliner’ finished in Rose Gold over Tungsten. It will soon be on its way to a lucky customer in the USA. However, it has also been revealed that there is one extremely special unit, a final Mulsanne but its future home remains a closely guarded secret.

A true icon
“The Mulsanne is the culmination of all that we at Bentley have learnt during our first 100 years in producing the finest luxury cars in the world. As the flagship of our model range for over a decade, the Mulsanne has firmly solidified its place in the history of Bentley as nothing less than a true icon,“ said Bentley Chairman & Chief Executive, Adrian Hallmark.

“ I am immensely proud of the hundreds of designers, engineers and craftspeople that brought the Mulsanne to life over the last ten years. Now, as we begin Bentley’s journey to define the future of sustainable luxury mobility through our Beyond100 strategy, the role of Bentley flagship is passed to the new Flying Spur.”

In the last 11 years, over 700 people have invested nearly three million hours crafting Bentley’s ultra-luxury sedan. Producing the Mulsanne bodies required approximately 42 million spot welds, and creating the sumptuous leather interiors took more than a million hours alone. Nearly 90,000 hours have been spent polishing cars, before a total of over four million individual quality checkpoints.

Mulsanne 6.75 Edition by Mulliner
In 2020, the final series production cars formed the unique ‘6.75 Edition by Mulliner’ signifying the end of Mulsanne’s reign. Taking its name from the legendary 6.75-litre engine which, this year, also came to the end of production after more than 60 years, the ‘6.75 Edition’ was limited to only 30 units.

How Bentley ensures the highest quality for its cars

Update on fuel prices – June 27 to July 3, 2020

Sime Darby Auto ConneXion offers Home or Office Delivery Test Drive

For a long time now, it’s been a ‘buyers’ market’ rather than a ‘sellers’ market’ and car companies have been trying different ways to draw customers to their brand and products. Sales and aftersales services and facilities have been raised in quality and customers who visit showrooms may be pampered with food and drink, besides a very comfortable environment.

However, in this time of reduced showroom traffic, the car companies are going further in reaching out to customers. For example, Sime Darby Auto ConneXion (SDAC) is enhancing its customer services by offering to bring new models to the customer’s home or office for a test-drive.

Added convenience for interested customers
The Home or Office Delivery Test Drive provides convenience to customers who may be busy or just don’t wish to travel to the showroom. The service is available within a 10-km radius of the customer’s chosen dealership.

To arrange for the test drive delivery, customers can either contact a Ford dealership nearest to them, submit an online test drive request via the SDAC-Ford website, or send a message to the Ford Digital Salesperson on the WhatsApp sales line at 019 204 1200.

“During this period, we understand that customers are in search of additional services for added convenience. That is why we are providing an additional option of delivering our test drive vehicles to our customers home or office to show our commitment of continuously enhancing our customer support and service,” said Syed Ahmad Muzri Syed Faiz, MD of Sime Darby Auto ConneXion.

Precautionary safety measures will be practiced by the sales consultant upon delivering the test drive vehicle. This includes the use of a face mask, recording of body temperature and sanitising the vehicle. The sales consultant will also be seated at the back to adhere to the current social distancing practices.

Showroom visitors welcome too
“Of course, customers are still welcome at our showrooms. For those who prefer to visit a Ford dealership, they can be assured that the necessary safety precautions to ensure health and safety are being practiced. This includes social distancing, temperature checks upon entering the premises, hand sanitiser dispensers located in the showrooms and frequent sanitising of high frequency touchpoints,” added Tuan Syed Ahmad Muzri.

Other existing touchpoints to assist customers in getting in touch with SDAC include the website chatbot to assist users on website navigation, Customer Care and Road Assist service line which is available 24/7 at 1300 38 3181, online book a service appointment, and submission of enquiries and feedback via the SDAC-Ford website.

Visit www.sdacford.com.my to know more about the Ford models available in Malaysia and the locations of dealerships throughout the country.