Following earlier reports that ferry services in Penang for 4-wheeled vehicles will be discontinued after the end of this year, the government has stepped in to provide funds to enable them to continue. RM30 million will be given to Penang Port Sdn Bhd which operates the remaining two ferries for maintenance and repairs.
The announcement of the end of the 126-year old ferry service drew public criticism as the ferries are considered iconic symbols of the island. However, due to their age, the remaining two ferries have been proving to become costly to maintain so it was decided to stop using one of them while the other would only be for motorcycles and bicycles for 6 months. Pedestrian ferry services would also be provided on speedboats pending the supply of larger and faster boats in July 2021.
Click on the link below to read out earlier story on the ferry services being stopped:
In the past week, you would have noticed an unusual post in your social media feeds which advised you to set aside whatever you planned to do on the evening of December 17. The message was from UMW Toyota Motor (UMWT) which said that they have a surprise to announce.
Well, it is December 17 and if you are curious to know what the exciting news is all about, be at UMW Toyota Motor’s Facebook,YouTube or Instagram pages at 7:30 pm tonight.
“Whatever you’re doing on 17 December 2020 – IT CAN WAIT! We have surprise to share, and let’s just say that there’s a bit of something for everyone to appreciate especially after what has been an incredibly challenging year for Malaysians on all fronts ,” said Ravindran K., President of UMW Toyota Motor.
“In many ways, what will be announced during the online event tonight will be an industry first for Toyota, and will be the foundation to ushering in an exciting 2021,” he hinted.
The company statement has not revealed what will be revealed or announced. Given how the company has been increasingly active in motorsports, it could be something related to motorsports (a new series?). In fact, recent teasers have mentioned ‘a newborn’ so it could even be a new sporty model as a helmet is shown.
Not only has UMWT been having racing events like the one-make Vios Challenge series but it is also providing serious training for a new generation of racers, as the video below shows.
UMWT’s Deputy Chairman, Akio Takeyama, said the brand seeks to ramp up its involvement, activities and programs in an even bigger and meaningful way in 2021. “The full details will be disclosed tonight but suffice to say we are going big!” said Mr. Takeyama, who is also the company’s Chief Motorsports Officer and participates is the Vios Challenge.
“At Toyota, we do not just build cars, we build people. Developing exceptional people is Toyota’s Number 1 priority. Reflecting on the challenges of 2020, I have seen this same spirit being manifested to bring out the best in Malaysians who have demonstrated strength, perseverance and determination in overcoming what has undoubtedly been a very difficult 2020. Now, it is time to move forward!” he said.
Sime Darby Motors has been building up its portfolio of automotive and automotive-related brands for many years, and today represents 31 brands in Asia and Australasia. Some 20 years ago, the Sime Darby unit tried to establish a shared approach for its brands but at that time, conditions were different and the idea was not so viable.
Today, that vision has been realised with Sime Darby Motors City in Ara Damansara, Selangor, where a number of brands are housed with sales and aftersales facilities available. Then Sime Darby Auto Selection was established to offer pre-owned vehicles, with an online channel as well.
For post-warranty vehicles
Now Sime Darby Auto Selection has also opened a multi-brand service centre, as part of the company’s strategy to offer a new aftersales service alternative, at a price point competitive with independent workshops, for post-warranty vehicles.
Located in Glenmarie, Selangor, the service centre offers owners the same quality of service provided by brand-specific authorised service centres. Utilising state-of-the-art equipment, the purpose-built facility is able to service and maintain vehicles of various brands. It has highly-trained and skilled technicians who can provide quality workmanship.
“The opening of this new after-service facility is very timely to meet the changing demands of car owners, who are always on the lookout for alternatives after their car warranty expires. With this one-stop service centre, car owners – especially those with different car brands – will enjoy the convenience of a one-stop service centre that offers high quality service, at an unrivalled price,” said Jeffrey Gan, MD for Retail & Distribution, Sime Darby Motors Malaysia.
“Customers today are more knowledgeable and aware of the changing trends in the market. With the new and innovative Sime Darby Auto Selection Service Centre, we hope to instil customer confidence so that this becomes their go-to centre for all their vehicle maintenance needs,” he added.
Various services available
Apart from basic services such as engine oil replacement, tyre alignment and balancing, air-conditioner and car disinfection service, the service centre also offers repairs, car washes and vehicle inspections.
The 4,117 square foot facility has 6 service bays and an environment for customers to wait comfortably. Those unable to personally send in their vehicles can also arrange for pick-up and delivery service. It operates 6 days a week from Monday to Saturday.
Collaboration with SpareXHub
Meanwhile, Sime Darby Motors Malaysia has also teamed up with SpareXHub to offer vehicle owners an additional avenue to purchase genuine automotive spare parts at competitive prices. The collaboration with the genuine spare parts e-commerce platform gives customers the ability to source, order and purchase original automotive spare parts of their preferred brands via a one-stop contactless platform from the comfort of their home or office.
Some customers of Lamborghini are not satisfied buying the production models that are manufactured in a number of units. They want true exclusivity (and can pay for it) with a car that is completely personalized to their wishes. The project to meet such a demand has seen the creation of the SC20, a unique specimen of an open-top track car type-approved for road use.
Second one-off model
The SC20 is the second one-off model engineered by the carmaker’s motorsports department, Lamborghini Squadra Corse. It brought to reality a customer’s dream car and the customer was also involved in the project from the very first drawings by Lamborghini’s designers.
The common goal was to build a unique vehicle, extreme in its design and performance, and able to combine aerodynamic solutions taken from racing Lamborghinis incorporating unprecedented lines and exclusive details.
“Two years after the SC18 Alston, the SC20 was a new, intriguing challenge. The chief sources of inspiration were the Diablo VT Roadster, Aventador J, Veneno Roadster and Concept S, and the result is a dramatic combination of creativity and racing attitude,” explained Mitja Borkert, Head of Design Lamborghini Centro Stile.
Inspiration from racing Lamborghinis
The carbonfibre body was polished and slicked down by hand by the Lamborghini aerodynamic engineers to deliver optimal airflow for both performance and the cockpit’s occupants, ensuring comfortable open-air driving even at high speeds. The pronounced front splitter is framed by two fins and the air intakes on the bonnet are inspired by those of the Huracan GT3 EVO.
The sculpted body sides reflect the solutions adopted on the Essenza SCV12, and the muscular rear is topped by a large carbonfibre wing that can be set in three different positions: Low, Medium and High Load.
Exclusive details
The SC20 features exclusive details starting from the body colours on a Bianco Fu (white) base, created for the customer, on which the Blu Cepheus (blue) livery stands out. The same shade is found in the interior, alternating with Nero Cosmus (black) and Bianco Leda (white).
The most significant element of the passenger compartment is the visible carbonfibre used for the dashboard cover, rear wall, door panels, centre console and steering wheel trim, in addition to the monocoque. The lightweight material is also used for the shells of the seats upholstered in Alcantara and leather. The door handles on the other hand, are machined from solid aluminium. Lastly, the air vents are created using 3D printing technology at the factory.
“The SC20 is a combination of sophisticated engineering, Italian craftsmanship, sportiness and advanced design. It is also an example of applying our V12 engine and carbonfibre to a radical open-top vehicle that unmistakably carries the Lamborghini DNA,” said Maurizio Reggiani, Chief Technical Officer of Automobili Lamborghini.
Its engine is based on Lamborghini’s flagship V12 – the 6498 cc 12-cylinder that delivers 770 ps at 8500 rpm and 720 Nm of torque at 6750 rpm. It is managed through the optimized 7-speed Independent Shifting Rod (ISR) gearbox. The power reaches the four wheels through a 4-wheel drive system with a central electronic differential. To give the required grip are Pirelli PZero Corsa tyres are mounted on single-nut aluminium rims, 20 inches in front and 21 inches at the rear.
“The SC20 is one more technical and styling exercise that associates Squadra Corse experience with Lamborghini design, masterfully interpreted by our Centro Stile based on the customer’s wishes, which was the focus of the project during the entire vehicle development and construction process,” said Giorgio Sanna, Head of Lamborghini Motorsport.
Edaran Tan Chong Motor’s new Nissan Almera Turbo is beginning to appear on roads around the country in increasing numbers as new owners take delivery of their cars. Apart from the fresh new styling and turbocharged powertrain, the new Almera is also packed with many safety technologies which can contribute to helping reduce road accidents.
Nissan Safety Shield 360
These are the Nissan Safety Shield 360 technologies that work together to provide safety monitoring and intervening to prevent accidents when necessary. This follows the trend in the industry whereby driver assistance systems are being provided which use camera imagery as well as radar sensors to scan the road ahead. Additionally, there are sensors to scan the sides for vehicles in the blind spots, and towards the rear to aid reversing.
Standard on all Almera Turbo variants are the Intelligent Forward Collision Warning (IFCW) and Intelligent Forward Emergency Braking (IFEB) systems. The IFCW, operational at speeds between 5 km/h and 80 km/h, monitors the road ahead and alerts the driver when the car is too close to a vehicle ahead or there is a risk of collision.
Intelligent Forward Collision Warning ensures that a safe gap is always maintained when there is a vehicle ahead.
The alert is shown on the 7-inch Advance Drive Assist Display (ADAD), along with an audible alert. This means the driver should take steps such as decelerating or even braking to avoid the collision. However, if the driver does not take these actions, then the system will take over and activate the brakes automatically.
The early braking should prevent a collision or at least reduce the speed so that the severity is less, which can make repair costs less expensive. The brakes will remain locked for about 2 seconds after the car stops moving before being deactivated.
Alerting drivers behind
Incidentally, the Almera brake system has an Emergency Stop Signal function which can help to reduce rear-end collisions. If the brake pedal is pressed hard and suddenly, the hazard warning lights will come on automatically (besides the brake lights, of course). This will alert drivers behind that the car is decelerating very quickly under braking as they might not notice it right away. This will prompt them to also brake and slow down, and it could prevent the sort of multiple accidents on highways that we read about.
Watching the sides and rear
Other safety technologies available are the Blind Spot Warning (BSW) and Rear Cross Traffic Alert (RCTA) systems. BSW is available from around 32 km/h and uses sensors to keep an eye on blind spot areas at approximately 3 metres x 3 metres towards the rear sides of the car. If the turn signal is activated and a vehicle is detected, the drive will be warned by sound as well as warning indicators on the ADAD and the relevant side mirror.
RCTA is a more recent safety system that is slowly appearing in cars. It is useful during reversing out of a parking bay when the driver’s view of either side might be blocked. The same rear radar sensors help to detect an approaching vehicle on either side and warn the driver with an audible alert and indicator on the side mirror where the vehicle is approaching from. This warning could help save an expensive accident!
Parking made easy
The Almera Turbo driver is also assisted by the Intelligent Around View Monitor (IAVM) with Intelligent Moving Object Detection (IMOD). This system (also offered in the X-Trail, Serena S-Hybrid and Navara) not only helps make parking easier but also watches out for moving objects nearby so that an accident does not occur.
The IAVM uses 4 tiny cameras installed on the bodywork and with the use of a computer program, the images are combined to create a simulated view of the car from above which shows all sides. It’s like having a drone overhead sending a video view to the display on the dashboard. The simulated image is detailed enough to show obstacles on the ground so the driver can avoid them and position the car precisely inside the parking bay.
Needless to say, the Almera Turbo has all the usual Active Safety systems like ABS with Brake Assist, Vehicle Dynamic Control with Traction Control, Electronic Brakeforce Distribution for balanced braking performance, and Hill Start Assist to enable confident moving off on slopes.
“The all-new Nissan Almera Turbo takes the popular B-sedan to a new level of refinement and enhancements not usually found in this segment. With the theme ‘Challenge All Beliefs’, the all-new Nissan Almera Turbo is not the Almera everyone knew before. It is completely redesigned to be energetic, provocative and engaging with its dynamic styling, confidence-inspiring performance and innovative technologies, that sets to challenge customers’ beliefs on what modern sedans should be,” said Christopher Tan, Sales and Marketing Director of Edaran Tan Chong Motor Sdn Bhd.
Test-drive and win an iPhone
Mr. Tan invites the public to try the new Almera Turbo at Nissan showrooms nationwide. “Those who take a test-drive stand a chance to win one of 5 iPhone SE mobilephones and also a chance to win prizes in the ‘Buy & Win’ Contest when they purchase and register the all-new Nissan Almera Turbo before December 31, 2020,” he said.
Until December 31, 2020, prices in Peninsular Malaysia (without insurance) range from RM79,906 to RM91,310 with sales tax exemption. After that, the sales tax of 10% will be included again and the prices of the three variants will be increased to between RM83,888 and RM95,888.
A 5-year unlimited mileage vehicle warranty comes standard, along with free scheduled maintenance for 5 times (alternating) during the first 5 years.
UPDATE ON 17/12/2020: The Penang ferry services for 4-wheelers will not be discontinued after December 31, 2020 as the government has asked for them to continue. A sum of RM30 million will be provided to the Penang Port Sdn Bhd, which operates the ferry services, for maintenance and repairs so that the two ferries can continue to be used.
If you have not travelled on the Penang ferry, or have not done so for a long time, your last chance to do so will be December 31, 2020. After that, the service that has been running for 126 years will cease for 4-wheeled vehicles but will still be available for pedestrians, motorcycles and bicycles. From January 1, 2021, motorcars and commercial vehicles will have to use the two bridges to cross over to the island or vice-versa.
The move to end ferry operations is partly due to the ferries being old and maintenance costs are high. Though there used to be a number of ferries before, the number has actually dropped to two (Pulau Talang Talang and Pulau Angsa) as the others have aged and were decommissioned. While their vehicle-carrying role may no longer be used, there are plans to preserve them by turning them into a floating restaurant and museum at the Tanjung City Marina in George Town.
Generations of Malaysians will remember the ride on the Penang ferries, which take about 15 to 20 minutes. There is time to stand on the deck and look out and enjoy the breeze.
During the first six months of next year, two speedboats will be used to provide ferry services 40 times a day. These will be able to take around 200 passengers at a time. Currently, 1.2 million people use the ferries daily. It is believed that one of the remaining ferries will be used in the short-term for ferrying motorcycles.
With the suspension of the vehicle ferry services, the Raja Tun Uda Terminal will be closed for renovation and the ferry operations will be moved to Swettenham Pier. After the work is completed, the terminal will be reopened for the ferry services. New rates will also be announced at that time and additional vessels will also be put into service.
From January 1, 2021, 4-wheeled vehicles will only be able to travel between the island and the mainland using the two bridges.
History of the Penang ferry service
Generations of Malaysians have travelled on the ferries to cross over to the island before the first Penang Bridge was opened in 1985. The first regular ferry service began in the late 1800s, 1893 or 1894, and it was operated by the Beng Brothers. At that time, their ferries used the Kedah Pier on the island and Bagan Tuan Kecil Pier on the mainland side in Butterworth.
As the use of the ferry services grew, so too did the company running them although it was eventually taken over entirely by one of the brothers. The harbour authorities ensured that proper facilities were constructed with piers extending further out so that the ferries could dock in deeper water.
The modern ferries as we know them today appeared in the late 1950s, and they had the ability to efficiently load and unload vehicles at both ends. In fact, most of these early ones were used for decades and by now, the remaining ones are about 40 years old. To the credit of the engineers who designed and built them, and the people who maintained them, the mechanical breakdown that resulted in services being suspended only took place in August this year – the first time in the 126-year history of the service.
