The Volvo S90, which traces its roots back to the 960 of the 1990s, has been updated with a new exterior and interior finishing. Assembled at the Volvo plant in Selangor, the flagship sedan is built on the Scalable Product Architecture (SPA) platform and, for the Malaysian market, uses Volvo’s Drive-E turbocharged/supercharged powertrain.
The 2021 S90 Recharge T8 is currently priced from RM339,315 (without insurance) but will rise to RM358,888 after June 30, 2021, if the sales tax exemption is not extended. Additionally, there will be a T5 variant (priced at RM328,888) which will be available from June 2021 onwards.
The T8 variant is powered by a Twin Engine and has a rechargeable lithium-ion battery pack. Total system output of the plug-in hybrid powertrain consisting of a 4-cylinder petrol engine and electric motor is 407 bhp/640 Nm, which is used to power the Electric All-Wheel Drive system with Electric Rear Axle Drive.
Minimalist design updated
Similar to the XC90, the S90 Recharge T8 has Volvo’s design language which blends minimalist design and stylistic cues such as the ‘Thor Hammer’ LED headlight design, vertical chrome grille with the Volvo Iron Mark, and a bold and clean use of the Volvo spreadmark on the rear. The tail lamps have also been changed to a similar design to the recently launched S60 T8 R-Design, adding a touch of sportiness.
The Scandinavian-ness is a key feature of Volvo interiors while connectivity and technology are strong points of the S90 Recharge T8. Vertical air blades are installed on each side of the Sensus user interface which keeps the driver connected with intuitive technology and personalised convenience.
Premium 1400W sound system
For entertainment, there’s an upgraded Bowers & Wilkins sound system with a total of 19 speakers, including the signature Tweeter-on-Top speaker integrated into the design contours of dashboard. This speaker system also employs Bowers and Wilkins’ exclusive Nautilus speaker technology and includes new double-dome aluminium tweeters and the new generation mid-range speaker cones in Continuum composite material.
Combined with the unique feature of different room modes such as the Concert Hall Mode, which is modelled after the exact acoustic qualities of the famous Gothenburg Concert Hall, and also a Jazz Club Mode, the occupants are promised an experience said to be comparable to having seats in a Swedish theatre or a classy jazz club. The system has an output of 1,400W and can be interfaced with compatible smartphones using Apple Carplay or Android Auto.
Intellisafe system with 180 km/h maximum speed
Standard Volvo safety features starting with a chassis made of boron steel for added body strength. This complements Volvo’s Intellisafe system that assists the driver to avoid accidents, or minimise the effects of collisions. Some of the systems – like Blind Spot Information System and City Safety – which are today found in many cars were pioneered by almost Volvo 20 years ago.
Incidentally, those who buy the latest Volvos will be able to travel at no more than 180 km/h, even if the car is capable of a high speed. The carmaker made this decision in 2019 ‘to help close the remaining gap to zero serious injuries and fatalities in traffic’.
Just as Euro NCAP (New Car Assessment Program) assesses the safety performance of new models sold in Europe, Green NCAP evaluates the environmental performance of new vehicles. Periodically, it compiles a list of models and recently release information on 25 new models. These include, for the first time, plug-in hybrid electric vehicles (PHEVs).
The results of three models – the Kia Niro, Mitsubishi Outlander and Toyota Prius – show that not all plug-in hybrids offer the same environmental benefits. The Hyundai NEXO – a hydrogen fuel-cell electric vehicle (FCEV) – demonstrates the promise of this developing technology. The vehicles on the latest list include the fully electric Volkswagen ID.3 and 19 combustion engine cars, of which two – the Skoda Octavia Combi 2.0 TDI and VW Golf 1.5 TSI – stand out from the rest.
Hyundai NEXO FCV
Nothing beats pure electric vehicles
When it comes to environmental cleanliness, pure electric vehicles outshine the competition – which shouldn’t really be surprising. With rising consumer interest, more and more traditional carmakers are getting serious about electric vehicles and have comprehensive electrification programs for the coming years.
Volkswagen’s first standalone electric car, the ID.3, reinforces this message, joining the Battery Electric Vehicles (BEVs) previously tested by Green NCAP with a maximum 5-star rating. The NEXO, a hydrogen fuel-cell car, also achieved 5 stars, as it proved to be just as clean as a BEV and very nearly as energy efficient.
Layout of fuel-cell electric vehicle (2015 Toyota Mirai)
Huge potential in fuel cell technology but…
Using a fuel-cell to convert hydrogen into electricity, the NEXO emits only water at the tailpipe and can offer a driving range unmatched by any available pure electric vehicle at this time. Refilling of the hydrogen tank is also as quick and easy as a refuelling a car with petrol or diesel. The NEXO result clearly shows the huge potential of the technology, but fuel-cell cars can only grow in numbers when consumers see sufficient hydrogen fuelling stations around their country.
PHEV technology is currently much favoured by manufacturers seeking to reduce their carbon footprint and comply with new emissions legislation. Marketed as offering ‘the best of both worlds’ – battery-powered cleanliness when it is needed with the driving range of a combustion-engined car – Green NCAP’s tests revealed that, even when optimally charged, not all PHEVs are the same.
Toyota Prius PHEV
Toyota’s Prius impressed most with a 4-star rating that beats all but pure electric and hydrogen fuel cell cars. The Niro followed closely with 3½ stars, but the Outlander only achieved 2 stars, less than some of the latest Euro6-compliant petrol or diesel cars.
“People want independent, transparent information about the environmental impact of cars. These PHEV results show why that is so important. Consumers could be forgiven for thinking that, by buying a car labelled ‘PHEV’ and keeping it charged all the time, they will be doing their bit for the environment, but these results show that this is not necessarily the case,” said Euro NCAP Chairman, Niels Jacobsen.
Mitsubishi Outlander PHEV
“The Outlander shows that a big, heavy vehicle with a limited driving range is unlikely to offer any benefit over a conventional car. On the other hand, Toyota, with its long experience of hybrid technology, has done a terrific job and the Prius, properly used, can offer clean, efficient transport. It depends on the implementation and hybridisation strategy but what is true of all PHEVs is that they need to be charged regularly and driven as much as possible on battery power if they are to fulfil their potential,” noted Jacobsen.
Volkswagen Golf 1.5 TSI
Some non-electrified cars still very clean
The Toyota Yaris Hybrid further underlines Toyota’s expertise in the field of electrification with a respectable 3½ star rating. But it is matched by two conventionally-engined cars – the diesel-powered Skoda Octavia Combi 2.0 TDI and the petrol-fuelled VW Golf 1.5 TSI. These are the best results achieved so far by non-electrified cars.
“Euro6 legislation has made a real difference. For the first time, we’re seeing cars perform in real- world driving the way they promise on the test bench and we should congratulate car manufacturers and emissions engineers for the huge strides they have made in the last few years,” Jacobsen observed.
For FCEVs to grow in numbers, consumers will have to see a sizable network of hydrogen refuelling stations n their country.
“The future looks like it belongs to electric cars of one sort or another but, for now, consumers face a bewildering choice. Green NCAP is here to help them make informed decisions so that we can all contribute now to a cleaner, more sustainable future,” he said.
About Green NCAP
Green NCAP is an independent initiative which promotes the development of cars which are clean, energy efficient and not harmful to the environment. Emissions of several pollutant gases are regulated by legislation in the EU. All cars sold in Europe must pass type-approval tests to demonstrate that their emissions of carbon monoxide, oxides of nitrogen, unburnt hydrocarbons and particulate matter do not exceed certain critical values. However, regulation offers no reward to manufacturers who go beyond the minimum standards of approval testing.
Green NCAP rewards manufacturers whose vehicles go beyond the minimum legislative requirements and offer excellent real-world performance. The organisation uses a broad range of tests to address the flaws in approval tests and, through consumer information, rewards those manufacturers whose vehicles go beyond the minimum requirements and offer excellent, robust, real-world performance. Regulatory testing is a good starting point, and Green NCAP’s tests are an addition and complementary to the legislative requirements.
The locally-assembled Volvo XC40 range in Malaysia now has a second variant – the XC40 Recharge T5. The ‘Recharge’ indicates it is a Plug-In Hybrid Electric Vehicle (PHEV), so it extends the already varied PHEV range available from Volvo Car Malaysia.
The second model in the XC40 range is priced at RM241,997.04 for private registration in Peninsular Malaysia (excluding insurance and with full sales tax exemption until the end of June). This is RM10,346 more than the XC40 T5 R-Design.
1.5-litre petrol engine + electric motor
Unlike the XC40 T5 AWD R-Design with a 2-litre turbocharged engine, the XC40 Recharge T5 has a hybrid powertrain which is composed of a 1.5-litre turbocharged 3-cylinder petrol engine that works together with an 82 ps/160 Nm electric motor. The total system output is 262 ps/425 Nm, which flows to the front wheels only through a 7-speed dual-clutch (wet type) transmission.
Performance-wise, the hybrid powertrain gives a zippy feel as maximum torque kicks the moment the car moves off and the level remains the same to 3,000 rpm. But if run against the T5 with just the petrol engine, the 0 to 100 km/h time is shown to be slower – 7.3 seconds versus 6.4 seconds. Nevertheless, both cars have the same top speed of 180 km/h and that is a maximum speed set by Volvo as a measure for safer motoring. You may grumble but that maximum speed is 70 km/h over the highest speed limit in Malaysia anyway.
0% to 100% in 3 hours
As PHEV, it’s possible to recharge the 10.7 kWh lithium-ion battery pack from an external source. This can be a household power supply – which will take up to 5 hours to fully recharge the battery pack – or a charging station which can bring the time to around 3 hours. Of course, that assumes a fully drained empty battery pack and in practice, it is likely that an owner would be ‘topping up’ the capacity the same way as with a fuel tank.
45 kms on electricity alone
While driving, the petrol engine will be used and consume fuel but because the electric motor also provides part of the propulsion, fuel consumption will be reduced and can be as economical as 45.5 kms a litre. If conditions permit, it is possible to go up to 45 kms on just electricity alone which is not only good for your wallet but also the environment. And with the fuel tank having a volume of 49 litres, the potential range with a full tank is over 2,000 kms so refuelling will probably be much less frequent.
Built on Volvo’s Compact Modular Architecture (CMA) platform, the XC40 Recharge T5 has the same looks as the T5 AWD with the black roof contrasting with the 5 colour choices (although it is less evident with the Black Stone finish). The black-themed R-Design package is also fitted, probably to simplify assembly by having the same accessories and equipment.
Scandinavian with R-Design interior as well
The interior has the typical Scandinavian ambience that every Volvo today possesses. It’s in the colours , textures and minimalism that is evident around the cabin. Blended into this is underlying high-tech with the fully digital-graphic instrument panel, Intelligent Driver Information System and SENSUS, which is a fully integrated, connected navigation system. Information is shown on a 9-inch colour touchscreen display.
The R-Design package is not just to make the exterior sportier but is also applied within with sporty elements in the trim and items like the shifter and pedals. Also notable is the effort to keep the environment clean, even more important in these times. Volvo’s ventilation system has been upgraded to clean the air more effectively and ensure air quality is premium, just like the car.
Leadership in safety, as always
Being a Volvo, the XC40 comes with a very extensive list of safety systems and features, categorised under two areas of the Intellisafe package – active and passive. The active systems include City Safety which helps the driver avoid accidents with automatic emergency braking if necessary. The camera and radar systems have been improved further to be able to detect not just pedestrians but also cyclists and large animals.
One of the things which Volvo engineers worked hard to prevent was the roll-over and since the first XC90 – which was the carmaker’s first SUV – a roll-over protection system has been present to prevent such situations due to the tallness of the vehicle.
For passive protection – which is prevent or reduce injuries in an accident – the XC40 has a strong structure with the Side Impact Protection System (SIPS) that has been in use since the days of the 850 in the early 1990s. This includes a Dual-Chamber SIPSBag which deploys at the sides of the seats for additional protection.
“We are excited that we can finally offer one of our most successful SUVs as a plug-in hybrid electric vehicle, and thus completing our full line-up of PHEVs. The launch of the XC40 Recharge T5 is a sign of greener times ahead as we continue to strive towards a more sustainable future and do our part to not only reduce our carbon footprint, but also help our customers reduce theirs as well,” said Nalin Jain, MD of Volvo Car Malaysia.
Special deal for online booking
Customers who book online will receive a complimentary Bowers & Wilkins PX5 wireless headphone set worth RM2,800. This offer is limited to the first 50 customers who book online and must take delivery of the car before May 31, 2021 (terms and conditions apply).
With electrification as a necessity for future products, McLaren Automotive has started an entirely new chapter in its history, and a new era in supercar technology and performance. The Artura, the first completely new model produced since the 12C, is McLaren’s first series-production High-Performance Hybrid supercar.
As with all other modern McLarens, super lightweight engineering is a key element and was a priority for the engineers as they considered the replacement of the conventional combustion engine with a hybrid powertrain which would include a heavy battery pack.
Opportunities to innovate
It was a challenge that presented McLaren’s engineers and designers with new opportunities to innovate. A demanding programme of weight reduction, encompassing every area of the Artura from the chassis platform to the uniquely compact HPH powertrain system, to the weight of cabling used in the electrical systems (where a 10% reduction was achieved), resulted in the Artura having a lightest dry weight of 1,395 kgs.
The total weight of hybrid components is just 130 kgs (including an 88kg battery pack and 15.4 kg E-motor), resulting in a kerb weight of 1,498 kgs. That’s on par with comparable supercars that do not have hybrid powertrains, giving the Artura a super-lightweight advantage.
Twin turbo V6 + E-motor
At the heart of the Artura’s powertrain is McLaren’s all-new M630 2993 cc twin-turbocharged V6 petrol engine. With a power output of 585 ps – nearly 200 ps per litre – and 585 Nm of torque, the dry-sump aluminium engine is compact and lightweight; at just 160 kgs, it weighs 50 kgs less than a McLaren V8 and is significantly shorter, enhancing packaging efficiency.
Working in harmony with the new V6 is a compact E-motor, located within the transmission bell housing. Small and more power-dense, it is capable of generating 95 ps and 225 Nm, boasting a power density per kilo that is 33% greater than the system used in the McLaren P1.
The instantaneous nature of the motor’s torque delivery – known as ‘torque infill’ – is key to the car’s razor-sharp throttle response. Exhilarating ‘off-the-line’ performance is promised with a claimed 0 – 100km/h time of 3 seconds, and a top speed somewhere beyond 330 km/h but limited to that speed.
No reverse gear
The dual propulsion systems are integrated via an engine disconnect clutch, driving an all-new, twin-clutch transmission, developed specifically for the Artura. Despite having one more ratio than the existing McLaren transmission – to optimise power and torque delivery – the lightweight, short-ratio gear cluster is 40 mm shorter in length. It also requires no reverse gear as the E-motor takes care of reversing by literally rotating in the opposite direction.
The driver can choose from four Powertrain modes for different driving conditions and preferences. There are Sport and Track modes where electric power is deployed in an increasingly aggressive manner for low-end response and acceleration. Separate handling mode choices adjust damper firmness and the degree of Electronic Stability Control intervention to suit driver preference and weather and road conditions.
30-km range in EV mode
The E-motor is powered by a lithium-ion battery pack with a usable energy capacity of 7.4 kWh and a pure EV range said to be up to 30 kms. The battery is refrigerant-cooled using cooling rails, and the assembly – including a power distribution unit which transfers battery power from the rear of the vehicle to the ancillaries in the front – is mounted on a structural carbonfibre floor. This assembly is then bolted onto the rear base of the monocoque, optimising stiffness, weight distribution and crash protection.
Full PHEV capability
The Artura is designed with full Plug-in Hybrid (PHEV) capability; the battery pack can be recharged to an 80% level in just 2.5 hours with a standard EVSE cable. The batteries can also harvest power from the combustion engine during driving, tailored to the driving mode selected.
The Artura is the first model to have the new McLaren Carbon Lightweight Architecture (MCLA) at its core, setting a new standard for the carmaker’s advanced flexible chassis design. Optimised for high-performance hybrid applications, it includes a bespoke battery compartment and introduces a ground-breaking domain-based ethernet electrical architecture, along with an electrical heating, ventilation and air-conditioning (eHVAC) system.
The ethernet architecture reduces cabling by up to 25% as well as speeds up data transmission. This also facilitates access to advanced driver-assistance systems (ADAS) including Intelligent Adaptive Cruise Control, Lane-Departure Warning, Auto High-Beam Assist and Road-Sign Recognition as well as Over-The-Air (OTA) software updates.
Pure supercar design
The engineering artistry beneath the Artura’s skin is complemented by its exterior design. The low-nose, cab-forward, high-tail stance is pure supercar, the drama underlined by the signature McLaren dihedral doors – which open closer to the body and house mirrors that fold in more tightly – and further enhanced by the short wheelbase and low stance.
The overall effect gives the Artura an almost ‘shrink-wrapped’ appearance, evolving a McLaren design approach seen in recent models to a new level. The lithe, technical sculpture has only minimal body shutlines and panel joints, assisted by features such as an entire rear clamshell engineered and superformed as one panel.
The shape, sculpted to optimise performance and manage airflow for aerodynamic performance and cooling, is driven by the McLaren design principle of ‘everything for a reason’ that is in evidence throughout the car. The centre of the front splitter is an example of this, being the intake for the eHVAC system and also housing the front-mounted radar that forms part of the optional ADAS package.
Driver-centric cockpit
Inside, the Artura is no less of a revolution, with the cockpit centred more than ever around the driver. The model introduces an all-new Clubsport seat, which uniquely combines the range of motion expected of a moveable backrest with the light weight and support of a bucket seat. Innovative yet uncomplicated, the whole seat pivots as one through an elliptical arc when adjusted, combining under-thigh support, seat height and backrest in one movement.
The seat locates in the ergonomically optimised cockpit, its carbonfibre shell combining with slim facia and doors to allow a 97.5th percentile (193 cm) driver to stretch out with generous knee and legroom, even with the backrest significantly reclined. Shoulder room is equally capacious, allowing a driver to get appropriately comfortable and seated correctly.
Driver and passenger comfort overall was an imperative throughout the development of the Artura, with NVH refinement high on the agenda. Innovations that benefit refinement include the stiffness of the MCLA, fluid-filled mounts for the powertrain and the new rear suspension design and settings. Pirelli’s patented Noise Cancelling System is also adopted to reduce vibration and noise.
More than a technological game-changer
At the outset, McLaren designed the Artura to be not only a technological game-changer, but also to stay true to the core McLaren attributes of being incredibly engaging to drive and displaying the highest levels of dynamic ability. The engineers focused on stability under braking; rear-end controllability; increased grip and optimised aerodynamic downforce – as well as enhanced driver engagement across the board. Key to hitting these goals is McLaren’s first-ever deployment of an electronically controlled differential (E-diff), to independently control torque moving across the rear axle. Lighter, more controllable and smaller than a mechanical locking diff (it fits within the transmission), the E-diff locks and unlocks individual rear wheels to improve traction out of corners.
The innovative rear suspension system, which pairs a top upper wishbone with two lower links and a tie rod in front of the wheel centre, maximises vehicle stability and precision, and reduces understeer out of a corner while accelerating. The wider tyres allow additional stability and better traction performance while the combination of a short wheelbase, E-diff and the physical downforce provided by the integrated rear spoiler and diffuser ensure both incredible agility at low speed and a high level of stability at high speed.
Pirelli Cyber Tyre
Dynamic precision is additionally enhanced by Pirelli Cyber Tyre technology. Comprising hardware and software integrated with the Artura’s electronic systems and featuring an electronic ‘chip’ inside each tyre, the Cyber Tyre generates real-time data and relays it to the car’s stability control systems to optimise tyre performance.
One feature that is unashamedly not new on the Artura is McLaren’s trademark hydraulically-assisted steering. Proven on generations of McLaren supercars, it remains the ultimate system for providing feedback. In the Artura, the system has been fully redesigned to reduce weight and is combined with an updated and bespoke version of McLaren’s Proactive Damping Control system that further supports exceptional ride and handling characteristics.
Braking performance is also exceptional, as would be expected of a supercar. This is provided by carbon ceramic brakes and lightweight aluminium calipers from the same family as the systems that feature in McLaren’s latest LT models.
“Every drop of McLaren’s experience and expertise has been poured into the Artura. Our all-new, High-Performance Hybrid delivers all of the performance, driver engagement and dynamic excellence for which McLaren is renowned, with the additional benefit of EV driving capability. The introduction of the Artura is a landmark moment – for McLaren, for our customers who will appreciate and enjoy this car on every emotional and rational level, and for the supercar world,” said Mike Flewitt, CEO of McLaren Automotive.
First deliveries to customers will start during the third quarter of 2021 with prices in the UK starting from £185,500 (about RM1.04 million). There will be 3 further core specifications for customers to choose from.
Bentley has launched the first of two PHEVs (Plug-in Hybrid Electric Vehicles) – the Bentayga Hybrid which the company says is the only electrified true-luxury SUV in the world. It is the third model in the Bentley SUV portfolio and after deliveries start in mid-2021, it is expected to become the best-selling version of latest Bentayga family.
The hybrid powertrain consists of a 94 kW (126 bhp) E Motor which can produce up to 350 Nm of torque. Working together with the electric motor is a 3-litre twin turbocharged V6 petrol engine that provides additional torque as required or when going at speeds above 135 km/h. To warn pedestrians of the vehicle’s near silent movement, a dedicated speaker emits an exterior sound at low speeds.
The 17.3-kWh lithium-ion battery pack consist of 168 individual cells with an expected life of 160,000 kms or 8 years, and can be charged to 100% in as little as 2.5 hours (depending on region and charging facilities). The power electronics convert the energy stored from the high voltage battery to supply the E Motor or supplement the existing 12V vehicle electrical infrastructure.
Three E modes
The driver of the Bentayga Hybrid can choose different drive modes for optimum motoring performance and efficiency. A dedicated button allows control over the 3 E Modes – EV Drive, Hybrid Mode and Hold Mode. These will enable the driver to manually manage battery usage during a journey – though this can also be managed automatically by the car.
There is also an Efficiency Accelerator Pedal which provides a pressure point when in EV Drive to denote the boundary between pure electric and hybrid power. This encourages the driver to stay in EV Drive for as long as possible but can also be disabled if required. In pure electric drive, the E Motor continues to function up to speeds of up to 135 km/h.
Bentley Hybrid Efficiency Braking blends seamless integration of braking between the E Motor and conventional hydraulic braking, to provide a conventional feel to the brake pedal for comfort and the driving experience while maximising recuperation of energy.
Real-world usage studies
Bentley’s research shows over 90% of owners use their first-generation Bentayga Hybrid on a daily basis or several times a week, and nearly 100% of them use EV mode, with half of them consistently undertaking journeys of less than 50 kms.
It was also found that 78% of zero emissions journeys (those in pure electric mode) were achieved regularly over a 900-km activity. In a more urban environment, one of Bentley’s development drivers achieved 67% in EV model over 1,080 kms around San Francisco. In the UK, Chris Cole (Project Leader for the Bentayga Hybrid) did 64% with zero emissions commuting to and from the factory. In real-world terms, therefore, the majority of journeys can be achieved completely in electric mode only.
Unified Bentley design DNA
The new exterior and interior design emphasise Bentley design DNA across the entire model range. It has been completely refreshed from the previous generation to create an even more stylish and purposeful car. Every panel at the front and rear of the car has been altered to give it a cleaner and more modern look.
At the front, a larger and more upright new matrix grille allows the Bentayga’s elegant bonnet to sweep down to the very edge of the chrome work. This gives the car a more dominant, upright profile and pushes the new elliptical LED matrix headlamps further apart, raising them 30 mm higher leading to a more muscular aesthetic. The new headlamps also include the marque’s now-signature cut crystal design, which makes them appear to sparkle even when not lit.
Perhaps the most dramatic design changes can be seen at the rear of the car where the new Bentayga range can be clearly differentiated from its predecessor. In line with the Continental GT, it features elliptical tail lamps for the first time.
The new looks are further accentuated with numerous individualisation possibilities, including the contemporary urban appeal of the Blackline Specification that replaces all exterior chrome with black versions.
Re-imagined interior
A quieter and more refined driving experience is promised with the Bentayga Hybrid. The interior has been re-imagined and now contains a modernised combination of luxury materials and intricate craftsmanship. Bentley designers have created an even more relaxing environment for passengers with major changes to the door trims and steering wheel, plus a redesigned centre fascia and digital instrumentation cluster. These are complemented by new seats that further improve on seat comfort.
Two seating configurations are available. The standard 5-seat layout benefits from an all-new seat frame, doubling the travel of the rear-seat recline angle, and the optional 4-seat configuration has two individual rear seats separated by a centre console. The ergonomics of the 4-seat configuration are further enhanced from a 30 mm increase in knee room in the upright seated position, with an improvement of almost 100 mm in the reclined position, making luxury travel even more comfortable.
A new quilting design is included in Mulliner Driving Specification cars, while customers can choose from 8 sustainably-sourced veneers including two straight grained options new to Bentayga – Koa and Crown Cut Walnut.
A next generation infotainment system is integrated seamlessly into the handcrafted, Bentley ‘wing’ dashboard design and features a 10.9-inch display screen with edge-to-edge graphics. The all-new digital display includes super high-resolution and dynamic graphics which are configurable to suit driver preferences.
The latest hardware and software bring all-new navigation with satellite maps, online search and other features. Wireless Apple CarPlay is standard for the first time, alongside the existing wired system, along with Android Auto. Rear seat occupants benefit from the introduction of a new, larger touchscreen remote control tablet, similar to that introduced in the all-new Flying Spur.
Connectivity around the car has been significantly improved, with USB-C data ports and a wireless phone charger now standard. The new Bentayga range is now provided with an embedded SIM, as with the latest Continental GT models, meaning My Bentley connected car features no longer require customers to provide their own data connection.
Besides range anxiety – the concern about how far you can go on a fully charged battery pack – has been on the minds of people who consider hybrids or electric vehicles, the other issue has also been the cost of the battery pack itself. In the early years, when the technology was still young, battery packs were very expensive and discouraged many people. But there has been constant advancement of the technologies, along with prices coming down, although they still are much more expensive than the small batteries that you see in the engine bay.
The battery packs have generally been reliable and how long they last has depended on many factors, both environmental as well as driving. It’s like batteries in laptops or mobilephones – some people enjoy a long service life while others may have to replace them within a couple of years when they cannot hold their charge properly.
A Volvo lithium-ion battery pack.XC90 – first Volvo PHEV in Malaysia
PHEVs sold since December 2015 are covered
To give customers peace of mind, many companies have offered longer warranties on the battery packs. Volvo Car Malaysia announced its extended warranty in March 2020 but the coverage was only for models in its Plug-in Hybrid Electric Vehicle (PHEV) range registered from January 1, 2020.
Now the company has extended the coverage to all Volvo PHEVs purchased since December 3, 2015 when the XC90 T8 PHEV was launched in Malaysia. The company says that this has been prompted by ‘the enthusiastic response from customers and realising the positive impact that long-term electrification can bring to the environment’.
The S60 T8 is one of the models in Volvo’s PHEV range.
“As we continue our journey into sustainability, we are happy to announce this new, extended warranty coverage for our customers who have purchased any Volvo PHEVs since the launch of our first XC90 PHEV in Malaysia. This is our way of showing gratitude to the early adopters and also for those who are striving to make a more sustainable decision,” said Nalin Jain, MD of Volvo Car Malaysia.
The Volvo range of PHEVs for the Malaysian market consists of the S60 T8, XC60 T8, XC90 T8, and S90 T8. Prices range from RM295,888 to RM409,888 (excluding insurance).
The SF90 Stradale, Ferrari’s hybrid plug-in electric vehicle (PHEV), has been joined by a topless version – the new SF90 Spider. Just as the SF90 Stradale was the brand’s first PHEV, the SF90 spider is its first production PHEV spider.
Though it loses its roof (when desired), the SF90 Spider’s performance is not compromised and it has the same extreme supercar specification. The retractable hard top (RHT) is the latest version of Ferrari’s signature retractable hardtop architecture.
SF90 Stradale, available in Malaysia priced from RM1.91 million.
14-second operation
The RHT is so simple that it can open or close within 14 seconds, with operation possible even when the car is on the move. The use of aluminium in its construction also means that it is around 40 kgs lighter than a conventional retractable hardtop. Its compactness requires just 100 litres of space, rather than the 150 – 200 litres required by a traditional system.
Ferrari guarantees optimal noise insulation and protection from the elements when the RHT is raised and it will not deform at high speeds. An adjustable electric rear window also enhances occupant comfort, even when the RHT is lowered at higher speeds.
The hybrid architecture proved a challenge in terms of weight management. While the extra 270 kgs of the hybrid system was amply compensated for by the extra power delivered, extensive optimisation and weight reduction work was also required on the rest of the car to keep overall weight down to 1,670 kgs.
Just as the SF90 Stradale redefined the aerodynamic performance levels of the Ferrari range, the SF90 Spider is pushing the limits of the results delivered still further. The goals that drove the aerodynamic development of the car from the very earliest stages were maintaining the SF90 Stradale’s performance levels with the RHT deployed, minimising aerodynamic turbulence and noise with the RHT retracted, and optimising power flows.
Unmatched downforce and aerodynamic efficiency
The downforce and efficiency figures are said to be unmatched by any other car in the category. The main features in the SF90 Spider’s aero design include the shut-off Gurney at the rear, an active control system that varies downforce over the rear axle, the front underbody with vortex generator strakes, and forged wheels with wing profiles. The results: a massive 390 kgs of downforce generated in cornering at 250 km/h (with the special Assetto Fiorano specification).
In a first for a Ferrari production spider, the SF90 Spider has plug-in hybrid architecture in which the internal combustion engine is integrated with two electric motors at the front and one at the rear derived from and named after the MGUK (Motor Generator Unit, Kinetic) used in Ferrari’s F1 cars.
Most powerful Ferrari production V8
The synergy between the turbocharged V8 petrol engine and the electric motors generates a maximum of 1,000 ps/900 Nm, with 60 ps more than any other V8 turbo engine ever built by Ferrari. The 8-speed, oil-bath, dual-clutch gearbox used in the SF90 Stradale has been redesigned for the spider version.
Much attention was given to sound quality when redesigning the exhaust system as the soundtrack is one of the pivotal factors in the exhilarating pleasure of driving a Ferrari. The introduction of a ‘hot tube system’, which transfers sound more directly to the cockpit, has produced fuller, richer harmonics across the entire frequency range, improving both in-car sound quality and intensity as revs rise compared to previous Ferrari V8s.
To make full use of the powertrain’s output, the engineers improved the vehicle dynamics systems to allow the driver to enjoy the maximum potential, and not just in terms of pure performance and lap times. The new hybrid architecture required extensive integration work on the car’s many different control logics, which led to the development of the new eSSC (electronic Side Slip Control) vehicle dynamics control system.
Digital instrumentation with HUD
The look and feel of the cabin was driven in large part by the complete redesign of the HMI (Human-Machine Interface). The instrumentation is now predominantly digital with all the screens going completely black when the car is not running. The central instrument cluster comprises a single 16-inch HD screen, complemented by a head-up display.
The steering wheel completes that transfer process from the competition world and also ushers in a new era by introducing a series of touch commands that allow the driver to control virtually every aspect of the car without ever taking the hands off the wheel.
The F1 bridge, a signature on the previous models, has now disappeared from the central tunnel and been replaced by a modern take on the gearshift gate, an iconic feature of Ferrari’s manual gearboxes. In the new gate, however, the gearshift grille is digital as befits an automatic transmission.
Going to the limits
As is the case with the SF90 Stradale, the SF90 Spider is also available with an option for owners who want to go right to the edge of the performance envelope. They can specify the Assetto Fiorano pack with upgrades such as Multimatic shock absorbers. Others include the adoption of high-performance materials (such as carbonfibre and titanium), a carbonfibre rear spoiler and road-homologated Michelin Pilot Sport Cup 2 tyres designed to improve track performance in the dry.
The first customers of the SF90 Spider can expect to get their cars during the second quarter of 2021. Each of them will pay prices that start from €473,000 (around RM2.3 million) in Italy.
After over 100 years, the automobile industry is undergoing a major change that will see a progressive diminishing of vehicles with only internal combustion engines, leading to hybrids and eventually only electric powertrains. The global players have already begun the process of making the transition, and Bentley Motors is one of those that has revealed plans which are outlined in its Beyond100 strategy.
Aiming to offer truly sustainable luxury, the carmaker will reinvent every aspect of its business to become an end-to-end carbon neutral organisation as it embarks on its second century. The target is driven by a transformation programme across Bentley’s entire operations and products. This includes switching its model range to offer exclusively plug-in hybrid (PHEVs) or battery electric vehicles (BEVs) by 2026, and full electric vehicles (EVs) only by 2030.
Bentley’s traditional powertrains with internal combustion engines will be phased out and replaced with hybrid and then all-electric powertrains by the end of this decade.
No more ICE by 2030
The announcement today highlights Bentley’s plans for another 100 years, evolving from the world’s largest producer of 12-cylinder petrol engines to having no internal combustion engines within a decade.
Bentley’s electrified future was actually previewed with the reveal of the all-electric EXP 100 GT concept car (pictured below) in its centenary year. That concept featured a multitude of sustainable materials. These included 5,000-year-old copper-infused Riverwood, traditionally produced wool carpets and a leather-like textile upholstery made from a by-product of wine-making. Bentley will continue to use only sustainably sourced materials throughout its current, and next generation of cars.
Carbon-neutral production
The Beyond100 strategic plan will see, among other things, the change to a carbon-neutral luxury car factory. Last year, Bentley’s production facility in England became the first luxury automotive factory in the UK to be certified carbon neutral by the Carbon Trust. This followed two decades of implementing innovative solutions, including a water recycling system in the paint shop, local tree planting, installation of a 10,000 solar panel carport, taking the total number of on-site solar panels to 30,000, and a switch to renewable-only electricity sources.
The factory will continue to improve its environmental operations. By the end of 2025, the company intends to reduce its factory environmental impact by focusing on energy consumption, carbon dioxide emissions, wastewater, use of solvents in the paint process and becoming plastic neutral. This will result in a climate positive factory by 2030, actively reducing levels of carbon in the atmosphere, while in parallel the business invests in renewable energy and forestation projects.
Sustainable luxury mobility
Bentley will also redefine its business model which is built around its accelerated journey towards electrification. Having already committed that every model line will be offered with the option of a hybrid variant by 2023, with Bentley’s first pure electric model to be launched in 2025, Bentley is making a clear move towards zero emission mobility.
Achieving sustainable luxury mobility relies heavily on a sustainable business model, and Bentley’s aim is to become the world’s benchmark luxury car business, financially resilient and recession-proof. The challenging economic situation caused by the COVID-19 pandemic resulted in Bentley undertaking its biggest change programme in a century.
This change programme was driving for consistent financial resilience through rapid productivity improvements across the business, and a fundamental restructure. The results from the comprehensive cost and investment structure has placed the business in a position to achieve a positive financial performance for the full year 2020, in spite of the extenuating external circumstances.
Bespoke continues with sustainability
As well as accelerating the product journey towards electrification, Beyond100 opens a new era for Bentley’s bespoke division, Mulliner, which now has a three-portfolio structure comprising Mulliner Classic, Mulliner Collections and Mulliner Coachbuilt. The recently revealed Bacalar signifies the start of this new age as the first member of the Mulliner Coachbuilt family and incorporates elements of the sustainable materials showcased in EXP 100 GT.
The company is committed to handcrafting cars in Crewe for the next 100 years, whilst also preparing for a digital future, and has confirmed it will be investing in two new Research and Development buildings, a vehicle test centre and a dedicated launch quality centre.
“Since 1919, Bentley has defined luxury grand touring. Being at the forefront of progress is part of our DNA – the original Bentley boys were pioneers and leaders. Now, as we look Beyond100, we will continue to lead by reinventing the company and becoming the world’s benchmark luxury car business,” said Adrian Hallmark, Chairman & CEO of Bentley Motors.
As Ferrari’s first series production PHEV (Plug-in Hybrid Electric Vehicle), the SF90 Stradale marks the beginning of a whole new chapter in the company’s history.
‘SF90’ is a reference to the 90th anniversary of the foundation of Scuderia Ferrari and ‘Stradale’, which translates to ‘road’, underscores the distinct link that has always existed between Ferrari’s track and road cars.
From a stylistic perspective, it completely rewrites the mid-rear-engined sports berlinetta proportions introduced on the 360 Modena 20 years ago.
Ferrari has successfully taken on the challenge of combining conventional and electrical power sources with its first ever plug-in hybrid vehicle, once again drawing upon its advanced technology from the track and making it applicable for the road.
The new model delivers unprecedented performance for a production car, with figures such as 1,000 ps, and a weight-to-power ratio of 1.57 kg/ps, with 390 kgs of downforce at 250 km/h.
The 90° V8 turbo 3990 cc engine delivers 780 ps (the highest power output of any 8-cylinder in Ferrari history), with the remaining 220 ps from 3 electric motors.
The SF90 Stradale is the first Ferrari sportscar to be equipped with 4WD, a step necessary to allow the incredible power unleashed by the hybrid powertrain to be fully exploited. With an 8-speed dual-clutch transmission, its claimed 0-100 km/h time is 2.5 sec and 0-200 km/h is 6.7 seconds.
As well as exclusively providing propulsion in electric drive, the two front motors independently control the torque delivered to the two wheels, extending the concept of Torque Vectoring.
A major innovation within is the steering wheel which now has a touchpad and a series of haptic buttons that allow the driver to control virtually every aspect of the car using just their thumbs. The central instrument cluster is now entirely digital with the first automotive application of a 16-inch curved HD screen which can be fully configured and controlled using the controls on the steering wheel.
To own this Ferrari will require more than RM1,908,000 as the figure does not include duties, insurance and other taxes.
Two years ago, Suzuki and Toyota agreed to work together on joint projects for technological development, vehicle Production, and market development. Apart from the mutual supply of vehicles for the Indian market, where Suzuki has a strong presence, the two companies have also worked on sharing models.
For Toyota, it would mean a higher volume for a model and help push production costs down while for Suzuki, it would mean having a new model without the high cost of developing it. A win-win situation.
The first model to be shared is Toyota’s latest RAV4 which has been supplied to Suzuki and sold as the ACROSS. While the ‘double octagonal’ RAV4 design is evident, Suzuki’s stylists have given their SUV a different frontal look from Toyota’s model. Under the front bumper is silver garnish that underlines the off-road image of the vehicle.
The front end of the Suzuki has a different look from the Toyota RAV4 (below).
For European market
Intended for sale in the European market from the third quarter of 2020, the ACROSS has also uses the same Plug-in Hybrid system as that for the RAV4. The powertrain consists of a front electric motor producing 134 kW/270 Nm and a 2.5-litre Dynamic Force petrol engine, both of which are Toyota items.
Suzuki is offering the ACROSS only as a PHEV for sale in Europe which has tough emission regulations that a hybrid powertrain can meet more easily.
Electricity storage is in an 18.1 kWh (50.9 Ah) high-capacity lithium-ion battery pack mounted beneath the floor. The engine functions as a charger for the battery pack and provides power assistance to the electric motor during high-speed driving if required.
The hybrid powertrain helps Suzuki to meet the tougher carbon dioxide emission regulations as well as offer high fuel efficiency.
Electronic 4×4 system
The Across also has Toyota’s E-Four electronic 4×4 system for additional capability in off-road or slippery conditions. The system uses an independent 40 kW rear motor that works in conjunction with the front motor to provide front:rear torque variation ranging from 100:00 to 20:80.
Benefits of this system include enhanced stability during take-off on slippery surfaces such as snow-covered roads, and more stable handling when cornering on varying road surfaces. A ‘Trail Mode’ uses an automatic limited-slip differential control to ensure the best possible grip and control on slippery surfaces.
Central to the E-Four system is the highly sophisticated AWD Integrated Management (AIM), which controls not only drive force distribution, but also engine throttle control, transmission shift scheduling, Electric Power Steering assistance and braking, according to the driving conditions.
Same interior as RAV4
The interior environment is pretty much similar to the RAV4’s and not surprisingly shares the same high-quality materials with soft padding on the dashboard and door trims.
While cabin space is designed for the comfort of occupants in both the first and second rows, cargo space has been maximised in the spacious rear compartment. It has a 490-litre volume with the rear backrests up and up to 1,604 litres with both backrests folded down.
Advanced safety/technology features
To meet the demanding safety expectation of consumers in Europe, the ACROSS comes with a package of safety systems to help the driver. These include a Pre-Collision System (PCS), Lane Tracing Assist and Dynamic Radar Cruise Control, Blind Spot Monitor, and Rear Crossing Traffic Alert.
If the systems sound familiar, they are the same as what it found on the RAV4, which again saves Suzuki money as they do not have to incur development costs to make their own safety systems.
In Europe, new vehicles are also required to have eCall, a feature which automatically alerts emergency services with a phone message when the vehicle is involved in a traffic accident. The message includes the precise location of the vehicle, helping the emergency services to reach it faster.
The practice of one manufacturer making and supplying models to another is not new and has been going on for quite some time. In fact, it is quite common in Japan. With the market becoming more and more challenging and competitive, it only makes sense to share models and reduce cost. Each brand will have its own loyal base of customers who will be happy to have an extra choice, even if it is not made by the company.
