Customisation Archives

The ‘Godfather of Pickups’ from BRABUS

BRABUS is well known for taking Mercedes-Benz products and injecting them with an extra dose of power for those who want to stay ahead all the time. Much of its work is on engine and chassis upgrades but with the 800 Adventure XLP Superblack, they have gone further. This new model begins life as a Mercedes-AMG G63 SUV and BRABUS engineers then add 500 mm to the wheelbase to allow the overall length to be extended by 690 mm. They also add the brand’s Widestar bodykit which increases the width by 117 mm.

The company fabricates elements from sheet steel such as the new rear wall of the cab, the robust cargo bed and the side-opening tailgate. The bedsides are produced from carbonfibre using the complex prepreg process. The likewise black Flexiteek bedliner is a direct technology transfer from the construction of high-performance boats by BRABUS Marine.

The rear end of the 4-door cabin is shortened with the boot area becoming an open cargo bed and the spare wheel that was on the back door moved right against the cabin. And that transforms the ‘Godfather of SUVs’ into the ‘Godfather of Pickups’.

The rear view is characterized by the pickup tailgate that reveals the origin of this supercar with an exposed carbonfibre panel. The WIDESTAR rear fascia with stylized exposed carbonfibre skidplate rounds off the view from the rear.

To make getting in and out easier with the high ground clearance, BRABUS has added black-coated running boards. Adapted to the extended wheelbase, they can optionally be supplemented with power-retractable steps. LED lights in the flares, which are activated by pulling on a door handle or by the Keyless-Go signal when approaching the vehicle, ensure a safe step also in the dark. They illuminate the ground to the left and right of the vehicle as well as the running boards of the rocker panels.

‘Black on black’ theme
‘Black on black’ is the theme for the interior of the 800 Adventure XLP SUPERBLACK. The upholstery shop created a particularly exclusive BRABUS Masterpiece interior that has the finest black leather with sporty carbonfibre elements. Along with the headliner made from black Alcantara, high-end refinement includes covering the entire interior and the vehicle floor with the finest black leather.

The centre sections of the seats feature seashell diamond quilting and perforations applied with pinpoint precision. Many interior elements were enhanced with the ‘Heritage’ brand pattern, which pays tribute to the founding year of BRABUS with its embossed ‘77’ signets. No less than 206 cockpit elements (trim panels, handles, switches, loudspeaker covers, air vents, etc) are glazed in ‘Shadow Chrome’ to match the interior design.

Carbonfibre elements on the steering wheel, dashboard, centre console and door panels add sporty touches in the cockpit. They are complemented with aluminium for components such as the pedals, door lock pins and the BRABUS RACE paddle shifters on the steering wheel.

PowerXtra+ treatment for engine
It would not be worthy of the BRABUS badge without a power boost which comes from the 800 PowerXtra+ tuning package for the G63’s twin-turbocharged, 4-litre V8. PowerXtra + treatment includes replacing the production turbos with two newly configured BRABUS high-performance turbos. In addition to a larger compressor unit, they have a modified core assembly with reinforced axial bearing and produce a maximum boost pressure of 1.6 bar. This bumps the output to 800 ps/1,000 Nm which flows to all four 22-inch Monoblock HD wheels through a 9-speed automatic transmission.

The 5.2-metre long pickup, which weighs 2,936 kgs, can reach 100 km/h in a claimed 4.8 seconds after take-off and the top speed is electronically limited to 210 km/h due to the all-terrain tyres.

If you buy one in Germany, the price of the 800 Adventure XLP SUPERBLACK starts from 725,900 euros (about RM3.44 million ringgit). Import the vehicle to Malaysia before June 30, 2022 and you can save 50% on sales tax.

David Beckham creates a Maserati MC20 that is truly his own

The Maserati’s MC20 Fuoriserie Edition for David Beckham is like a letter written to the city of Miami, home of Beckham’s football club in America. It began as part of the carmaker’s Fuoriserie customization program which allows customers to create a very personalised Maserati. In this case, the customer was the brand’s ambassador himself, who became a designer with the help of the Maserati Centro Stile.

At Maserati Fuoriserie, a car starts as a blank canvas and customers are offered an array of instruments to create with. The rest is left to the clients taste and inspiration, giving them the opportunity to set their own trends and express their personality.

After a personalized and collaborative design process, Beckham and the designers created the MC20 Fuoriserie Edition for David Beckham. This car translates true passion into a carbonfibre monocoque, entirely Made in Italy, and powered by a patented V6 petrol engine derived from Formula 1 technologies.

The end result of this very personal sportscar is black and pink, a chromatic dichotomy, as well as the interplay between glossy and matt surfaces. The team colours are black and pink, and the team uniforms are characterized by contrasting glossy-matt treatments.

Starting from this as an inspiration, the bodywork features a glossy black tone which contrasts with the Trident logos on the grille and on the C-pillar, in black, but with an opaque finish. The Maserati lettering on the rear is also opaque, while the MC20 badge on the door is pastel pink, as are the Brembo brake calipers.

The interior, in leather and Alcantara, is black with contrast-stitching in pink. The backrests, in Alcantara, are worked with a tone-on-tone laser engraving method and the headrest features a 3-dimensional pastel pink embroidery. In the centre tunnel between the two seats is a personalized nameplate with a glossy-matte effect. At the top, next to the Trident, the Maserati Fuoriserie lettering is pastel pink, at the bottom are the italics ‘For David’ which appears with an aluminium effect.

“As car designers, our mission is to offer a holistic experience. This value guides our Brand’s stylistic research, making each Maserati uniquely recognizable. Our customization program is another example of our brand’s goal to create singular experiences for our customers: Maserati Fuoriserie is a blank canvas, on which Maserati clients can write their own stories and unleash their creativity, making their dreams come true,” said Klaus Busse, Head of Maserati Design.

“Designing this special edition MC20 with David, as with all our Fuoriserie projects, is also an ode to the Brand’s past, taking us back to a time when every car was hand-built to the client’s requests, giving life to a one-off, a true ‘fuoriserie’,” he explained.

“I have always been a car enthusiast, so to be part of designing and creating my MC20 through the Fuoriserie customisation programme has been an amazing experience. Cars are about individual taste whether it’s the model, colour or small personal details on the inside. It has been incredible to collaborate with the Maserati team and designers to create this one-off car that is inspired by my second home, Miami and my football club there. It is a joy to be behind the wheel,” said Beckham.

Bugatti Sur Mesur service takes customisation to the next level

When you pay over a million ringgit for a car, you would definitely want it to be special even though it is likely to be one of the few in the country. After all, if you can pay that much, what would be a few hundred thousand more to customize it to exactly how you like your car to be. The premium and luxury carmakers have such customization programs and now Bugatti also offers it officially with Bugatti Sur Mesure. The program is in response to ever-growing demand for personalized Bugatti creations.

Bugatti Sur Mesure, translated to English, means ‘tailored’, and it builds upon the marque’s distinguished history of coachbuilding, handcrafted interiors, paint finishes, embroidery and bodywork. The collective expertise of skilled designers and engineers is drawn upon for ultra-customized designs, materials and finishes.

As part of the official program, with one-to-one support from the Bugatti Sur Mesure Team, customers will be guided through the world of possibilities open to them. When configuring a Bugatti, the sheer number of exterior colours and leather finishes is nearly unlimited, but Bugatti Sur Mesure can take a further step and create a truly unique piece of personalized automotive art.

In recent years, Bugatti has showcased the depth of its ability to personalize its hyper sportscars to an ever greater degree. For example, in 2013, the Veyron ‘Les Legendes de Bugatti’ series saw 6 exclusive model editions, each personalized with unique exterior and interior finishes, celebrating individual heroes of the marque.

2019 witnessed the arrival of the Chiron1 ‘Zebra 1 of 1’ – a special commission for a customer in Qatar. Featuring an elaborate Titanic Blue and Gunpower Grey colour scheme, the car was hand painted by Bugatti’s talented craftspeople over the course of more than 3 weeks.

This year, the Divo2 ‘Lady Bug’ made its debut with a highly complex geometric-dynamic algorithmic fading pattern. The pattern was developed over 18 months for the Divo’s bodywork, illustrating how Bugatti will push the boundaries in making customers’ visions become reality.

The first official ‘Sur Mesure’ creation for a customer is a Chiron Pur Sport inspired by the 20th century heroics of renowned racing driver, Louis Chiron. Early racing pioneers who piloted Bugatti’s prototype racing cars continue to fascinate and are admired for their bravery and talent displayed on-track. Today, their spirit lives on and is the very source of the custom design of the unique Chiron Pur Sport.

Among Louis Chiron’s countless victories at the wheel of a Bugatti was his legendary 1931 win at the French Grand Prix, together with Achille Varzi, in a Bugatti Type 51 emblazoned with the number ‘32’. This number – painted entirely by hand – now adorns the sportscar as just one of a number of custom-made elements developed especially for this customer.

Two new exterior colours were created to pay homage to the legendary Grand Prix racing Bugattis of the 1920s and 1930s. The Bugatti Sur Mesure team also developed a new fading ‘EB’ painted pattern, applied meticulously by hand, which is complemented by a multi-layer stitched ‘EB’ motif on the door panels. Both required new techniques and processes to be developed.

The ‘32’ and ‘Grand Prix’ motifs continue throughout the cabin, including a special centre console inlay in black anodized aluminium, with a silver hand-painted inscription. The motifs extend to the door sills, headrests and entry lights. Subtle branding distinguishing the model as a rare and unique product of the program can also be found. Many of the customer’s ideas will also be available to more owners of the Chiron Pur Sport.

“For many years, we have worked with our clients to create their own personal vision of the ultimate hyper sports car. It has always been a highly tailored process but as an ever-increasing number of our clients request detailed and intricate customization, the launch of Bugatti Sur Mesure will ensure we can cater to their desires with the perfect level of detail required from a Bugatti,” said Hendrik Malinowski, Bugatti’s Managing Director for Sales and Marketing.

MANSORY’s complete conversion package makes the Aston Martin DBX even more exclusive

In the first 6 months of this year, 1,595 units of Aston Martin’s first SUV and first 5-seater were delivered to customers worldwide, joining the 1,516 units in 2020. That’s not a huge number by global industry standards so it is pretty exclusive (it should be for around RM1 million each) even if you get one in ‘standard’ form. But in that stratospheric segment, most customers want more exclusivity and personalisation, so the carmakers have special divisions to cater to such needs.

For those who prefer not to use the services of the carmaker, there are also companies that specialise in personalisation of any motor vehicle – in appearance, in fittings and even in upgrading performance. In recent years, such companies have given attention to SUVs, which even the luxury brands could not ignore.

MANSORY Aston Martin DBX 2021 — *MANSORY’s complete conversion package gives a more aggressive look to the standard DBX (below) while still maintaing the recognisable form.*

One of them is MANSORY, the 32-year old car modification firm based in Germany. MANSORY has already done a number of luxury SUVs and now with Aston Martin’s DBX also in the market, it offers a more exclusive model for those who must be different.

The company has developed a complete conversion for the SUV which includes upgrading of the engine by the Performance Department. The V8 twin-turbo engine of the DBX has its engine management system replaced and new and larger turbochargers are also installed. For better efficiency, a sports air filter and high-performance sports exhaust system are also installed.

The exhaust system is offered in two versions for customers to choose. They differ recognisably in the positioning of the tailpipes; either located in the area of the standard rear apron opening, or terminating as closely spaced double pipes in the middle of the carbonfibre rear apron.

After this engine conversion, the output rises to 800 ps from the standard 550 ps while torque hits 1,000 Nm, about 43% more than standard. This improves performance to a maximum speed of 325 km/h and 0 to 100 km/in a short 3.8 seconds (according to MANSORY’S tests).

The high-speed performance is helped by the refined aerodynamics of the vehicle. This results in an impressive wide-body styling in combination with optimised aerodynamics with increased downforce for significantly improved cornering performance at higher speeds. For this purpose, the front of the DBX is redesigned with a completely new apron including an integrated front lip made of carbonfibre. The ultra-light and painted carbonfibre bonnet with additional cooling air outlets (visible carbon) revises the front section.

On the flanks, MANSORY-designed extensions continue the design language and make the DBX look significantly more powerful, but also lower and more elongated. To increase the downforce on the rear axle, the engineers developed a special spoiler for mounting on the tailgate and a matching roof spoiler – both of which take up the design language of the standard tear-off edge of the tailgate and are also made entirely of carbonfibre.

In addition, a new rear apron with diffuser skilfully sets off the striking tailpipes of the sports exhaust system. Numerous carbonfibre components such as trim strips, mirror housings and air intake trims add further striking highlights, some of which are further accentuated with accents in the special Limegreen colour.

The DBX also features a new wheel design called ‘DX.5’ in 24×10 inch (front) and 24×12.5 inch (rear) dimensions with matching 295/30R24 and 355/25R24 tyre sizes. The rim design optimises ventilation of the brake system on the one hand and emphasises the car’s dynamic appearance.

These not only fill out the front and rear wheel arches coherently, but also combine both sportiness and technical elegance in the best possible way. The colour scheme of the rims was chosen to match the overall colour concept of the car – black and Limegreen.

The interior – matching the exterior design – is kept entirely in black. The Limegreen colour used to accentuate details on the exterior is also found in many places in the interior. The edging of the floor mats, the seats, the centre console, the decorative stitching on the dashboard and the sports steering wheel are all finished in this colour. Individually embroidered floor mats, the use of fine visible carbonfibre and the covering of almost all surfaces with the finest leather add further highlights to the handcrafted interior.

Innovative new process at BMW Group factory allows personalisation in painting (w/VIDEO)

Since the days of Henry Ford who said ‘you can have your car in any colour you want as long as it’s black’, the process of painting a car constantly evolved. In the earliest days, the work was done manually and took around 40 days to complete painting a car. Today, with automated processes using robots, the complete job can take about 18 hours (including passing through the oven). The principles are essentially the same but the technology has become more advanced to achieve higher quality, especially the finish.

However, one constraint in painting cars in factories that assemble them is that variations are very limited. Even the number of colours is controlled for optimization and for personalisation, the work has to be done outside of the normal process. Factory managers would love to do it Henry Ford’s way with just one colour.

However, in today’s market, customers want choice and those who can afford it also want a degree of personalisation. This is especially so in the premium luxury segment and the manufacturers even have special divisions to cater to such specific requirements.

Increasing scope of individualisation
At the BMW Group’s factory in Dingolfing, Germany, a new pilot painting process has begun where several paint colours can be used and designs applied without stencils or masking the vehicle as the process is free of overspray. This highly innovative application method not only increases the scope of individualisation for customers but also contributes to sustainability by reducing waste and energy consumption.

The process developed by the BMW Group, in collaboration with Durr (a well known company in this field) is known as EcoPaintJet Pro application. It applies waterborne base coats and 2K clear coat without electrostatics, relying instead on jet application. In the conventional procedure, paint is atomised by a rotating bell with 35 to 55,000 revolutions per minute and adheres electrostatically to the body.

Different approach to painting
The paint is applied using an orifice plate that enables high edge definition with a variable paint thickness of between 1 and approximately 50 mm. This requires maximum precision from both the robot and application technology. It also means two different colours of paint can be used, eg for a contrasting roof, with stripes and other designs applied on various parts of the bodywork.

The focus of technology and material development was on achieving the maximum range of applications. It will now be possible to paint every exterior component – offering customers virtually limitless options for individualisation.

No need for masking
Until now, custom designs like this can only be realised using manual masking, a time-consuming process. With the new technology, the material and personnel costs this previously entailed will be also eliminated, making it possible to realize these options at a lower cost. The precision of spraying means there is no overspray and therefore no excess paint particles to be disposed of.

A further contribution to sustainable production comes from lower energy consumption. Since paint separation is no longer required, the amount of air needed is also les. At around 7,000 operating hours, this results in energy savings of more than 6,000 megawatt hours and reduces the carbon footprint by nearly 2,000 tonnes per year.

BMW M4 Coupe used for trial run
The technology is being used for the first time for 19 BMW M4 Coupes. These will have custom two-tone paintwork and M4 identification on the bonnet and tailgate. With the paintwork for the M4 small series, the BMW Group is testing the possibilities of the new process. These unique vehicles will initially be used in the company’s own fleet. Wider use of the innovative paint process is scheduled to begin in 2022 when other factories in the BMW Group production network adopt it.

Video Player

Media error: Format(s) not supported or source(s) not found

Download File: https://www.piston.my/wp-content/uploads/2021/10/BMW-1.mp4?_=1

00:00

Use Up/Down Arrow keys to increase or decrease volume.

MILITEM FEROX-T is a Sport Utility Truck, not a mere pick-up truck

Pick-up trucks aren’t an Italian speciality and there are no models of note in this segment. However, when it comes to coachbuilding and customising vehicles, the Italians have a long history. Besides the well known names, there are also smaller outfits like MILITEM which creates automobiles for the premium-luxury market.

The company works exclusively with American vehicles and applies typical ‘Made in Italy’ craftsmanship. Its latest offering is the FEROX-T, a more upmarket truck that is referred to as a Spot Utility Truck (SUT). It is a premium luxury product and merges the ruggedness of its American background with the Italian flair.

Developed from Jeep model
The FEROX-T is developed from Jeep’s Gladiator Rubicon model, which already has all-terrain capability, a high-degree of functionality and versatility. It’s a fully engineered vehicle which combines the comfort of an SUV and the functionality of a pick-up.

What MILITEM has done is the enhance the characteristics of each and add a host of technical and content upgrades. In terms of performance and technical specifications, MILITEM would like to declare the FEROX-T as the ‘supercar among pick-ups’.

The bodywork has a strong, hi-tech and muscular image, unique in one sense but also maintaining the overall ‘family feeling’ of the MILITEM range. Features such as the brand’s emblematic honeycomb black grille (also available in carbonfibre), wide-body wheel arches (in carbonfibre or body-coloured) and MILITEM’s own 20-inch rims provide the exclusivity.

The FEROX roll-bar
A distinctive element is the FEROX Bar. This is a roll-bar which is more stylish than the original and allows the retractable LED headlights to be fitted. Also available as an option is the cargo bed in a hi-tech nautical material (customers can select their own colour).

The FEROX-T also has motorised retractable running boards, new smoked ‘Neutral fume’ front and rear lights, door rim puddle lights and can also be equipped with an LED lightbar in the front bumper. The two Black Performance tailpipes are in-house design features. They have a Dual-Mode function to enhance the SUT’s twin personality: a button on the centre console modifies the exhaust notes.

Comfortable, luxurious enclosure
The cabin is a comfortable and luxurious enclosure with refinement and high-grade materials. Customers get Italian leather upholstery on the seats fitted by hand and the option to select Alcantara inserts. Personalisation is, of course, possible with a wide range of leather, fabric (including denim) and technical fabrics.

The all-black detailing adds an extra touch of luxury and sportiness to the cabin. The centre console houses a button that activates the multi-coloured ambient lighting, another exclusive touch.

V6 power with Rock-Trac 4×4 system
The FEROX-T uses the same engine that comes with the Gladiator Rubicon, a 285 bhp/353 Nm 3.6-litre V6 petrol engine. An 8-speed automatic transmission and 4×4 Rock-Trac system drives all four wheels. MILITEM engineers have tuned the suspension and there are twin-tank dampeners in aluminium and finished in carbonfibre.

Pricing for the FEROX-T in Italy starts from 97,490 euros (about RM473,000) and the warranty in European markets is 36 months/100,000 kms but can be extended to 72 months with unlimited mileage.

BMW iX Configurator allows customers to personalise their all-electric SAV easily

Those who are planning to buy the new BMW iX can personalise it with a configurator provided by BMW Malaysia, allowing them to include add-on packages. The wide range of packages are available to customers who have already pre-booked their cars as well as potential customers who are planning to book the iX xDrive40 before October 12, 2021.

Introducing the BMW iX Configurator, Hans de Visser, Managing Director of BMW Group Malaysia said: “Providing opportunities for unique configurations of our next-generation BMW i vehicles is synonymous with our vision for the BMW i. In offering a fleet of powerful vehicles that are fully electric to our traditionally fuel-powered portfolio, we are also giving our loyal customers the Power of Choice to personalise their BMW vehicles according to their ownership needs – be it additional comfort, elegant interior fittings, or more safety and driving features, their options are open for the upcoming First-Ever BMW iX xDrive40 and BMW iX xDrive40 Sport.”

There are 7 packages to choose from, each package is individually tailored to enhance specific aspects of the driving experience for the new all-electric Sports Activity Vehicles (SAVs). The packages are the Power Package, Design Package, Luxury Package, Iconic Package, Technology Package, Interior Upholstery Package, the latter having 2 premium upholstery options. Package prices range from RM3,020 to RM33,490.

With the Iconic Package, customers will also get the BMW IconicSounds Electric feature which generates an engine sound to match the driving dynamics, enhancing the emotion of the sports driving experience. IconicSounds is delivered through the audio system, and is tailored to 3 driving modes: Personal, Efficient and Sport.

The Luxury Package includes a Panorama Glass Roof Sky Lounge which becomes opaque or transparent at the touch of a button. This special effect is achieved by the alignment of liquid crystals in a film on the glass roof.

Pre-booking of the iX xDrive40 and iX xDrive40 Sport can be made on the BMW Shop Online platform with a fee of RM5,000. Customers who purchase BMW i models will enjoy a battery warranty of up to 8 years or 160,000 kms, whichever comes first. Owners of any of the new iX models can opt to have a BMW 5-Year Extended Warranty and 6-Year Service package at a special rate of RM16,170.

To know more, visit any authorised BMW dealership or visit www.bmw.com.my.

Vaccination does not make you immune to COVID-19 infection. You can still get infected and although you may not show symptoms, you could spread the coronavirus to others. Do not stop taking protective measures such as wearing a facemask, washing hands frequently and social distancing.

Clive Sutton customises the LEVC TX to become the world’s most luxurious taxi

The Zhejiang Geely Holding Group (commonly referred to as Geely) now owns many car companies, including Proton, but did you know that it also owns a company in England that originally produced the famous Black Cabs. Known today as the London EV Company Limited (LEVC), it was acquired in 2013 and has focussed on developing electrically-powered commercial vehicles.

Environment-friendly taxis
LEVC continues to produce taxis but they are environment-friendly vehicles now with zero emission electric powertrains. Due to their iconic background, the taxis are sometimes used for more than just ordinary transport and are purchased for more personalised use. One company which specialises in turning them into luxury models is luxury car specialist Clive Sutton.

Customisation for VIP taxis
The company’s bespoke coachbuilding division has developed customisation options for VIP LEVC Taxis. These can be appointed like a private jet for the road, with separated driver and passenger compartments. Customers can opt for a long list of luxury fittings from leather-clad, electronically-reclining heated rear seats with footrests, to a fibreoptic starlight roof, or electronic self-closing doors. Other features include built-in umbrella holders and a high-quality audio system.

Multiple seating configurations
The Sutton Bespoke team has created multiple configurations in which the taxi can be ordered. Customers can choose from a 4, 3, or even an ultra-spacious 2-seat set-up with a drinks fridge, on-board WiFi and Bluetooth as standard. Privacy can be upgraded as part of an optional exterior package that includes smoke-tinted rear windows, while a PlayStation or Xbox can be added for those with younger ones. The console is connected to a 20-inch media screen that is incorporated within a leather-clad divider, which separates the front and rear compartments.

“While many of our clients seek power, performance and stand-out style, another portion prefer discreet, unique, customisable luxury. Our Sutton VIP LEVC Taxi enables the most comfortable, spacious and private journey through the city with extravagant features usually reserved for superyachts and private jets,” said Clive Sutton, Founder and CEO of the company.

ECity range-extender
The LEVC TX Taxi uses the company’s ECity technology and is powered by an electric motor which drives the rear wheels. The motor is powered by a 31 kWh Drive Battery supported by a range-extender. This is an on-board generator (a small 1.5 litre petrol engine) that recharges the battery when required, and provides greater usability and flexibility than pure electric operation.

Running only on electric power on a typical driving pattern, the TX has a pure electric range equivalent to many of today’s BEVs (Battery Electric Vehicles). To further maximise the range offered by driving on electrical power, there is also regenerative coasting and braking. The braking system harnesses energy that would usually be lost while slowing down, and uses it to recharge the drive battery. This increases efficiency and reduces wear on braking components.

Fresh coffee wherever you want it with Suzuki Jimny Beans

In this age of increasing food trucks and mobile food services, here’s an idea from Suzuki’s British subsidiary which turns the Suzuki Jimny into a mobile coffee bar. The conversion of the compact SUV was carried out by Coffee Latino, which specializes in such projects.

The vehicle has a Chiffon Ivory Pearl metallic finish with Bluish Black roof and is nicknamed ‘Jimny Beans’. It will be used by the company for promotional activities in the UK, offering complimentary coffee at the venues.

The conversion makes maximum use of space within the compact dimensions of the vehicle. The front passenger’s seat was removed to accommodate all the services required which include a 57-litre water tank with 3M filtration system to ensure the water is clean. A compact 12V drawer fridge manufactured by Waeco is also fitted which cools milk to -2 degrees Centigrade.

At events, the vehicle can run on either gas or mains electricity with power inverter and has two additional large capacity 125A/H 12V batteries to assist with power if required. For gas, a LPG tank was installed in the limited space under the rear floor section which required a specially designed exhaust system with side exit pipe. And with its 4×4 drivetrain, the little Suzuki can also be taken off-road to camp sites or the beach for fresh coffee.

The high specification coffee machine, manufactured by Fracino, is fully integrated into the rear section of the vehicle with an aluminium-topped work area and milled aluminium effect panel surround. It has the facility to serve two speciality coffees at the same time via its twin milk frothing units as well as central hot water dispenser for tea.

The Jimny Beans project is typical of the services offered by 15-old family-run Coffee Latino. They offer bespoke and flexible solutions for customers who have different types of vehicles. Additionally, there is also free barista training along with training to operate the equipment safely and properly. For those who want to venture into this type of business, Coffee Latino has lease purchase on its coffee vans, coffee bikes, prosecco vans and other mobile catering solutions.

NOVITEC’s SPOFEC unit refines and enhances performance of Rolls-Royce Ghost

To own a Rolls-Royce would be a dream for most people but for those who can make their dreams come true, personalisation of the car is now a very common thing. Rolls-Royce says that virtually every car they have sold in recent years has had some degree of personalisation provided by their Bespoke division.

Some owners may prefer to have the services of other companies and for this, they can contact SPOFEC, a unit in the NOVITEC Group which can refine the cars further. They can now offer their services for the latest Ghost, the sportiest interpretation of a Rolls-Royce sedan ever. In fact, SPOFEC works only on Rolls-Royce cars, which is how its name came about (SPirit OF ECstasy).

The company has developed a customization range for the car which gives the Ghost even greater driving dynamics and an even more extravagant appearance. For example, SPOFEC engine tuning raises the output of the twin-turbo 12-cylinder engine to 685 bhp (114 bhp more) and also bumps peak torque to 958 Nm. This cuts the sprint time from 0 – 100 km/h to 4.5 seconds although the top speed remains limited to 250 km/h.

To match the improved driving dynamics, SPOFEC gives the new Ghost an even more athletic design with carbonfibre bodywork components that feature sporty and elegant styling. SPOFEC forged wheels with a diameter of 22 inches developed in cooperation with US rim manufacturer Vossen fill out the wheel wells perfectly. With the SPOFEC suspension module, the ride height is lowered by about 40 mm.

A standard peak output of 571 bhp/850 Nm mean that there are quite a few reserves in the 6.75-litre engine of the Ghost. SPOFEC engine specialists have programme the plug-and-play N-TRONIC module for the electronic engine control unit which introduces new mapping for injection and ignition. There is also a moderate increase in the boost pressure.

SPOFEC optionally underscores these significantly improved dynamics with a more thrilling sound as well. To this end, the company developed a stainless sport exhaust with actively controlled exhaust flaps. It enables the driver to select either a decidedly discreet or a very powerful exhaust note from inside the cockpit by remote control.

For a sporty-elegant touch, the designers at SPOFEC developed tastefully styled and aerodynamically efficient bodywork components for both wheelbase variants of the Ghost. The components are produced from lightweight yet high-strength carbonfibre.

The SPOFEC-designed front fascia gives a fresh face with large air intakes making for a visually striking appearance. The front end also generates less front-axle lift at high speeds and thus further optimizes the directional stability. The new aerodynamic-enhancement component optionally also comes with LED position markers and perfectly transitions to the likewise new SPOFEC front fenders. These fenders feature a distinctive air outlet behind the wheel arch on either side.

The wheels have 9 pairs of twin-spokes extending all the way to the outer flange, characterizing the SPOFEC SP2 design. In sizes 9.5Jx22 at the front and 10.5Jx22 on the rear axle, they are fitted with tyres of sizes 265/35 ZR 22 and 295/30 ZR 22 and optimally fill out the available space under the wheel arches.

The SPOFEC CAN-Tronic suspension module is specifically calibrated to work with the 22-inch tyres. At speeds up to 140 km/h, the new programming of the Ghost’s air suspension lowers the vehicle by about 40 mm compared to the production car. At higher speeds, the vehicle body automatically reverts to the standard level.

Piston.my

Customisation

The ‘Godfather of Pickups’ from BRABUS

David Beckham creates a Maserati MC20 that is truly his own

Bugatti Sur Mesur service takes customisation to the next level

MANSORY’s complete conversion package makes the Aston Martin DBX even more exclusive

Innovative new process at BMW Group factory allows personalisation in painting (w/VIDEO)

MILITEM FEROX-T is a Sport Utility Truck, not a mere pick-up truck

BMW iX Configurator allows customers to personalise their all-electric SAV easily

Clive Sutton customises the LEVC TX to become the world’s most luxurious taxi

Fresh coffee wherever you want it with Suzuki Jimny Beans

NOVITEC’s SPOFEC unit refines and enhances performance of Rolls-Royce Ghost

Ferrari Tightens Control Over Customisation and Buyer Eligibility

Lotus Introduces Bespoke Service for Customised Vehicle Personalisation

Full Conversion Of Maserati MC20 Into Mansory First Edition Now Available

MILITEM turns the Jeep Wrangler into a luxury Extreme Utility Vehicle

Rolls-Royce to present second Coachbuilt Boat Tail at Concorso d’Eleganza, Villa d’Este 2022 this weekend

Tailor Made Ferrari Roma brings together Italian with Japanese-inspired detailing

Rolls-Royce Motor Cars Dubai commissions the Carbon Veil for The Gallery in the Phantom

THE 8 X JEFF KOONS – most elaborately designed vehicle in all of BMW’s history

Porsche 911 reimagined by Singer, now available with turbocharging too

Rolls-Royce customer in Singapore personalises Phantom with country’s national flower

Archive

Nissan to Slash 10,000 More Jobs Amid Mounting Losses and Fading Prospects

Nissan Confirms the GT-R’s Return, but Details Remain Unclear

Mazda’s Next-Generation MX-5 to Remain Light, Manual, and Naturally Aspirated

Hyundai Unveils Next-Generation Hybrid Powertrain with Blend of Performance and Efficiency

EU Proposal to Classify Carbon Fibre as Hazardous Threatens Automotive and Aerospace Industries

Follow us on Facebook

Follow us on YouTube

The Piston Show